How do you replace the steering gear boot?

To replace the rack and pinion boot, start by loosening the front wheel lug nuts and raising the front of the vehicle. Support it securely on jackstands and remove the front wheels. Then, remove the tie-rod end and jam nut, as well as the steering gear heat shield if applicable. Use pliers to remove the outer rack and pinion boot clamp and cut off the inner boot clamp with diagonal cutters. Slide off the old boot and before installing the new one, wrap the threads and splines on the end of the steering linkage with tape to protect the new boot. Slide the new boot into position on the rack and pinion, ensuring the breather tube is connected correctly if equipped. Install new clamps to secure the boot in place. Remove the tape and install the tie-rod end and stabilizer bar links. Finally, install the wheels, lower the vehicle, and tighten the lug nuts to the proper torque specifications. It is recommended to have the front end alignment checked and adjusted if necessary.

Genuine Chevrolet Malibu Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Rack and Pinion Boots found

View related parts
Chevrolet Malibu Boot Kit,Steering Gear
Part Number: 26035404
$247.16 MSRP: $390.65
You Save: $143.49 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BOOT KIT, Steering Tie Rod
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Malibu | 4 DOOR, 4 DOOR NOTCHBACK, CLASSIC 4 DOOR NOTCHBACK, LS 4 DOOR, LS 4 DOOR NOTCHBACK, LX 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.1L
View related parts
Chevrolet Malibu Boot Kit,Steering Gear
Part Number: 13354440
$44.26 MSRP: $77.04
You Save: $32.78 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BOOT KIT, Steering Tie Rod; Boot Kit, Tie Rod Boot
- Replaces: 13286689
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2016 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L, 4 Cyl 2.4L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu Boot Kit, Steering Gear
Part Number: 23449527
$89.75 MSRP: $156.20
You Save: $66.45 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BOOT KIT, Steering Tie Rod; Boot Kit, Tie Rod Boot
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, RS 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu BOOT ASM-INTER STRG SHF
Part Number: 84630955
$16.32 MSRP: $25.69
You Save: $9.37 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, RS 4 DOOR NOTCHBACK | 4 Cyl 1.5L
View related parts
Chevrolet Malibu Boot Kit,Steering Gear
Part Number: 21011025
Product Specifications
- Other Name: BOOT KIT, Steering Tie Rod; Boot, Boot Kit, Inner Tie Rod Boot, Tie Rod Boot
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Malibu | 4 DOOR, LS 4 DOOR | 4 Cyl 2.4L, 6 Cyl 3.1L
View related parts
Chevrolet Malibu Boot Kit, Steering Gear
Part Number: 15944383
Product Specifications
- Other Name: BOOT KIT, Steering Tie Rod; Boot Kit, Tie Rod Boot
- Replaces: 15267559
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2012 Chevrolet Malibu | 4 DOOR HATCHBACK, 4 DOOR HYBRID, BASE 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR NOTCHBACK, MAXX SS 4 DOOR HATCHBACK, SS 4 DOOR NOTCHBACK | 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.9L
View related parts
Chevrolet Malibu Boot Kit,Steering Gear
Part Number: 15944083
Product Specifications
- Other Name: BOOT KIT, Steering Tie Rod; Boot Kit, Tie Rod Boot
- Replaces: 22687088
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Malibu | 4 DOOR HATCHBACK, 4 DOOR HYBRID, 4 DOOR NOTCHBACK, BASE 4 DOOR NOTCHBACK, LS 4 DOOR HATCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.6L, 6 Cyl 3.9L

Chevrolet Malibu Rack and Pinion Boot

The Rack and Pinion Boot in Chevrolet Malibu cars is a rubber element that located between steering wheel and the rack and pinion system to avoid other contaminants from getting into the rack and pinion system to increase the lifespan of the rack and pinion system. It indicates that through fashioning a seal on the two extremities of the rack the boot performs a very vital role of eradicating any possible harm as well as preserving the efficacy of the steering apparatus. Damage to the Rack and Pinion Boot create loophole to the working mechanism of the steering system, making it more susceptible to failure. Of course, throughout the production of Malibu models, various types or styles of Rack and Pinion Boot may have been used, and these will have their own features and characteristics for the optimal performance and long lasting.

Each OEM Chevrolet Malibu Rack and Pinion Boot we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Malibu Rack and Pinion Boot Parts Questions & Experts Answers

Boot Kit, Steering Gear
23449527
Q: How do you replace the steering gear boot?
A: To replace the rack and pinion boot, start by loosening the front wheel lug nuts and raising the front of the vehicle. Support it securely on jackstands and remove the front wheels. Then, remove the tie-rod end and jam nut, as well as the steering gear heat shield if applicable. Use pliers to remove the outer rack and pinion boot clamp and cut off the inner boot clamp with diagonal cutters. Slide off the old boot and before installing the new one, wrap the threads and splines on the end of the steering linkage with tape to protect the new boot. Slide the new boot into position on the rack and pinion, ensuring the breather tube is connected correctly if equipped. Install new clamps to secure the boot in place. Remove the tape and install the tie-rod end and stabilizer bar links. Finally, install the wheels, lower the vehicle, and tighten the lug nuts to the proper torque specifications. It is recommended to have the front end alignment checked and adjusted if necessary.