How do you remove the power steering pump?

To remove the power steering pump, start by disconnecting the cable from the negative terminal of the battery. Then, remove the upper fan shroud and the serpentine drive belt. Use a special power steering pump pulley remover to remove the pulley from the pump. Place a drain pan under the pump and disconnect the pressure and return hoses, plugging them to prevent contaminants from entering. Remove the pump mounting fasteners and lift the pump from the vehicle, being careful not to spill fluid on painted surfaces. To install the new pump, position it in the mounting bracket and secure it with bolts and nuts. Connect the hoses and tighten the fittings securely. Use a special pulley installer tool or a fabricated alternative tool to press the pulley onto the shaft. Install the drive belt and fill the power steering reservoir with the recommended fluid. Finally, bleed the system to ensure proper functioning.

Genuine Chevrolet S10 Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Power Steering Pumps found

View related parts
Chevrolet S10 Pump Kit,P/S
Part Number: 26043373
Product Specifications
- Other Name: PUMP KIT, Power Steering; Power Steering Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2003 Chevrolet S10 | PICKUP | 4 Cyl 2.2L, 4 Cyl 2.2L Flex
View related parts
Chevrolet S10 PUMP KIT,P/S
Part Number: 19369072
$258.15 MSRP: $464.38
You Save: $206.23 (45%)
Product Specifications
- Other Name: Housing, Power Steering Pump
- Replaces: 26086107, 26043369
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet S10 | PICKUP | 4 Cyl 2.2L
View related parts
Chevrolet S10 Pump,P/S(Remanufacture)
Part Number: 88990484
Product Specifications
- Other Name: PUMP KIT, Power Steering
- Replaces: 26060571, 26061611, 26028560, 26060551, 26028575, 26028566, 26029360, 26028563, 26028564, 26028574, 26060567, 26060579
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1990 Chevrolet S10 | 2 DOOR, PICKUP | 4 Cyl 1.9L, 4 Cyl 2.0L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Pump Asm,P/S (Remanufacture)
Part Number: 88985398
Product Specifications
- Other Name: PUMP KIT, Power Steering
- Replaces: 26029395
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1990 Chevrolet S10 | 2 DOOR, PICKUP | 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Pump Asm,P/S (Remanufacture)
Part Number: 88985084
Product Specifications
- Other Name: PUMP KIT, Power Steering; Power Steering Pump
- Replaces: 26028590, 26032208
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1986 Chevrolet S10 | 2 DOOR, PICKUP | 4 Cyl 1.9L, 4 Cyl 2.0L, 6 Cyl 2.8L
View related parts
Chevrolet S10 Pump Asm,P/S (Remanufacture)
Part Number: 88985262
Product Specifications
- Other Name: PUMP KIT, Power Steering; Power Steering Pump
- Replaces: 26070250, 26070243, 26061613
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Chevrolet S10 | 2 DOOR, PICKUP | 4 Cyl 1.9L, 4 Cyl 2.0L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Pump Asm,P/S (Remanufacture)
Part Number: 88990427
Product Specifications
- Other Name: PUMP KIT, Power Steering
- Replaces: 26028628, 26085072
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet S10 | 2 DOOR, PICKUP | 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Pump,P/S
Part Number: 88963508
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Replaces: 15066473, 15135010
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet S10 | CREW CAB, PICKUP, PICKUP EXTENDED CAB | 6 Cyl 4.3L
View related parts
Chevrolet S10 Pump Asm/P/S
Part Number: 26048280
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Replaces: 07843045, 7843045
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1993 Chevrolet S10 | 2 DOOR, PICKUP | 4 Cyl 2.5L
- 1984-1985 Chevrolet S10 | 2 DOOR, PICKUP | 4 Cyl 2.2L Diesel
View related parts
Chevrolet S10 Pump Assembly, P/S
Part Number: 26002177
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Chevrolet S10 | PICKUP | 6 Cyl 2.8L
View related parts
Chevrolet S10 Pump,P/S
Part Number: 26004786
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1994 Chevrolet S10 | 2 DOOR, 4 DOOR, PICKUP | 6 Cyl 4.3L
View related parts
Chevrolet S10 Pump Assembly, P/S
Part Number: 26047463
Product Specifications
- Other Name: PUMP, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet S10 | PICKUP | 6 Cyl 4.3L
View related parts
Chevrolet S10 Pump,P/S
Part Number: 26047355
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Replaces: 26036337
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet S10 | PICKUP | 6 Cyl 4.3L
View related parts
Chevrolet S10 Pump Assembly, P/S
Part Number: 26023879
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet S10 | PICKUP | 4 Cyl 2.2L
View related parts
Chevrolet S10 Pump Assembly, P/S (W/ Motor)
Part Number: 26058290
Product Specifications
- Other Name: PUMP, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Chevrolet S10 | ELECTRIC

Chevrolet S10 Power Steering Pump

The Power Steering Pump for the Chevrolet S10 automobiles is one of the most vital mechanisms of the power steering system that contributes to transforming the engine energy into hydraulic energy that aids the driver to turn the automobiles steering wheel. Through providing hydraulic power in the steering, the pump relieves the amount of force required to operate the steering especially during slow motion or staking of the car. The pump is usually connected to the engine belt and is hydraulically connected to the steering mechanism with high Pressure hydraulic pipes. Some of the familiar problems related to the power steering pump encompass leakage of the pump, squealing, buzzing, or whining noise, reduced or complete absence of power assistance, and sensitivity complications. Producers have been redesigning power steering systems, with the ability to supply more or less power according to the kind of car and the driving circumstance, while other circuits being electronic. On a final note, this paper has been able to clearly establish that the Power Steering Pump is a critical component in achieving improved ease to steer Chevrolet S10 cars.

Each OEM Chevrolet S10 Power Steering Pump we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet S10 Power Steering Pump Parts Questions & Experts Answers

Pump Assembly, P/S
26047463
Q: How do you remove the power steering pump?
A: To remove the power steering pump, start by disconnecting the cable from the negative terminal of the battery. Then, remove the upper fan shroud and the serpentine drive belt. Use a special power steering pump pulley remover to remove the pulley from the pump. Place a drain pan under the pump and disconnect the pressure and return hoses, plugging them to prevent contaminants from entering. Remove the pump mounting fasteners and lift the pump from the vehicle, being careful not to spill fluid on painted surfaces. To install the new pump, position it in the mounting bracket and secure it with bolts and nuts. Connect the hoses and tighten the fittings securely. Use a special pulley installer tool or a fabricated alternative tool to press the pulley onto the shaft. Install the drive belt and fill the power steering reservoir with the recommended fluid. Finally, bleed the system to ensure proper functioning.