How do you remove and reinstall the front and rear exhaust manifolds in V6 engine on Chevrolet Monte Carlo?

Before starting the process of removal of the front manifold, it is necessary to detach the cable from the negative terminal of battery. Following that, you should take off the heat shields from the manifold and the crossover pipe, and then disconnect the crossover pipe from the front exhaust manifold - you'll have to take off six bolts to remove the front exhaust manifold. Starting with the rear manifold first, the alteration of the rear manifold is done in the order of the removal of the alternation, the removal of the rear manifold oxygen sensor, the removal of the manifold heat shield and lastly the removal of the heat shield of the crossover pipe. Finally, un-bolt and take out the exhaust crossover pipe and unbolt the exhaust pipe with the rear manifold nuts. It may then be removed along with the gasket, and the surfaces will be scraped to remove any old gasket material taken on the manifold in the inspection of cracks and distortions. It is suggested that when warpage is checked, the manifold should be brought to an automotive machine shop for honing. take the exhaust manifold inner heat shield and gasket out then align the manifold with the head through the new heat shield and new gasket and install the bolts. Use the wrench or your hands to tighten the mounting bolting gradually from the central and clock wise round the bolts till they reach the recommended torque. Lastly, rebuild the remainder of the components and endeavor to commence the engine; prove if there are exhaust fumes between the manifold and the cylinder head as well as the manifold and the exhaust pipe.

Genuine Chevrolet Monte Carlo Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Exhaust Manifolds found

View related parts
Chevrolet Monte Carlo Engine Exhaust Manifold
Part Number: 12568405
$203.34 MSRP: $303.21
You Save: $99.87 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Exhaust ; Manifold, Engine Exhaust Manifold; Exhaust Manifold, Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | IMPALA, LS, LT, POLICE CAR, SS | 6 Cyl 3.4L
View related parts
Chevrolet Monte Carlo Engine Exhaust Manifold Rear
Part Number: 12615497
$316.36 MSRP: $660.74
You Save: $344.38 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Exhaust Rear ; Manifold, Engine Exhaust Manifold; Exhaust Manifold, Manifold
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, SS | 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.9L
View related parts
Chevrolet Monte Carlo Engine Exhaust Manifold
Part Number: 12603753
$215.15 MSRP: $340.05
You Save: $124.90 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Exhaust Front ; Manifold, Engine Exhaust Manifold; Exhaust Manifold, Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, SS | 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.9L
View related parts
Chevrolet Monte Carlo Engine Exhaust Manifold
Part Number: 10182321
$101.84 MSRP: $303.50
You Save: $201.66 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Exhaust ; Manifold, Engine Exhaust Manifold; Exhaust Manifold, Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2003 Chevrolet Monte Carlo | IMPALA, LS, LS 4 DOOR, LTZ, LTZ 4 DOOR, LUMINA, MONTE CARLO, SS, Z34 | 6 Cyl 3.1L, 6 Cyl 3.4L
View related parts
Chevrolet Monte Carlo Engine Exhaust Manifold Assembly
Part Number: 12569054
$183.58 MSRP: $290.15
You Save: $106.57 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly, Exhaust ; Manifold, Engine Exhaust Manifold; Exhaust Manifold, Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, SS | 8 Cyl 5.3L
View related parts
Chevrolet Monte Carlo Engine Exhaust Manifold Assembly
Part Number: 12569053
$196.58 MSRP: $310.70
You Save: $114.12 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly, Exhaust ; Manifold, Engine Exhaust Manifold; Exhaust Manifold, Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, SS | 8 Cyl 5.3L
View related parts
Chevrolet Monte Carlo Exhaust Manifold
Part Number: 22530287
Product Specifications
- Other Name: Manifold,Exhaust; Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Chevrolet Monte Carlo | EL CAMINO, MONTE CARLO
View related parts
Chevrolet Monte Carlo Engine Exhaust Manifold
Part Number: 22503678
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Exhaust Manifold, Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Chevrolet Monte Carlo | EL CAMINO, MONTE CARLO
View related parts
Chevrolet Monte Carlo Exhaust Manifold
Part Number: 24507155
Product Specifications
- Other Name: Manifold, Exhaust; Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Monte Carlo | LS, LTZ 4 DOOR, LUMINA, MONTE CARLO | 6 Cyl 3.4L
View related parts
Chevrolet Monte Carlo Exhaust Manifold
Part Number: 24505127
Product Specifications
- Other Name: Manifold, Exhaust; Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Monte Carlo | LS, LS 4 DOOR, LUMINA, MONTE CARLO | 6 Cyl 3.4L
View related parts
Chevrolet Monte Carlo Exhaust Manifold, Right
Part Number: 25507804
Product Specifications
- Other Name: Manifold, Exhaust, Right ; Manifold, Exh, Rt; Exhaust Manifold, Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1985 Chevrolet Monte Carlo | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L
View related parts
Chevrolet Monte Carlo Exhaust Manifold
Part Number: 24505129
Product Specifications
- Other Name: Manifold, Exhaust; Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Monte Carlo | LS, LS 4 DOOR, LUMINA, MONTE CARLO | 6 Cyl 3.4L
View related parts
Chevrolet Monte Carlo Exhaust Manifold
Part Number: 24507154
Product Specifications
- Other Name: Manifold, Exhaust; Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Monte Carlo | LS, LTZ 4 DOOR, LUMINA, MONTE CARLO | 6 Cyl 3.4L
View related parts
Chevrolet Monte Carlo Exhaust Manifold
Part Number: 10162002
Product Specifications
- Other Name: Manifold, Exhaust; Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Monte Carlo | LS, LS 4 DOOR, LUMINA, MONTE CARLO | 6 Cyl 3.4L
View related parts
Chevrolet Monte Carlo Engine Exhaust Manifold Assembly
Part Number: 12576864
Product Specifications
- Other Name: Manifold Assembly, Exhaust ; Manifold, Engine Exhaust Manifold; Exhaust Manifold, Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chevrolet Monte Carlo | IMPALA, LS, LT, POLICE CAR, SS | 6 Cyl 3.8L
View related parts
Chevrolet Monte Carlo Engine Exhaust Manifold
Part Number: 10244605
Product Specifications
- Other Name: Manifold, Exhaust ; Manifold, Engine Exhaust Manifold; Exhaust Manifold, Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | LS, LS 4 DOOR, LUMINA, MONTE CARLO | 6 Cyl 3.1L
View related parts
Chevrolet Monte Carlo Exhaust Manifold
Part Number: 10130991
Product Specifications
- Other Name: Manifold, Exhaust; Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Monte Carlo | LS, LS 4 DOOR, LUMINA, MONTE CARLO | 6 Cyl 3.4L
View related parts
Chevrolet Monte Carlo Engine Exhaust Manifold
Part Number: 12578348
Product Specifications
- Other Name: Manifold, Exhaust ; Manifold, Engine Exhaust Manifold; Exhaust Manifold, Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | IMPALA, LS, LT, POLICE CAR, SS | 6 Cyl 3.4L
View related parts
Chevrolet Monte Carlo Engine Exhaust Manifold
Part Number: 24506309
Product Specifications
- Other Name: Manifold, Exhaust ; Manifold, Engine Exhaust Manifold; Exhaust Manifold, Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Monte Carlo | IMPALA, LS, LTZ, LTZ 4 DOOR, LUMINA, MONTE CARLO, SS, Z34 | 6 Cyl 3.1L, 6 Cyl 3.4L
View related parts
Chevrolet Monte Carlo Exhaust Manifold Assembly(Cast Iron)
Part Number: 22521449
Product Specifications
- Other Name: Manifold Assembly, Exhaust(Cast Iron); Exhaust Manifold, Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Chevrolet Monte Carlo | EL CAMINO, MONTE CARLO
- 1982-1984 Chevrolet Monte Carlo | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 8 Cyl 5.7L Diesel

| Page 1 of 2 |Next >

1-20 of 26 Results

Chevrolet Monte Carlo Exhaust Manifold

The Exhaust Manifold of Chevrolet Monte Carlo vehicles is used in channeling the hot exhaust gases from the engine to the exhaust system in order to maintain good engine performance as well as minimize emission of unhealthy gases. Located at different positions depending on the engine configuration, the manifold plays a role of ensuring that the exhaust gases pass through other parts such as the converter and the muffler, besides preventing the back flow of the intake gases, a factor that may reduce on the efficiency of the engine. Chevrolet Monte Carlo models have also come with various styles of Exhaust Manifold; these include the cast iron and the stainless steel ones, together with the high performance headers which help to reduce the flow restriction in the exhaust. Headers are the most efficient in enhancing the exhaust gas velocity hence enhancing the overall performance of the engine. Different designs and materials used in these exhaust manifolds are the cause of varying durability and efficiency of the manifolds hence the need to replace any that fail as soon as possible to avoid compromising the health and safety of the vehicle.

Each OEM Chevrolet Monte Carlo Exhaust Manifold we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Monte Carlo Exhaust Manifold Parts Questions & Experts Answers

Engine Exhaust Manifold
12603753
Q: How do you remove and reinstall the front and rear exhaust manifolds in V6 engine on Chevrolet Monte Carlo?
A: Before starting the process of removal of the front manifold, it is necessary to detach the cable from the negative terminal of battery. Following that, you should take off the heat shields from the manifold and the crossover pipe, and then disconnect the crossover pipe from the front exhaust manifold - you'll have to take off six bolts to remove the front exhaust manifold. Starting with the rear manifold first, the alteration of the rear manifold is done in the order of the removal of the alternation, the removal of the rear manifold oxygen sensor, the removal of the manifold heat shield and lastly the removal of the heat shield of the crossover pipe. Finally, un-bolt and take out the exhaust crossover pipe and unbolt the exhaust pipe with the rear manifold nuts. It may then be removed along with the gasket, and the surfaces will be scraped to remove any old gasket material taken on the manifold in the inspection of cracks and distortions. It is suggested that when warpage is checked, the manifold should be brought to an automotive machine shop for honing. take the exhaust manifold inner heat shield and gasket out then align the manifold with the head through the new heat shield and new gasket and install the bolts. Use the wrench or your hands to tighten the mounting bolting gradually from the central and clock wise round the bolts till they reach the recommended torque. Lastly, rebuild the remainder of the components and endeavor to commence the engine; prove if there are exhaust fumes between the manifold and the cylinder head as well as the manifold and the exhaust pipe.