How do you replace the shift motor from the axle tube on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To remove the 4WD actuator from the axle tube, first raise the front of the vehicle and support it securely on jackstands. If equipped, remove the differential carrier splash shield. Then, disconnect the electrical connector from the 4WD actuator and unscrew the actuator from the axle tube. Before installing the actuator, coat the threads with RTV sealant and tighten it securely.

How to remove and install an electric shift motor/actuator assembly from Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL's transfer case?

To remove the electric shift motor/4WD actuator assembly from a vehicle's transfer case, first raise the vehicle and place it securely on jackstands. Then, remove the stone shields from below the transfer case and unplug the shift motor electrical connector. Unscrew the retaining bolts and remove the assembly. To install, inspect the seal for damage and replace if necessary. Position the gasket and 4WD actuator in place on the transfer case and install the bolts, tightening them to the specified torque. Finally, reverse the removal steps.

Genuine Chevrolet Tahoe 4WD Actuator

Four-Wheel Drive Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 4WD Actuators found

View related parts
Chevrolet Tahoe Actuator,Front Drive Axle
Part Number: 26060073
$138.82 MSRP: $241.60
You Save: $102.78 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: ACTUATOR, Front Drive Axle Shifter/Lock; Actuator, Switch, Switch Actuator
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2014 Chevrolet Tahoe | 4 DOOR 1/2 TON, CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.5L Diesel
View related parts
Chevrolet Tahoe Actuator Assembly, Front Drive Axle
Part Number: 22876132
$151.20 MSRP: $263.16
You Save: $111.96 (43%)
ADD TO CART
Product Specifications
- Other Name: ACTUATOR, Front Drive Axle Shifter/Lock; Actuator, Engagement Switch
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Chevrolet Tahoe | 1500 4 DOOR UTILITY | 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
Chevrolet Tahoe Actuator Assembly, Front Drv Axle
Part Number: 84651328
$107.31 MSRP: $168.84
You Save: $61.53 (37%)
ADD TO CART
Product Specifications
- Other Name: Actuator
- Position: Front
- Replaces: 23243764
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Chevrolet Tahoe | 4 DOOR 1/2 TON | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
Chevrolet Tahoe Actuator,Front Drive Axle
Part Number: 26013495
Product Specifications
- Other Name: ACTUATOR, Front Drive Axle Shifter/Lock; Actuator, Switch
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Tahoe | CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 5.7L, 8 Cyl 6.5L Diesel
View related parts
Chevrolet Tahoe Actuator Assembly, Front Drv Axle
Part Number: 84648804
$137.77 MSRP: $217.75
You Save: $79.98 (37%)
Product Specifications
- Other Name: Actuator
- Position: Front
- Replaced by: 85073905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Tahoe | 4 DOOR 1/2 TON | 6 Cyl 3.0L Diesel, 8 Cyl 5.3L, 8 Cyl 6.2L

Chevrolet Tahoe 4WD Actuator

The 4WD Actuator on cars particularly the Chevrolet Tahoe is an important component that allows the selection of 4WD with ease. With the help of locking the differential the 4WD Actuator allows achieving maximum gripping ad steady performance in any kind of weather or road conditions. This allow for a simple toggling on of the 4WD mode from a switch or button to give the Tahoe an improved handling on rough ground. The Chevrolet company has applied various kinds of 4WD Actuators in Tahoe models in the course of its production; the mechanisms and functions of the 4WD Actuators are also varied. These variations are to meet the changing needs of drivers, they give better control and flexibility during various driving activities.

Each OEM Chevrolet Tahoe 4WD Actuator we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Tahoe 4WD Actuator Parts Questions & Experts Answers

Actuator,Front Drive Axle
26060073
Q: How do you replace the shift motor from the axle tube on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove the 4WD actuator from the axle tube, first raise the front of the vehicle and support it securely on jackstands. If equipped, remove the differential carrier splash shield. Then, disconnect the electrical connector from the 4WD actuator and unscrew the actuator from the axle tube. Before installing the actuator, coat the threads with RTV sealant and tighten it securely.
Actuator,Front Drive Axle
26060073
Q: How to remove and install an electric shift motor/actuator assembly from Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL's transfer case?
A: To remove the electric shift motor/4WD actuator assembly from a vehicle's Transfer Case, first raise the vehicle and place it securely on jackstands. Then, remove the stone shields from below the transfer case and unplug the shift motor electrical connector. Unscrew the retaining bolts and remove the assembly. To install, inspect the seal for damage and replace if necessary. Position the gasket and 4WD actuator in place on the transfer case and install the bolts, tightening them to the specified torque. Finally, reverse the removal steps.