My Garage
My Account
Cart
Genuine Chevrolet Tracker Window Regulator
Electric Power Window Regulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
14 Window Regulators found
Chevrolet Tracker Window Regulator
The Window Regulator in Chevrolet Tracker automobiles is used to up and down a vehicle's windows making them operational for occupants. This mechanical assembly is optional and it has an electric motor that can be used to power it or it can be operated using a crank depending on the model of Chevrolet Tracker. Chevrolet Tracker has navigated both scissor type Window Regulator and cable type Window Regulators in the course of the years. These tellering solutions come in different models to suit the operators' requirements and exists in various types which have been designed and developed to suit the required OEM for optimal fitment and performance. A Window Regulator should therefore be maintained or replaced frequently because their deteriorating condition affects its efficiency and functionalities such as being stuck.
Each OEM Chevrolet Tracker Window Regulator we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Tracker Window Regulator Parts Questions & Experts Answers
- Q: How do you remove and install the door window regulator and adjust the window alignment on Chevrolet Tracker?A: Take off the accessory panel and the water shield of the door. With the curved tool remove the molding pieces on the upper part of the door, there are two pieces of it. The glass mounting screws are in the bottom and have to be taken out, with the window down first, then lifting the glass out from the top of the door. Again lift the glass slowly in the upward motion and slightly turn it so as to remove the channel. Next, the Window Regulator mounting screws are to be unscrewed and the Window Regulator to be taken off through the larger access hole, in case of Sidekick/X-90/Vitara as well as Tracker models. When installing the Window Regulator and guide channel, be sure and use a light coat of lithium-based grease on all slide areas. In the case of installation, the process should be done in the reverse of the removal process. After installation of the window, pull up the window fully, and ensure it fits properly into the channel. The angle of the window can be switched by unscrewing the Window Regulator retaining screws and then sliding the glass so that the top edge is in line with that of the door, before screws are tightened again. In order to find the right position of the glass when the window is in the fore and aft position, turn the Window Regulator retaining screws and ensure that the rear edge of the glass and the upper rear corner fits well on the rubber of the door frame before tightening the retaining screws.
Related Chevrolet Tracker Parts
Chevrolet Tracker Seat Belt
Chevrolet Tracker Wiper Blade
Chevrolet Tracker Power Window Switch
Chevrolet Tracker Mirror Switch
Browse by Year
2004 Window Regulator 2003 Window Regulator 2002 Window Regulator 2001 Window Regulator 2000 Window Regulator 1999 Window Regulator 1998 Window Regulator 1997 Window Regulator 1996 Window Regulator 1995 Window Regulator 1994 Window Regulator 1993 Window Regulator 1992 Window Regulator 1991 Window Regulator 1990 Window Regulator 1989 Window Regulator