My Garage
My Account
Cart
Genuine Chevrolet K1500 Window Regulator
Electric Power Window Regulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Window Regulators found
Chevrolet K1500 Front Side Door Window Regulator Kit (Manual) (RH)
Part Number: 22071950$177.12 MSRP: $334.18You Save: $157.06 (47%)Ships in 1-2 Business Days
Chevrolet K1500 Window Regulator
The Window Regulator in Chevrolet K1500 is a device that enables the control of the window by either raising or lowering it besides holding the window glass to a required position. These regulators can either be transverse and longitudinal with electric motor operation or crank operated. Due to their frequent use, they are likely to get damaged in one way or the other, which possibly will lead to their failure, for example, windows fail to open. Chevrolet K1500 since models have used various types of window regulators; scissor and cable. Each of them is designed to fit superior requirements, thus compatibility is of no issue and installation is also problems free. By changing the defective K1500 window regulators for improved ones, vehicle owners shall be in a position to regain the expected efficiency and ease of use of their automobile's windows.
Each OEM Chevrolet K1500 Window Regulator we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet K1500 Window Regulator Parts Questions & Experts Answers
- Q: How to remove and install a door glass and regulator?A: Lower the glass completely. Remove the door trim panel and the watershield. Remove the retaining screws, pull the door module back and disconnect the door lock and handle rods. Remove the electrical connector, if equipped. Remove the two glass run channel bolts and move the run channel away from the glass. Tilt the door module and window glass assembly and lower it out the bottom of the door. Bend the tab down on the window run channel to slide the door glass from the regulator assembly. For access to the power regulator components, drill out the rivets from the inside handle housing. On reassembly, use sheet metal screws in place of the rivets. Drill out the rivets from the regulator assembly and separate the regulator from the door module. On reassembly, use sheet metal screws in place of the rivets. Prior to installation, lubricate the window regulator mechanism with chassis grease. Installation of the glass and regulator is the reverse of removal.
