Genuine Chevrolet Nova Intake Valve

Engine Intake Valve
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intake Valve found

  • Chevrolet Nova Intake Valve - 94845132
    View related parts
    Product Specifications
    • Other Name: Valve
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1988 Chevrolet Nova | 4 DOOR, 4 DOOR NOTCHBACK, TWIN CAMSHAFT 4 DOOR | 4 Cyl 1.6L

Chevrolet Nova Intake Valve

Intake valve in the context of Chevrolet Nova automobiles is of great significance in as far as improving the overall performance of the car engine is concerned and the success of combustion. Mainly it works for controlling the amount of time for the entrance of air and fuel mixture that is very important for making the maximum possible power. Intake valves are designed to open and allow the mixture mentioned earlier into the engine chamber and the failure of this valve results in poor combustion and reduced engine power and therefore needs to be replaced as soon as possible so that one is not forced to spend a huge amount of money to have it repaired. In the different years of Chevrolet Nova, there had been Intake Valves employed which has different characteristics to suit a certain performance criteria. The process of repairing or replacing a damaged Intake Valve includes several techniques and requires such instruments as a valve spring compressor and a small magnet to set and solve a problem with the valve properly. Correct installation is pivotal so as to ensure the durability of the engine as well as its efficiency in Chevrolet Nova automobiles.

Each OEM Chevrolet Nova Intake Valve we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Nova Intake Valve Parts Questions & Experts Answers

  • Q: Should servicing valves, valve seats, and valve guides be performed by a professional on Chevrolet Nova?
    A: It is a highly technical procedure, which requires specific tools and equipment and therefore should be done by a professional and it's referred to as a valve job which entails servicing of the valves, seats and guides. For home mechanics, one can pull the heads, make initial dirt and grime washes and inspections and then take the head to a dealership service department or to an automotive machine shop for the real work to be done. Performing the inspection enables identification of the condition of the heads and other valvetrain parts as well as the awareness of work required and available new parts via working with an automotive machine shop. Dealer service department or automotive machine shop will recondition/ replace valves and seat, recondition guides, check / replace valves springs, spring retainer, rotators and keeper if necessary, replace valve seal and reassemble valve parts, check the installed spring height to confirm is correct. Also, if the cylinder head gasket surfaces are counterform, they will be machined to attempt flat. When the valve job is done by a professional the heads will look as good as new as far as the outside appearance is concerned. Before fitting them back on the engine, these parts must also be cleaned once more to get rid of any remaining metal chips and abrasive dust that may well still be stuck there, post valve work or in the event of a head milling, employing, if possible, compressed air to blow through all oil galleries and channels.

Related Chevrolet Nova Parts