How do you remove and install the stabilizer bar on Chevrolet Tracker?

To remove the Sway Bar Kit, first apply the parking brake, raise the front of the vehicle, and support it securely on jackstands. For Samurai models, detach the Sway Bar Kit by removing the bolts connecting it to the leaf spring plate and the bracket bolts, then pull off the brackets and inspect the bushings for any damage, replacing them if necessary. For Sidekick and Tracker models, check for alignment paint marks on the bushings before removal; if absent, mark them to assist with centering during reinstallation. Remove the Sway Bar Kit ball joint from the front suspension lower arms, noting the arrangement of spacers, washers, and bushings, and then detach the bar from the vehicle. For installation on Samurai models, position the bushings on the bar with slits facing upward, attach the brackets, and raise the bar to the frame, installing the bracket bolts without fully tightening them. Next, install the Sway Bar Kit-to-lower control arm components and securely tighten the nuts before finally tightening the bracket bolts. For Sidekick/X-90/Nitara/Tracker models, position the bushings with slits facing the front and align them with the previously made marks, then follow the same procedure for attaching the brackets and installing the Sway Bar Kit ball joint.

Genuine Chevrolet Tracker Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Kits found

View related parts
Chevrolet Tracker Shaft,Front Stabilizer
Part Number: 96058612
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1998 Chevrolet Tracker | 2 DOOR HARD TOP, 4 DOOR, CONVERTIBLE | 4 Cyl 1.6L
View related parts
Chevrolet Tracker Bar,Front Stabilizer (On Esn)
Part Number: 30020918
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | 4 DOOR | 4 Cyl 2.0L, 6 Cyl 2.5L
View related parts
Chevrolet Tracker Bar,Front Stabilizer (On Esn)
Part Number: 30021923
Product Specifications
- Other Name: SHAFT, Stabilizer; Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | CONVERTIBLE | 4 Cyl 1.6L, 4 Cyl 2.0L

Chevrolet Tracker Sway Bar Kit

The Sway Bar Kit in Chevrolet Tracker automobiles found has the important responsibility of improving the stability and control of the car. Through linking two points of the suspension system concerning in the vertical plane, the Sway Bar Kit minimizes the sideways movement of body, known as roll, during turn and over bumps. This is done by a torsion springing mechanism that increases roll stiffness without having any effect on vertical spring rate and therefore ensures better traction without a lot of side to side rocking. In different years of manufacturing Chevrolet Tracker, possible variants of Sway Bar Kits include but are not limited to adjustable Sway Bar Kits and active Sway Bar Kits. There are new generation Sway Bar Kits available in the market, which can offer variable level of stiffness to enhance its handling ability as well as the comfort. Despite serving the purpose of reducing the amount of body lean during cornering, conventional Sway Bar Kits are also capable of passing the shock between the wheels and therefore the car may experience a kind of "waddling" on rough surfaces. In my opinion, the Sway Bar Kit plays a crucial role for the Chevrolet Tracker to sustain its performance and handling.

Each OEM Chevrolet Tracker Sway Bar Kit we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Tracker Sway Bar Kit Parts Questions & Experts Answers

Bar,Front Stabilizer (On Esn)
30021923
Q: How do you remove and install the stabilizer bar on Chevrolet Tracker?
A: To remove the Sway Bar Kit, first apply the parking brake, raise the front of the vehicle, and support it securely on jackstands. For Samurai models, detach the Sway Bar Kit by removing the bolts connecting it to the leaf spring plate and the bracket bolts, then pull off the brackets and inspect the bushings for any damage, replacing them if necessary. For Sidekick and Tracker models, check for alignment paint marks on the bushings before removal; if absent, mark them to assist with centering during reinstallation. Remove the Sway Bar Kit ball joint from the front suspension lower arms, noting the arrangement of spacers, washers, and bushings, and then detach the bar from the vehicle. For installation on Samurai models, position the bushings on the bar with slits facing upward, attach the brackets, and raise the bar to the frame, installing the bracket bolts without fully tightening them. Next, install the Sway Bar Kit-to-lower control arm components and securely tighten the nuts before finally tightening the bracket bolts. For Sidekick/X-90/Nitara/Tracker models, position the bushings with slits facing the front and align them with the previously made marks, then follow the same procedure for attaching the brackets and installing the Sway Bar Kit ball joint.

Related Chevrolet Tracker Parts

Browse by Year

2004 Sway Bar Kit 2003 Sway Bar Kit 2002 Sway Bar Kit 2001 Sway Bar Kit 2000 Sway Bar Kit 1999 Sway Bar Kit 1998 Sway Bar Kit 1997 Sway Bar Kit 1996 Sway Bar Kit 1995 Sway Bar Kit 1994 Sway Bar Kit 1993 Sway Bar Kit 1992 Sway Bar Kit 1991 Sway Bar Kit 1990 Sway Bar Kit 1989 Sway Bar Kit