How do you remove the inside handle, outside handle and lock cylinder, and latch from a door on Chevrolet S10?

For the beginning, in case it equipped with power components model, you need to remove the inside handle disconnecting cable from negative battery terminal. After that, take off the door trim panel and water shield along with window glass in full up position. Remove lock rod and drill out rivets securing the handle to the door frame. Finally, remove the handle itself. The reinstallation is as simple as reversing of what has been done during removal. To remove an outside handle or lock cylinder start by first removing a door trim panel and water shield. Then disengage handle and lock cylinder from lock rods and remove handle-to-door nuts. Now pull out handle free from below lock cylinder off it completely. Installation is simple-just reverse removal steps above. To remove latch assembly at first disconnect locking knob rod, then inside handle rod, plus finally inside handle lock rod all from latch assembly located on inside of door panel; thus the next thing- is removing retaining screws of such latch assembly so as to pull this assembly out unhamperedly away from door completely. Reinstalling is easy too; it's just a matter of reversing order of disassembling through which they were removed initially during uninstallation process nut+rod.

Genuine Chevrolet S10 Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Door Lock Cylinders found

View related parts
Chevrolet S10 Front Side Door Lock Cylinder
Part Number: 12398552
$27.79 MSRP: $43.71
You Save: $15.92 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder,Front Side Door Lock
- Position: Front
- Replaces: 00714357, 714357
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1990 Chevrolet S10 | 2 DOOR, PICKUP | 4 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Cylinder,Front Side Door Lock
Part Number: 12547541
$45.03 MSRP: $67.33
You Save: $22.30 (34%)
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Door Lock Cylinder; Cylinder & Key, Lock Cylinder
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet S10 | ELECTRIC, PICKUP | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
Chevrolet S10 Cylinder Kit,Front Side Door Lock (Uncoded)
Part Number: 15799771
$115.81 MSRP: $173.92
You Save: $58.11 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Door Lock Cylinder
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet S10 | CREW CAB, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
Chevrolet S10 Cylinder,Instrument Panel Compartment Door Lock (Uncoded)
Part Number: 12507453
$13.05 MSRP: $19.23
You Save: $6.18 (33%)
ADD TO CART
Product Specifications
- Other Name: CYLINDER; Lock, Lock Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 Chevrolet S10 | 2 DOOR, 4 DOOR, PICKUP | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
- 1982-1985 Chevrolet S10 | 2 DOOR, PICKUP | 4 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L
View related parts
Chevrolet S10 Front Side Door Lock Cylinder Assembly (Uncoded Black)
Part Number: 15578974
$25.22 MSRP: $36.24
You Save: $11.02 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Front Side Door Lock (Uncoded Black) ; Cylinder, Door Lock Cylinder; Cylinder & Key, Lock Cylinder
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1994 Chevrolet S10 | 2 DOOR, 4 DOOR, PICKUP | 4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Front Side Door Lock Cylinder Package (Uncoded)
Part Number: 12502669
$5.13 MSRP: $8.07
You Save: $2.94 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Pkg, Front Side Door Lock (Uncoded)
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 Chevrolet S10 | 2 DOOR, 4 DOOR, PICKUP | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Cylinder, Instrument Panel Compartment Door Lock (Uncoded)
Part Number: 12506503
Product Specifications
- Other Name: CYLINDER; Cylinder & Key, Lock Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Chevrolet S10 | 2 DOOR, 4 DOOR, PICKUP | 4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Cylinder Kit,End Gate Lock(Uncoded)
Part Number: 12498270
Product Specifications
- Other Name: CYLINDER KIT, End Gate Lock; Cylinder & Key, Lock Cylinder
- Replaces: 15664890
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1983-1994 Chevrolet S10 | 2 DOOR, 4 DOOR | 4 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Cylinder Kit,Front Side Door Lock (Uncoded)
Part Number: 12545711
Product Specifications
- Other Name: CYLINDER, Door Lock Cylinder; Lock Cylinder
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet S10 | PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Cylinder Kit,End Gate Lock (Uncoded)
Part Number: 12507441
Product Specifications
- Other Name: CYLINDER, End Gate Lock; Cylinder, Lock Cylinder
- Replaces: 09632765, 9632765
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1983-1990 Chevrolet S10 | 2 DOOR | 4 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L

Chevrolet S10 Door Lock Cylinder

Chevrolet S10 Door Lock Cylinder is a component situated on the front doors that opens and closes the Door when an appropriate key is inserted into the key slot. Although, the newer models of cars being produced do not have these door lock cylinders, they are still prevalent in most cars on the road. In the long run, these cylinders seal up, which implies that one will struggle to lock or unlock the doors, not to mention that they key may get stuck. Due to the sensitivity of the door lock cylinder in allowing easy and secure entry into a car, the lock should be replaced as soon as there is a sign of it being faulty.

Each OEM Chevrolet S10 Door Lock Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet S10 Door Lock Cylinder Parts Questions & Experts Answers

Cylinder,Front Side Door Lock
12547541
Q: How do you remove the inside handle, outside handle and lock cylinder, and latch from a door on Chevrolet S10?
A: For the beginning, in case it equipped with power components model, you need to remove the inside handle disconnecting cable from negative battery terminal. After that, take off the door trim panel and water shield along with window glass in full up position. Remove lock rod and drill out rivets securing the handle to the door frame. Finally, remove the handle itself. The reinstallation is as simple as reversing of what has been done during removal. To remove an outside handle or lock cylinder start by first removing a door trim panel and water shield. Then disengage handle and lock cylinder from lock rods and remove handle-to-door nuts. Now pull out handle free from below lock cylinder off it completely. Installation is simple-just reverse removal steps above. To remove latch assembly at first disconnect locking knob rod, then inside handle rod, plus finally inside handle lock rod all from latch assembly located on inside of door panel; thus the next thing- is removing retaining screws of such latch assembly so as to pull this assembly out unhamperedly away from door completely. Reinstalling is easy too; it's just a matter of reversing order of disassembling through which they were removed initially during uninstallation process nut+rod.