How do you install and replace Muffler and Tail Pipe on a Chevrolet Nova?

Raise the vehicle and support it securely on jackstands. Loosen the clamp to remove muffler and tailpipe of a single exhaust system. For dual exhausts, cut off or loosen clamp to take out relevant muffler and tailpipe. To install new ones, align the exhaust pipes with the slot in the muffler. Connect tailpipes onto hangers before tightening all clamps and attachments. Check that an area of at least ¾ inch thick is available between floor pan and any exhaust component. In conclusion, lower the vehicle to the ground.

Genuine Chevrolet Nova Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mufflers found

View related parts
Chevrolet Nova Exhaust Muffler (W/Tail Pipe)
Part Number: 94855264
Product Specifications
- Other Name: Muffler,Exhaust(W/Tail Pipe); Muffler & Pipe
- Replaces: 94845266
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988 Chevrolet Nova | 4 DOOR, 4 DOOR NOTCHBACK, TWIN CAMSHAFT 4 DOOR | 4 Cyl 1.6L
View related parts
Chevrolet Nova Exhaust Muffler (W/Tail Pipe)
Part Number: 94843748
Product Specifications
- Other Name: Muffler,Exhaust(W/Tail Pipe); Muffler, Muffler & Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1988 Chevrolet Nova | 4 DOOR, 4 DOOR NOTCHBACK, TWIN CAMSHAFT 4 DOOR | 4 Cyl 1.6L

Chevrolet Nova Muffler Parts Questions & Experts Answers

Exhaust Muffler (W/Tail Pipe)
94855264
Q: How do you install and replace Muffler and Tail Pipe on a Chevrolet Nova?
A: Raise the vehicle and support it securely on jackstands. Loosen the clamp to remove muffler and tailpipe of a single exhaust system. For dual exhausts, cut off or loosen clamp to take out relevant muffler and tailpipe. To install new ones, align the exhaust pipes with the slot in the muffler. Connect tailpipes onto hangers before tightening all clamps and attachments. Check that an area of at least ¾ inch thick is available between floor pan and any exhaust component. In conclusion, lower the vehicle to the ground.