Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2019-2021 Chevrolet Silverado | 1 TON CREW CAB 6'6" BOX 1 TON, CREW 5'8" BOX 1/2 TON, CREW 5'8" BOX 1/2 TON(VIN REQ'D), CREW CAB 1 TON CHASSIS 137.0, CREW CAB 5'8" BOX 1/2 TON, CREW CAB 6'6" BOX 1 TON 119.0, CREW CAB 6'6" BOX 1/2 TON, CREW CAB 6'6" BOX 3/4 TON, CREW CAB 8' BOX 1 TON, CREW CAB 8' BOX 3/4 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 1 TON, EXTENDED CAB 8' BOX 1/2 TON, EXTENDED CAB 8' BOX 3/4 TON, EXTENDED CREW CAB 1 TON CHASSIS 161.5 | 4 Cyl 2.7L, 6 Cyl 3.0L Diesel, 6 Cyl 4.3L, 8 Cyl 5.3L, 8 Cyl 6.2L, 8 Cyl 6.6L, 8 Cyl 6.6L Diesel, 8 Cyl5.3L
| Page 1 of 4 |Next >
1-20 of 78 Results
Chevrolet Silverado Door Latch Assembly
Each OEM Chevrolet Silverado Door Latch Assembly we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Silverado Door Latch Assembly Parts Questions & Experts Answers
Q: How to remove and install Door Handle, Door Latch Assembly,Door Lock Cylinder on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove and install various components of a vehicle's door, such as the latch, lock cylinder, outside handle, inside release handle, and latch strikers, certain steps must be followed. For standard doors, the latch rods must be detached from the lock cylinder, inside lock, and outside handle before removing the three Torx-head mounting screws and the latch from the door. Access doors use two latches, one at the top and one at the bottom, and require the removal of the trim around the latch to access it for removal or adjustment. The lock cylinder can be removed by prying off the retaining clip and withdrawing it from the door handle, while the outside handle requires the removal of the hole plug and bolts before detaching the rods for the lock cylinder and handle itself. The inside release handle must have its cable released and mounting fasteners removed, and latch strikers can be adjusted by loosening the bolts and moving the striker slightly before retightening and checking for proper latch operation.