How do you remove the inside handle, outside handle and lock cylinder, and latch from a door?

For the beginning, in case it equipped with power components model, you need to remove the inside handle disconnecting cable from negative battery terminal. After that, take off the door trim panel and water shield along with window glass in full up position. Remove lock rod and drill out rivets securing the handle to the door frame. Finally, remove the handle itself. The reinstallation is as simple as reversing of what has been done during removal. To remove an outside handle or lock cylinder start by first removing a door trim panel and water shield. Then disengage handle and lock cylinder from lock rods and remove handle-to-door nuts. Now pull out handle free from below lock cylinder off it completely. Installation is simple−just reverse removal steps above. To remove latch assembly at first disconnect locking knob rod, then inside handle rod, plus finally inside handle lock rod all from latch assembly located on inside of door panel; thus the next thing- is removing retaining screws of such latch assembly so as to pull this assembly out unhamperedly away from door completely. Reinstalling is easy too; it's just a matter of reversing order of disassembling through which they were removed initially during uninstallation process nut+rod.

Genuine Chevrolet S10 Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

42 Door Handles found

View related parts
Chevrolet S10 Handle Asm,Rear Side Door Inside
Part Number: 19211052
$53.40 MSRP: $79.83
You Save: $26.43 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Door Lock Remote Control Inside; Door Handle
- Position: Rear
- Replaces: 15760310, 15007489, 25988075, 15985544
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2003 Chevrolet S10 | PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle Assembly, Side Front Door Outside, Left
Part Number: 20111713
$63.23 MSRP: $90.87
You Save: $27.64 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Door Outside; Handle, Outside Handle
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1990 Chevrolet S10 | 2 DOOR, PICKUP | 4 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle,Pick Up Box End Gate Latch
Part Number: 15007218
$82.84 MSRP: $104.22
You Save: $21.38 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, End Gate Lock; Handle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chevrolet S10 | CREW CAB, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle,Front Side Door Outside
Part Number: 15202912
$57.19 MSRP: $85.50
You Save: $28.31 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Door Outside Handle; Outside Handle
- Position: Front
- Replaces: 15647662, 15757215, 15007214, 15058576
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2004 Chevrolet S10 | CREW CAB, ELECTRIC, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle,Front Side Door Inside
Part Number: 15997813
$9.02 MSRP: $23.87
You Save: $14.85 (63%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Door Lock Remote Control Inside; Inside Handle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet S10 | CREW CAB, PICKUP | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
- 1994-1997 Chevrolet S10 | ELECTRIC, PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle,Front Side Door Outside
Part Number: 15969377
$28.86 MSRP: $33.62
You Save: $4.76 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Door Outside; Handle, Outside Handle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1994 Chevrolet S10 | 2 DOOR, 4 DOOR, PICKUP | 4 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle Assembly, Asst *Medium Gray
Part Number: 15686615
$13.05 MSRP: $24.82
You Save: $11.77 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Door Inside Assist Handle; Assist Strap
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chevrolet S10 | ELECTRIC, PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
View related parts
Chevrolet S10 HANDLE, Door Inside Assist Handle
Part Number: 15734510
$13.05 MSRP: $18.75
You Save: $5.70 (31%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet S10 | ELECTRIC, PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle,Front Side Door Outside
Part Number: 15202911
$58.73 MSRP: $87.80
You Save: $29.07 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Door Outside Handle; Outside Handle
- Position: Front
- Replaces: 15007213, 15647661, 15757214, 15058575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2004 Chevrolet S10 | CREW CAB, ELECTRIC, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle Assembly, Rear Side Door Outside
Part Number: 15202914
$21.79 MSRP: $25.41
You Save: $3.62 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Door Outside Handle; Outside Handle
- Position: Rear
- Replaces: 15007216, 15757231
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet S10 | CREW CAB, PICKUP | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle Assembly, Asst *Pewter
Part Number: 15953491
$16.86 MSRP: $18.11
You Save: $1.25 (7%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Door Inside Assist Handle; Assist Strap
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1998 Chevrolet S10 | PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle Assembly, Asst *Pewter R
Part Number: 10376786
$20.74 MSRP: $22.62
You Save: $1.88 (9%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Door Inside Assist Handle; Assist Strap
- Replaces: 15011454
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet S10 | ELECTRIC, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle Assembly, Asst <Use 1C4J*Beige
Part Number: 15011455
$33.67
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Door Inside Assist Handle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet S10 | PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle Assembly, Asst *Graphite
Part Number: 10376785
Product Specifications
- Other Name: HANDLE, Door Inside Assist Handle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet S10 | CREW CAB, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
Chevrolet S10 HANDLE, Door Inside Assist Handle
Part Number: 14067213
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1983-1989 Chevrolet S10 | 2 DOOR, PICKUP | 4 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L
View related parts
Chevrolet S10 HANDLE
Part Number: 15708921
Product Specifications
- Other Name: HANDLE, Assist Handle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet S10 | CREW CAB, PICKUP, PICKUP EXTENDED CAB | 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle Assembly, Asst *Dkblue
Part Number: 15686613
Product Specifications
- Other Name: HANDLE, Door Inside Assist Handle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet S10 | PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle Assembly, Asst <Use 1C4J*Navy Blue
Part Number: 15733525
Product Specifications
- Other Name: HANDLE, Door Inside Assist Handle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chevrolet S10 | PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle,Asst *Graphite
Part Number: 15686612
Product Specifications
- Other Name: HANDLE, Door Inside Assist Handle; Assist Strap, Grip Handle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1998 Chevrolet S10 | PICKUP | 4 Cyl 2.2L, 6 Cyl 4.3L
View related parts
Chevrolet S10 Handle Assembly, Asst *Charcoal
Part Number: 14067211
Product Specifications
- Other Name: HANDLE, Door Inside Assist Handle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1983-1994 Chevrolet S10 | 2 DOOR, 4 DOOR, PICKUP | 4 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L

| Page 1 of 3 |Next >

1-20 of 42 Results

Chevrolet S10 Door Handle

The Door Handle of Chevrolet S10 vehicles also plays some of the general functions of permitting entry into the car by opening the door. Made of plastic or metal, the handle is attached to a metal rod which, upon pulling, sets off the door latch. This gives a sure way of getting into the vehicle to enhance safe operations. The years have seen different types of the Door Handles used in the Chevrolet S10 although the differentiation of the designs is not described. In any case, these handles are created to be long-lasting and to effectively cope with representatives of various weather categories and with intensive usage. In total, the Exterior Door Handle is an essential aspect in the convenience and practicality of the Chevrolet S10.

Each OEM Chevrolet S10 Door Handle we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet S10 Door Handle Parts Questions & Experts Answers

Handle,Front Side Door Outside
15202912
Q: How do you remove the inside handle, outside handle and lock cylinder, and latch from a door?
A: For the beginning, in case it equipped with power components model, you need to remove the inside handle disconnecting cable from negative battery terminal. After that, take off the door trim panel and water shield along with window glass in full up position. Remove lock rod and drill out rivets securing the handle to the door frame. Finally, remove the handle itself. The reinstallation is as simple as reversing of what has been done during removal. To remove an outside handle or lock cylinder start by first removing a door trim panel and water shield. Then disengage handle and lock cylinder from lock rods and remove handle-to-door nuts. Now pull out handle free from below lock cylinder off it completely. Installation is simple−just reverse removal steps above. To remove latch assembly at first disconnect locking knob rod, then inside handle rod, plus finally inside handle lock rod all from latch assembly located on inside of door panel; thus the next thing- is removing retaining screws of such latch assembly so as to pull this assembly out unhamperedly away from door completely. Reinstalling is easy too; it's just a matter of reversing order of disassembling through which they were removed initially during uninstallation process nut+rod.