How do you remove Canister Purge Valves and Vapor Canister on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To remove the EVAP canister purge solenoid on a V6 model, start by removing the air intake duct and disconnecting the electrical connector and EVAP purge line quick-connect fitting from the solenoid. Then, remove the mounting nut and the solenoid itself. For a V8 model, follow the same steps but also cap both EVAP purge lines before disconnecting the inlet purge line quick-connect fitting. To remove the EVAP canister vent solenoid, disconnect the electrical connector and quick-connect fittings from the solenoid and remove it from its mounting bracket. To remove the EVAP canister, label and disconnect all EVAP hoses connected to it, remove the mounting nut, and remove the canister from its bracket. Finally, to remove the fuel tank pressure sensor, remove the fuel tank and the sensor from the fuel pump/fuel level sending unit mounting flange. Installation for all components is the reverse of removal.

Genuine Chevrolet Tahoe Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Canister Purge Valves found

View related parts
Chevrolet Tahoe Valve,Evap Emission Canister Purge Solenoid
Part Number: 1997279
$36.99 MSRP: $74.80
You Save: $37.81 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control; Purge Control Valve, Purge Solenoid, Purge Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Tahoe | 4 DOOR 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex
View related parts
Chevrolet Tahoe Valve,Evap Emission Canister Purge Solenoid
Part Number: 1997277
$38.19 MSRP: $77.22
You Save: $39.03 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Tahoe | 4 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 5.7L
View related parts
Chevrolet Tahoe Valve Assembly, Evap Emission Canister Purge Solenoid
Part Number: 12597567
$33.39 MSRP: $63.00
You Save: $29.61 (47%)
ADD TO CART
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control
- Replaces: 12606684, 12570469, 12597566, 12597341
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Chevrolet Tahoe | 4 DOOR 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex
View related parts
Chevrolet Tahoe Valve Assembly, Evap Emission Canister Purge Solenoid
Part Number: 12630282
$35.89 MSRP: $67.70
You Save: $31.81 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control; Purge Control Valve, Purge Solenoid, Purge Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2021 Chevrolet Tahoe | 1500 4 DOOR UTILITY, 4 DOOR 1/2 TON | 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
Chevrolet Tahoe Valve Assembly, Evap Emission Canister Purge Solenoid
Part Number: 12581282
$32.49 MSRP: $61.28
You Save: $28.79 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control
- Replaces: 12581283, 12576688, 89017383, 12582627, 12573220
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chevrolet Tahoe | 4 DOOR 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex
View related parts
Chevrolet Tahoe Valve,Evap Emission Canister Vent Solenoid
Part Number: 15759044
$32.51 MSRP: $61.34
You Save: $28.83 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Chevrolet Tahoe | 4 DOOR 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L
View related parts
Chevrolet Tahoe Valve,Evap Emission Canister Control
Part Number: 12559015
$23.50 MSRP: $44.34
You Save: $20.84 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control; Control Valve, Purge Solenoid
- Replaces: 12554534
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Tahoe | CLASSIC 4 DOOR 1/2 TON
View related parts
Chevrolet Tahoe Solenoid Asm,Evap Emission Canister
Part Number: 25932571
$26.87 MSRP: $48.20
You Save: $21.33 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SOLENOID, Fuel Tank Evaporator/Purge Control
- Replaces: 22728634, 10382105, 15750484
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chevrolet Tahoe | 4 DOOR 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex
View related parts
Chevrolet Tahoe Solenoid Assembly, Evap Emis Cnstr
Part Number: 84972608
$57.18 MSRP: $118.72
You Save: $61.54 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emission Filter, Vent Control Solenoid
- Replaced by: 85133242
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Chevrolet Tahoe | 4 DOOR 1/2 TON | 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
Chevrolet Tahoe Valve,Evap Emission Canister Purge Solenoid
Part Number: 1997201
$36.92 MSRP: $66.21
You Save: $29.29 (45%)
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Tahoe | CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 5.7L
View related parts
Chevrolet Tahoe Valve,Evap Emission Canister Purge Solenoid
Part Number: 1997258
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chevrolet Tahoe | CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 5.7L
View related parts
Chevrolet Tahoe Solenoid Assembly, Evap Emission Canister
Part Number: 15220024
Product Specifications
- Other Name: SOLENOID, Fuel Tank Evaporator/Purge Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Tahoe | 4 DOOR 1/2 TON
View related parts
Chevrolet Tahoe Valve Asm,Evap Emission Canister Vent Solenoid (W/ Bracket)
Part Number: 17113529
Product Specifications
- Other Name: VALVE, Fuel Tank Evaporator/Purge Control; Vapor Canister Bracket
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chevrolet Tahoe | CLASSIC 4 DOOR 1/2 TON | 8 Cyl 5.7L

Chevrolet Tahoe Canister Purge Valves

Each OEM Chevrolet Tahoe Canister Purge Valves we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Tahoe Canister Purge Valves Parts Questions & Experts Answers

Valve Assembly, Evap Emission Canister Purge Solenoid
12597567
Q: How do you remove Canister Purge Valves and Vapor Canister on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove the EVAP canister purge solenoid on a V6 model, start by removing the air intake duct and disconnecting the electrical connector and EVAP purge line quick-connect fitting from the solenoid. Then, remove the mounting nut and the solenoid itself. For a V8 model, follow the same steps but also cap both EVAP purge lines before disconnecting the inlet purge line quick-connect fitting. To remove the EVAP canister vent solenoid, disconnect the electrical connector and quick-connect fittings from the solenoid and remove it from its mounting bracket. To remove the EVAP canister, label and disconnect all EVAP hoses connected to it, remove the mounting nut, and remove the canister from its bracket. Finally, to remove the fuel tank pressure sensor, remove the fuel tank and the sensor from the fuel pump/fuel level sending unit mounting flange. Installation for all components is the reverse of removal.