How to replace the receiver/drier and condenser on Chevrolet Tracker?

The receiver/drier should be replace whenever there is a replacement of the condenser. To start with, the some steps that ought to be followed are to first cycle the air conditioning system. Secondly, remove the negative cables from the battery then remove the grille and the front bumper as well. Disconnect the electric connections of the dual-pressure switch and the condenser fan. Refrigerant lines must be disconnected and this is done by unscrewing the screws required to release the condenser; the condenser is mounted on the car by four clamps, one from each comer. Unbolt and unbend the condenser brackets together with the auxiliary electric fan which should not be used. Gently raise the condenser out of the vehicle and seal the lines so that dust and moisture cannot get in. In cases where the original condenser will be reused position it with the line fittings on top to prevent oil drainage. Upon purchasing a new condenser you must introduce one ounce of such refrigerant oil before installation. Lastly, replace the components in the same sequence with the rubber insulator pads properly positioned and get the system back to the shop which discharged it to get a vacuum, recharge and leakage test.

Genuine Chevrolet Tracker A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 A/C Condensers found

View related parts
Chevrolet Tracker Condenser,A/C
Part Number: 30011736
Product Specifications
- Other Name: CONDENSER, A/C Condenser; Condenser
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1998 Chevrolet Tracker | 2 DOOR HARD TOP, 4 DOOR, CONVERTIBLE | 4 Cyl 1.6L
View related parts
Chevrolet Tracker Condenser (On Esn)
Part Number: 91176896
Product Specifications
- Other Name: CONDENSER, A/C Condenser; Condenser
- Replaces: 91175044
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Tracker | 4 DOOR, CONVERTIBLE | 4 Cyl 1.6L, 4 Cyl 2.0L, 6 Cyl 2.5L
View related parts
Chevrolet Tracker Condenser
Part Number: 96061214
Product Specifications
- Other Name: CONDENSER, A/C Condenser
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1993 Chevrolet Tracker | 2 DOOR HARD TOP, CONVERTIBLE | 4 Cyl 1.6L
View related parts
Chevrolet Tracker Condenser,A/C
Part Number: 91172820
Product Specifications
- Other Name: CONDENSER, A/C Condenser; Condenser
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1998 Chevrolet Tracker | 4 DOOR | 4 Cyl 1.6L

Chevrolet Tracker A/C Condenser

In Chevrolet Tracker vehicles, A/C condenser plays a significant role of heat exchanger responsible for cooling the gaseous refrigerant with a view of converting it to liquid form before being transported to the accumulator. Located before the radiator, the A/C Condenser is an elaborate system including a number of tubes within which this cooling takes place. The changes in the years might have seen different designs of A/C Condensers for different models of Chevrolet Tracker as observed but specific difference in design is not elaborated. Still, the major function of the A/C Condenser does not differ much between these models and is used to cool the refrigerant that controls air conditioning of the car.

Each OEM Chevrolet Tracker A/C Condenser we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Tracker A/C Condenser Parts Questions & Experts Answers

Condenser,A/C
91172820
Q: How to replace the receiver/drier and condenser on Chevrolet Tracker?
A: The receiver/drier should be replace whenever there is a replacement of the condenser. To start with, the some steps that ought to be followed are to first cycle the air conditioning system. Secondly, remove the negative cables from the battery then remove the grille and the front bumper as well. Disconnect the electric connections of the dual-pressure switch and the condenser fan. Refrigerant lines must be disconnected and this is done by unscrewing the screws required to release the condenser; the condenser is mounted on the car by four clamps, one from each comer. Unbolt and unbend the condenser brackets together with the auxiliary electric fan which should not be used. Gently raise the condenser out of the vehicle and seal the lines so that dust and moisture cannot get in. In cases where the original condenser will be reused position it with the line fittings on top to prevent oil drainage. Upon purchasing a new condenser you must introduce one ounce of such refrigerant oil before installation. Lastly, replace the components in the same sequence with the rubber insulator pads properly positioned and get the system back to the shop which discharged it to get a vacuum, recharge and leakage test.

Related Chevrolet Tracker Parts

Browse by Year

2004 A/C Condenser 2003 A/C Condenser 2002 A/C Condenser 2001 A/C Condenser 2000 A/C Condenser 1999 A/C Condenser 1998 A/C Condenser 1997 A/C Condenser 1996 A/C Condenser 1995 A/C Condenser 1994 A/C Condenser 1993 A/C Condenser 1992 A/C Condenser 1991 A/C Condenser 1990 A/C Condenser 1989 A/C Condenser