My Garage
My Account
Cart
Genuine Chevrolet S10 Idler Arm
Steering Idler Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Idler Arms found
Chevrolet S10 Idler Arm
In case of Chevrolet S10, Idler Arm is an integral equipment of steering assembly that joins the center link appended to the framework of the car. It is crucial in providing assistance on the passenger side and complementing the Pitman arm in as far as the alignment of the steering column is concerned. Because the idler arm plays such a crucial role, it therefore wears out much quicker, and must be greased using a grease gun, during an oil change. Maintenance of the idler arm beyond ensuring good stability in the steering system of the Chevrolet S10 vehicles also helps to prolong the durability of the steering linkage system.
Each OEM Chevrolet S10 Idler Arm we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet S10 Idler Arm Parts Questions & Experts Answers
- Q: How to inspect the Center Link,Idler Arm,Pitman Arm and Tie Rod on Chevrolet S10?A: The inspection process for the steering linkage involves checking the various components that connect the steering gear to the front wheels. This includes the Pitman arm, idler arm, relay rod, tie-rods, and steering damper. The wheels should be set in the straight-ahead position and the steering wheel locked before raising one side of the vehicle. A dial indicator is used to measure any play in the steering system, which should be less than 0.108 inches. The idler arm should also be checked for excessive play, with a measurement greater than 1/4-inch indicating the need for replacement. Additionally, torn ball stud boots, frozen joints, and bent or damaged linkage components should be inspected. The removal and installation process for the tie-rod involves loosening the wheel lug nuts, raising the vehicle, and removing the wheel. The cotter pin is then removed and the castellated nut loosened. Depending on whether the outer or inner tie-rod end or the entire tie-rod is being replaced, the appropriate steps are followed. Lubrication and adjustment of the tie-rod end is necessary before reinstallation. The idler arm can be removed by loosening the nut and using a two-jaw puller to separate it from the relay rod. The idler arm-to-frame bolts are then removed. Installation involves positioning the idler arm on the frame, tightening the bolts, and inserting the ball stud into the relay rod. The relay rod can be removed by separating the inner tie-rod ends and disconnecting it from the Pitman arm and idler arm. Installation is the reverse of removal. The Pitman arm is removed by separating it from the relay rod using a puller, removing the steering gear, and then removing the Pitman arm nut and washer. The Pitman arm is then removed with a puller. The steering damper can be inspected for fluid leakage, wear on the bushing, and tested for smooth resistance. Removal involves disconnecting it from the relay rod and removing the mounting bolt and nut. Installation is the reverse of removal.
Related Chevrolet S10 Parts
Browse by Year
2004 Idler Arm 2003 Idler Arm 2002 Idler Arm 2001 Idler Arm 2000 Idler Arm 1999 Idler Arm 1998 Idler Arm 1997 Idler Arm 1996 Idler Arm 1995 Idler Arm 1994 Idler Arm 1993 Idler Arm 1992 Idler Arm 1991 Idler Arm 1990 Idler Arm 1989 Idler Arm 1988 Idler Arm 1987 Idler Arm 1986 Idler Arm 1985 Idler Arm 1984 Idler Arm 1983 Idler Arm 1982 Idler Arm