How to remove and install the EVAP canister purge control solenoid valve,fuel tank pressure sensor and Canister on Chevrolet Malibu?

The EVAP canister purge control solenoid valve is located on the back of the intake manifold. To remove it, first disconnect the electrical connector from the valve, then disconnect the hoses. Slide the purge valve off its mounting bracket and remove it, with installation being the reverse of removal. The EVAP canister vent solenoid valve is found on the EVAP canister; to remove it, take out the EVAP canister from the vehicle and twist the valve counterclockwise, with installation also being the reverse of removal. For the fuel tank pressure sensor on 2015 and earlier models (and 2016 Malibu Limited), it is located on the top of the fuel pump module or on the side of the EVAP canister. To replace it on NUS models, remove the fuel tank, disconnect the sensor connector, and release the tab to remove the sensor. For NU6 models, loosen the left-rear wheel lug nuts, raise and support the vehicle, remove the wheel, and the under-cover below the EVAP canister, then locate and disconnect the sensor. Inspect the O-ring and replace if damaged, with installation being the reverse of removal. On 2016 and later models (except Malibu Limited), the sensor is on top of the EVAP canister or attached to the top of the fuel tank for 2019 models. Remove the fuel tank, locate the sensor, release the retaining tabs to remove the cover, disconnect the electrical connector, and remove the sensor, inspecting the O-ring for damage and reversing the removal process for installation. To remove the EVAP canister, raise the vehicle securely on jackstands, remove the fuel tank, disconnect the electrical connector and hoses from the canister, and use a screwdriver to pry the canister upwards from the fuel tank, with installation being the reverse of removal. The EVAP canister filter, found on 2016 and later models (except Malibu Limited) attached to the fuel filler pipe, requires loosening the right-rear wheel lug nuts, raising and supporting the rear of the vehicle, removing the wheel, and the inner fender liner. Locate the canister filter, disconnect the quick-connect fitting, cut the zip-ties, and remove the filter and hose, with installation being the reverse of removal and using new zip-ties in the original locations to attach the filter.

Genuine Chevrolet Malibu Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Vapor Canisters found

View related parts
Chevrolet Malibu CANISTER ASM-EVAP EMIS
Part Number: 84944778
$140.27 MSRP: $291.26
You Save: $150.99 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Replaced by: 42894755
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, RS 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu CANISTER ASM-EVAP EMIS
Part Number: 87869580
$145.41 MSRP: $301.92
You Save: $156.51 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Replaces: 22985454, 84142999, 23108015
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2017 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Canister Kit,Evap Emission
Part Number: 10376010
$207.74 MSRP: $431.34
You Save: $223.60 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CANISTER KIT, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Replaces: 15141712, 22677569
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Malibu | 4 DOOR HATCHBACK, 4 DOOR HYBRID, LS 4 DOOR HATCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR NOTCHBACK, MAXX SS 4 DOOR HATCHBACK | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.9L
View related parts
Chevrolet Malibu CANISTER ASM-EVAP EMIS
Part Number: 87869584
$119.36 MSRP: $215.06
You Save: $95.70 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Replaces: 84041475, 84493688
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu CANISTER ASM-EVAP EMIS
Part Number: 87869583
$160.74 MSRP: $289.62
You Save: $128.88 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 84407925
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Canister Kit, Evap Emission
Part Number: 15861966
$303.11 MSRP: $629.38
You Save: $326.27 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CANISTER KIT, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Malibu | 4 DOOR HYBRID, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 6 Cyl 3.5L
View related parts
Chevrolet Malibu Canister Assembly, Evap Emission
Part Number: 22730180
$196.62 MSRP: $370.98
You Save: $174.36 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Replaces: 21019497, 17113329
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chevrolet Malibu | 4 DOOR NOTCHBACK, CLASSIC 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 6 Cyl 3.1L
- 1998-1999 Chevrolet Malibu | 4 DOOR, LS 4 DOOR, LX 4 DOOR | 4 Cyl 2.4L, 6 Cyl 3.1L
View related parts
Chevrolet Malibu Canister Assembly, Evap Emission
Part Number: 22994510
$257.01 MSRP: $484.92
You Save: $227.91 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Replaces: 22740533
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Malibu | LT 4 DOOR NOTCHBACK | 4 Cyl 2.4L
View related parts
Chevrolet Malibu CANISTER ASM-EVAP EMIS
Part Number: 85609676
$93.53 MSRP: $167.76
You Save: $74.23 (45%)
ADD TO CART
Product Specifications
- Replaces: 22740535, 23116138, 84835159, 13413448, 13238457, 84080055
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2016 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L, 4 Cyl 2.4L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu CANISTER ASM-EVAP EMIS
Part Number: 85609672
$95.55 MSRP: $198.40
You Save: $102.85 (52%)
ADD TO CART
Product Specifications
- Replaces: 13413449, 84835160, 84109051
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2014 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu Canister Assembly, Evap Emis
Part Number: 84316430
$96.75 MSRP: $144.61
You Save: $47.86 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 Chevrolet Malibu | LT HYBRID 4 DOOR NOTCHBACK | 4 Cyl 1.8L
View related parts
Chevrolet Malibu Canister Assembly, Evap Emis
Part Number: 84835162
$122.98 MSRP: $221.58
You Save: $98.60 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Replaced by: 85609678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.5L
View related parts
Chevrolet Malibu CANISTER ASM-EVAP EMIS
Part Number: 87869581
$120.21 MSRP: $216.60
You Save: $96.39 (45%)
ADD TO CART
Product Specifications
- Replaces: 84266190
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Malibu | LT HYBRID 4 DOOR NOTCHBACK | 4 Cyl 1.8L
View related parts
Chevrolet Malibu Canister
Part Number: 17064622
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1983 Chevrolet Malibu | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet Malibu Canister Asm,Evap Emission
Part Number: 17113327
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Replaces: 17096147
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Malibu | 4 DOOR, LS 4 DOOR | 4 Cyl 2.4L, 6 Cyl 3.1L
View related parts
Chevrolet Malibu Canister Asm,Evap Emission
Part Number: 17113685
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Chevrolet Malibu | LS 4 DOOR, LX 4 DOOR | 6 Cyl 3.1L
View related parts
Chevrolet Malibu Canister Kit, Evap Emission
Part Number: 15790347
Product Specifications
- Other Name: CANISTER KIT, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Replaces: 10374383
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Malibu | 4 DOOR NOTCHBACK, BASE 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, SS 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.6L, 6 Cyl 3.9L

Chevrolet Malibu Vapor Canister

The Vapor Canister in Chevrolet Malibu automobiles is responsible for regulating evaporative emissions since it stores the fuel vapors from the fuel system and thereby minimizing the release of toxic hydrocarbons. This component which is commonly known as the charcoal canister make use of activated charcoal which works by adsorbing fuel vapors and expelling them into the engine for combustion. Through the years, Chevrolet Malibu models have various Vapor Canisters where latest model equipped with beauty like a canister vent solenoid and fuel tank pressure sensor to check the leakage. It is worthy of note that maintenance of the Chevrolet Malibu Vapor Canister should not be ignored as it can become saturated and thus cause fuel leak and failed emission test if the hoses are bad. To guarantee that the canister works as expected and does not present any threats to the surrounding environment, it should be cleaned and inspected on a regular basis, especially where the metal connectors are concerned.

Each OEM Chevrolet Malibu Vapor Canister we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Malibu Vapor Canister Parts Questions & Experts Answers

CANISTER ASM-EVAP EMIS
85609672
Q: How to remove and install the EVAP canister purge control solenoid valve,fuel tank pressure sensor and Canister on Chevrolet Malibu?
A: The EVAP canister purge control solenoid valve is located on the back of the intake manifold. To remove it, first disconnect the electrical connector from the valve, then disconnect the hoses. Slide the purge valve off its mounting bracket and remove it, with installation being the reverse of removal. The EVAP canister vent solenoid valve is found on the EVAP canister; to remove it, take out the EVAP canister from the vehicle and twist the valve counterclockwise, with installation also being the reverse of removal. For the fuel tank pressure sensor on 2015 and earlier models (and 2016 Malibu Limited), it is located on the top of the fuel pump module or on the side of the EVAP canister. To replace it on NUS models, remove the fuel tank, disconnect the sensor connector, and release the tab to remove the sensor. For NU6 models, loosen the left-rear wheel lug nuts, raise and support the vehicle, remove the wheel, and the under-cover below the EVAP canister, then locate and disconnect the sensor. Inspect the O-ring and replace if damaged, with installation being the reverse of removal. On 2016 and later models (except Malibu Limited), the sensor is on top of the EVAP canister or attached to the top of the fuel tank for 2019 models. Remove the fuel tank, locate the sensor, release the retaining tabs to remove the cover, disconnect the electrical connector, and remove the sensor, inspecting the O-ring for damage and reversing the removal process for installation. To remove the EVAP canister, raise the vehicle securely on jackstands, remove the fuel tank, disconnect the electrical connector and hoses from the canister, and use a screwdriver to pry the canister upwards from the fuel tank, with installation being the reverse of removal. The EVAP canister filter, found on 2016 and later models (except Malibu Limited) attached to the fuel filler pipe, requires loosening the right-rear wheel lug nuts, raising and supporting the rear of the vehicle, removing the wheel, and the inner fender liner. Locate the canister filter, disconnect the quick-connect fitting, cut the zip-ties, and remove the filter and hose, with installation being the reverse of removal and using new zip-ties in the original locations to attach the filter.