How do you remove the headlight dimmer switch?

To remove the headlight dimmer switch, start by folding back the floor mat and disconnecting the switch connector. Then, remove the two retaining screws. When installing the switch, make sure to connect the connector and test the switch operation before reversing the removal procedure.

Genuine Chevrolet Nova Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Dimmer Switches found

View related parts
Chevrolet Nova SWITCH, Headlamp Dimmer
Part Number: 94840687
Product Specifications
- Other Name: Headlamp Dimmer Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988 Chevrolet Nova | 4 DOOR, 4 DOOR NOTCHBACK, TWIN CAMSHAFT 4 DOOR
View related parts
Chevrolet Nova Switch Assembly, H/Lamp Dimmer (Except. Tilt Steering. Column)
Part Number: 94840688
Product Specifications
- Other Name: SWITCH, Headlamp Dimmer; Headlamp Dimmer Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1988 Chevrolet Nova | 4 DOOR, 4 DOOR NOTCHBACK, TWIN CAMSHAFT 4 DOOR | 4 Cyl 1.6L
View related parts
Chevrolet Nova Dimmer,Instrument Panel Lamp
Part Number: 94841824
Product Specifications
- Other Name: DIMMER, Instrument Panel/Interior Lamp Switch; Instrument Light Rheostat
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1988 Chevrolet Nova | 4 DOOR, 4 DOOR NOTCHBACK, TWIN CAMSHAFT 4 DOOR | 4 Cyl 1.6L

Chevrolet Nova Dimmer Switch Parts Questions & Experts Answers

SWITCH, Headlamp Dimmer
94840687
Q: How do you remove the headlight dimmer switch?
A: To remove the headlight dimmer switch, start by folding back the floor mat and disconnecting the switch connector. Then, remove the two retaining screws. When installing the switch, make sure to connect the connector and test the switch operation before reversing the removal procedure.