How to remove the Pushrod and Rocker Arm on V8 engine for Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

Removing of valve covers from the cylinder heads is to be done by first of all removing one at a time each Rocker Arm Pivot Bolt and taking out the rocker arms, bolts and pivot support pedestal. Keep track of their positions and store them separately. Proceed by removing the pushrods, keeping them in sequence as they are. Each rocker arm has to be checked for wear, cracks, damage as well as binding and roughness of the pivot bearings during inspection. The rocker arm has to be replaced if its bearings are worn or damaged. Also examine the rocker arm pivot support pedestal for any cracks. Make sure that all the pushrods are open at the hole on each of their rocker arms' ends and check them for fractures, large amounts of wear or obstruction in oil holes. After lubricating them with clean engine oil or assembly lube, put back the push rods exactly where they came from. In order to protect the stems of valve along with pushrod ends from damage apply some engine assembly lube on them. For every rocker arm shaft as well as bearing make sure you apply clean engine oil then install loosely into original locations (where they were removed). Rotate crankshaft to TDC on compression stroke for number 1 piston then tighten intake valve rocker arms for specific cylinders. Rotate crankshaft 360 degrees then tighten intake valve rocker arms on other cylinders. At last put on valve covers start engine and listen for unusual noise coming from valve train and to check for oil leaks.

How do you remove the Pushrod and Rocker Arm on 4.3L V6 engine for Chevrolet Avalanche,Silverado,Suburban,Tahoe and GMC Sierra,Yukon,Yukon Denali,Yukon XL?

You can start by removing the rocker arms, which will be loosened and stored in containers labeled as rocker arm support bars. Keep their different pushrods separately. If necessary, inspect each rocker arm for damage on the pivoting area and cracks or wear on the bearing surface; after that replace any defective ones, making sure roller bearings rotate freely. Look at the pushrods to see if they have cracks, are too worn out or bent. For reinstalling, lube the push rods and put them back into their original position with full seating in the lifter being noted. After that, place back the rocker arm support with arrows up and also wipe off grease from valve stems and ends of pushrods. Then fit all rocker arms one by one, lubricating roller bearings lightly and tightening the rocker arm bolts evenly according to a specified torque. Lastly, you can start your engine up and check it for oil leaks or noises from the valve train mechanism.

Genuine Chevrolet Silverado Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Rocker Arms found

View related parts
Chevrolet Silverado Arm Assembly, Exhaust Valve Rocker
Part Number: 12681275
$13.36 MSRP: $22.11
You Save: $8.75 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Exh Vlv Rkr; Rocker Arms
- Replaces: 10214664, 12669993
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2019 Chevrolet Silverado | 1500 CREW CAB LONG BOX, 1500 CREW CAB STANDARD BOX, 1500 EXTENDED CAB LONG BOX, 1500 EXTENDED CAB SHORT BOX, 1500 EXTENDED CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX, 2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REG (CAB ONLY), 2500 REGULAR CAB, 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 CREW CAB LONG BOX, 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 DOUBLE CAB LONG BOX, 3500 EXTENDED CAB, 3500 REGULAR (CAB ONLY), 3500 REGULAR CAB, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 CREW CAB STANDARD BOX, CLASSIC 1500 EXTENDED CAB LONG BOX, CLASSIC 1500 EXTENDED CAB SHORT BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX, CLASSIC 1500 REGULAR CAB LONG BOX, CLASSIC 1500 REGULAR CAB STANDARD BOX, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 1/2 TON, CREW CAB 2500 LONG BOX, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 3/4 TON, DOUBLE CAB 2500 LONG BOX, DOUBLE CAB 2500 STANDARD BOX, EXTENDED CAB 1 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 1/2 TON, EXTENDED CAB 8' BOX 3/4 TON, EXTENDED CAB CHASSIS 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 8 Cyl 4.8L, 8 Cyl 4.8L Flex, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L Flex
View related parts
Chevrolet Silverado Arm Assembly, Valve Rocker
Part Number: 12619829
$14.56 MSRP: $24.10
You Save: $9.54 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: ARM, Engine Valve Rocker; Rocker Arms
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2021 Chevrolet Silverado | 1 TON CREW CAB 6'6" BOX 1 TON, 1500 CREW CAB, 1500 CREW CAB STANDARD BOX, 1500 DOUBLE CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX, CREW 5'8" BOX 1/2 TON, CREW 5'8" BOX 1/2 TON(VIN REQ'D), CREW CAB 1 TON CHASSIS 137.0, CREW CAB 1/2 TON, CREW CAB 5'8" BOX 1/2 TON, CREW CAB 6'6" BOX 1 TON 119.0, CREW CAB 6'6" BOX 1/2 TON, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 1 TON, CREW CAB 8' BOX 3/4 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 1 TON, EXTENDED CAB 8' BOX 1/2 TON, EXTENDED CAB 8' BOX 3/4 TON, EXTENDED CREW CAB 1 TON CHASSIS 161.5, REGULAR CAB 1 TON CHASSIS 137.0, REGULAR CAB 1 TON CHASSIS 161.5, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1 TON, REGULAR CAB 8' BOX 1/2 TON, REGULAR CAB 8' BOX 3/4 TON | 6 Cyl 4.3L, 8 Cyl 5.3L, 8 Cyl 6.2L, 8 Cyl 6.6L, 8 Cyl5.3L
View related parts
Chevrolet Silverado Arm Kit,Valve Rocker
Part Number: 10089648
$24.61 MSRP: $40.76
You Save: $16.15 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: ARM KIT, Engine Valve Rocker; Rocker Arms
- Replaces: 12528897
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2007 Chevrolet Silverado | 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 137.0
View related parts
Chevrolet Silverado Arm Assembly, Int Vlv Rkr
Part Number: 12696105
$12.62 MSRP: $20.89
You Save: $8.27 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rocker Arms
- Replaces: 12669995, 12569167
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2019 Chevrolet Silverado | 2500 CREW CAB STANDARD BOX, 2500 REG (CAB ONLY), 2500 REGULAR CAB, 3500 CREW CAB LONG BOX, 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 DOUBLE CAB LONG BOX, 3500 REGULAR (CAB ONLY), 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 1/2 TON, CREW CAB 2500 LONG BOX, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 3/4 TON, DOUBLE CAB 2500 LONG BOX, DOUBLE CAB 2500 STANDARD BOX, EXTENDED CAB 1 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 1/2 TON, EXTENDED CAB 8' BOX 3/4 TON, EXTENDED CAB CHASSIS 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L Flex
View related parts
Chevrolet Silverado Arm,Valve Rocker
Part Number: 12556298
$24.68 MSRP: $40.85
You Save: $16.17 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: ARM, Engine Valve Rocker; Rocker Arms
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chevrolet Silverado | 2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB | 8 Cyl 8.1L
View related parts
Chevrolet Silverado Arm,Valve Rocker
Part Number: 12599650
$53.21 MSRP: $83.72
You Save: $30.51 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: ARM, Engine Valve Rocker; Rocker Arms
- Replaces: 12555580
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 Chevrolet Silverado | 1500 EXTENDED CAB LONG BOX, 1500 EXTENDED CAB SHORT BOX, 1500 EXTENDED CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX, CLASSIC 1500 EXTENDED CAB LONG BOX, CLASSIC 1500 EXTENDED CAB SHORT BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX, CLASSIC 1500 REGULAR CAB LONG BOX, CLASSIC 1500 REGULAR CAB STANDARD BOX, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON | 6 Cyl 4.3L
View related parts
Chevrolet Silverado Arm Assembly, Valve Rocker (Exhaust)
Part Number: 98004537
$110.60 MSRP: $174.02
You Save: $63.42 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: ARM, Engine Valve Rocker; Rocker Arms
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2016 Chevrolet Silverado | 2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 CREW CAB LONG BOX, 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 DOUBLE CAB LONG BOX, 3500 EXTENDED CAB, 3500 REGULAR CAB, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 2500 LONG BOX, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 3/4 TON, DOUBLE CAB 2500 LONG BOX, DOUBLE CAB 2500 STANDARD BOX, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, EXTENDED CAB CHASSIS 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 8 Cyl 6.6L Diesel
View related parts
Chevrolet Silverado Arm Assembly, Valve Rocker (Intake)
Part Number: 97365293
$80.63 MSRP: $162.59
You Save: $81.96 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: ARM, Engine Valve Rocker; Rocker Arms
- Replaces: 97224896, 97316780
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2016 Chevrolet Silverado | 2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 CREW CAB LONG BOX, 3500 CREW CAB ONLY, 3500 CREW CAB STANDARD BOX, 3500 DOUBLE CAB LONG BOX, 3500 EXTENDED CAB, 3500 REGULAR CAB, CLASSIC 2500 CREW CAB LONG BOX, CLASSIC 2500 CREW CAB STANDARD BOX, CLASSIC 2500 EXTENDED CAB LONG BOX, CLASSIC 2500 EXTENDED CAB STANDARD BOX, CLASSIC 2500 REGULAR CAB, CLASSIC 3500 CHASSIS EXTENDED CAB 161.5, CLASSIC 3500 CHASSIS REGULAR CAB 137.0, CLASSIC 3500 CHASSIS REGULAR CAB 161.5, CLASSIC 3500 CREW CAB, CLASSIC 3500 EXTENDED CAB, CLASSIC 3500 REGULAR CAB, CREW CAB 1 TON, CREW CAB 2500 LONG BOX, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 3/4 TON, DOUBLE CAB 2500 LONG BOX, DOUBLE CAB 2500 STANDARD BOX, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, EXTENDED CAB CHASSIS 1 TON 161.5, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, REGULAR CAB CHASSIS 1 TON 137.0, REGULAR CAB CHASSIS 1 TON 161.5 | 8 Cyl 6.6L Diesel
View related parts
Chevrolet Silverado Arm Assembly, Vlv Rkr
Part Number: 12701225
$2.75 MSRP: $4.34
You Save: $1.59 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rocker Arms
- Replaces: 12663276
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2021 Chevrolet Silverado | CREW 5'8" BOX 1/2 TON, CREW 5'8" BOX 1/2 TON(VIN REQ'D), CREW CAB 5'8" BOX 1/2 TON, CREW CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON | 4 Cyl 2.7L
View related parts
Chevrolet Silverado Arm,Valve Rocker (Exhaust)
Part Number: 97328661
$111.81 MSRP: $176.72
You Save: $64.91 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: ARM, Engine Valve Rocker; Rocker Arms
- Replaces: 97224897
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chevrolet Silverado | 2500 CREW CAB LONG BOX, 2500 CREW CAB STANDARD BOX, 2500 EXTENDED CAB LONG BOX, 2500 EXTENDED CAB STANDARD BOX, 2500 REGULAR CAB, 3500 CHASSIS EXTENDED CAB 161.5, 3500 CHASSIS REGULAR CAB 137.0, 3500 CHASSIS REGULAR CAB 161.5, 3500 CREW CAB, 3500 EXTENDED CAB, 3500 REGULAR CAB | 8 Cyl 6.6L Diesel
View related parts
Chevrolet Silverado Arm Assembly, Vlv Rkr
Part Number: 55506814
$1.91 MSRP: $3.00
You Save: $1.09 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rocker Arms
- Replaced by: 55515640
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020 Chevrolet Silverado | CREW 5'8" BOX 1/2 TON, CREW CAB 5'8" BOX 1/2 TON, CREW CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON | 6 Cyl 3.0L Diesel
View related parts
Chevrolet Silverado ARM ASM-VLV RKR
Part Number: 55515640
$1.91 MSRP: $3.00
You Save: $1.09 (37%)
Product Specifications
- Other Name: Rocker Arms
- Replaces: 55506814
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2021 Chevrolet Silverado | CREW 5'8" BOX 1/2 TON, CREW CAB 5'8" BOX 1/2 TON, CREW CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON | 6 Cyl 3.0L Diesel
View related parts
Chevrolet Silverado Arm Kit,Valve Rocker
Part Number: 12522105
Product Specifications
- Other Name: ARM KIT, Engine Valve Rocker; Rocker Arms
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999 Chevrolet Silverado | 1500 EXTENDED CAB LONG BOX, 1500 EXTENDED CAB STANDARD BOX, 1500 REGULAR CAB LONG BOX, 1500 REGULAR CAB STANDARD BOX | 6 Cyl 4.3L

Chevrolet Silverado Rocker Arm Parts Questions & Experts Answers

Arm Assembly, Exhaust Valve Rocker
12681275
Q: How to remove the Pushrod and Rocker Arm on V8 engine for Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: Removing of valve covers from the Cylinder Heads is to be done by first of all removing one at a time each Rocker Arm Pivot Bolt and taking out the rocker arms, bolts and pivot support pedestal. Keep track of their positions and store them separately. Proceed by removing the pushrods, keeping them in sequence as they are. Each rocker arm has to be checked for wear, cracks, damage as well as binding and roughness of the pivot bearings during inspection. The rocker arm has to be replaced if its bearings are worn or damaged. Also examine the rocker arm pivot support pedestal for any cracks. Make sure that all the pushrods are open at the hole on each of their rocker arms' ends and check them for fractures, large amounts of wear or obstruction in oil holes. After lubricating them with clean engine oil or assembly lube, put back the push rods exactly where they came from. In order to protect the stems of valve along with pushrod ends from damage apply some engine assembly lube on them. For every rocker arm shaft as well as bearing make sure you apply clean engine oil then install loosely into original locations (where they were removed). Rotate crankshaft to TDC on compression stroke for number 1 piston then tighten intake valve rocker arms for specific cylinders. Rotate crankshaft 360 degrees then tighten intake valve rocker arms on other cylinders. At last put on valve covers start engine and listen for unusual noise coming from valve train and to check for oil leaks.
Arm Assembly, Exhaust Valve Rocker
12681275
Q: How do you remove the Pushrod and Rocker Arm on 4.3L V6 engine for Chevrolet Avalanche,Silverado,Suburban,Tahoe and GMC Sierra,Yukon,Yukon Denali,Yukon XL?
A: You can start by removing the Rocker Arms, which will be loosened and stored in containers labeled as rocker arm support bars. Keep their different pushrods separately. If necessary, inspect each rocker arm for damage on the pivoting area and cracks or wear on the bearing surface; after that replace any defective ones, making sure roller bearings rotate freely. Look at the pushrods to see if they have cracks, are too worn out or bent. For reinstalling, lube the push rods and put them back into their original position with full seating in the lifter being noted. After that, place back the rocker arm support with arrows up and also wipe off grease from valve stems and ends of pushrods. Then fit all rocker arms one by one, lubricating roller bearings lightly and tightening the rocker arm bolts evenly according to a specified torque. Lastly, you can start your engine up and check it for oil leaks or noises from the valve train mechanism.