My Garage
My Account
Cart
Genuine Chevrolet Tracker Coil Springs
Strut Spring- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
17 Coil Springs found
Chevrolet Tracker Rear Coil Spring (On Esn)
Part Number: 30021921$75.99 MSRP: $145.54You Save: $69.55 (48%)Ships in 1-2 Business Days
Chevrolet Tracker Coil Springs
The Chevrolet Tracker cars use coils springs in their suspension system and its primary function is to provide support to the car by sustaining the weight of the car and also to facilitate 'shock absorption' on terrains that are irregular. They assist to keep the correct height of the car, avoid it from saggings or bottoming out as well as irregular wearing off of the tires. Normally, coil springs are reusable, but once you have some issues with them, they can be replaced, using new coils springs of new models' specifications for new cars or used reproductions for antique cars. Several sorts of the coil springs have been incorporated in the Chevrolet Tracker car including the linear rate spring, the progressive spring, and the dual rate spring as well. Linear rate springs, on the other hand, offer a relatively static stiffness while progressive springs offer a smoother ride and higher stiffness on heavier loads. Dual rate springs operate at two rates, one fast and the other slow rate in order to increase performance. Besides, coil springs are a bit flexible and can be readjusted to meet changes in wheel and tire sizes in regards to ride height. All in all it can be summed up that the Chevrolet Tracker coil springs are of significant importance in providing the necessary balance and comfort while driving.
Each OEM Chevrolet Tracker Coil Springs we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Tracker Coil Springs Parts Questions & Experts Answers
- Q: How Do You Remove and Install front Coil Springs on Chevrolet Tracker?A: To remove the components, one has pull out the wheel lug nut on the side that will be dismantled and then lift the vehicle and secure it on a jackstands before removing the wheel. Then, remove the locking hub on 4WD models or the end cap on 2WD models, and then the front driveaxle snap-ring and washer. Then, unscrew the brake caliper and position it to the side using a wire to ensure that it does not fall off, also; pull out the brake disc. Remove the nut of the stabilizer bar joint and thereby unbolt the joint rearwards from the lower control arm and unbolt the tie-rod end from the Steering Knuckle. Lift the car laterally and place it on a stand, then insert a jack to lift the lower suspension arm and finally remove the steering knuckle. Gradually release the jack until the entire length of the coil spring is deployed, and then remove the coil spring. For installation, guide the small diameter end of the coil spring up into the upper pocket and have the larger diameter end rest on the spring seat area of the control arm. The rest of the installation process is opposite to the disassembly process in order the verification that all the fasteners are tightened to the correct torque.
Related Chevrolet Tracker Parts
Chevrolet Tracker Shock Absorber
Chevrolet Tracker Coil Spring Insulator
Chevrolet Tracker Rear Crossmember
Chevrolet Tracker Shock And Strut Mount
Chevrolet Tracker Front Cross-Member