How to check the fuel level sending unit?

To check the fuel level sensor, start by removing the fuel tank and the fuel level sensor or fuel pump module. Connect the probes of an ohmmeter to the fuel level sensor terminals of the fuel pump electrical connector. Position the float in the down position and note the reading on the ohmmeter. Move the float up to the full position and observe the meter. If the fuel level sensor resistance does not change smoothly as the float travels from empty to full, it needs to be replaced. For 1988 through 1996 models, remove the fuel tank and the fuel pump/fuel level sensor. Disconnect the sensor harness connector and remove the sensor mounting screws. Separate the sensor from the frame of the fuel pump/sensor assembly. Installation is the reverse of removal. For 1997 through 2000 models, remove the fuel tank and the fuel pump module. Disconnect the fuel level sensor electrical connector from the module cover and remove the sensor retaining clip. Pinch the tabs together and slide the fuel level sensor off the module, noting the wiring routing for installation. Installation is the reverse of removal.

Genuine Chevrolet K1500 Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Level Sensors found

View related parts
Chevrolet K1500 Fuel Tank Meter/Pump SENSOR KIT
Part Number: 19121306
$71.74 MSRP: $218.96
You Save: $147.22 (68%)
ADD TO CART
Product Specifications
- Other Name: Sensor Kit,Fuel Level ; Sensor Kit, Fuel Tank Meter/Pump; Fuel Gauge
- Replaces: 25175914, 25314226
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet K1500 | K1500 EXTENDED CAB LONG BOX, K1500 EXTENDED CAB STANDARD BOX, K1500 REGULAR CAB LONG BOX, K1500 REGULAR CAB STANDARD BOX | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet K1500 Fuel Tank Meter/Pump SENSOR KIT
Part Number: 25314215
Product Specifications
- Other Name: Sensor Kit,Fuel Level ; Sensor Kit, Fuel Tank Meter/Pump
- Replaces: 25170813
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet K1500 | K1500 EXTENDED CAB LONG BOX, K1500 EXTENDED CAB STANDARD BOX, K1500 REGULAR CAB LONG BOX, K1500 REGULAR CAB STANDARD BOX | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet K1500 Fuel Sender Assembly
Part Number: 19179420
Product Specifications
- Other Name: Sender Asm,Fuel ; Sender, Fuel Tank Meter/Pump; Fuel Gauge Sending Unit, Sending Unit
- Replaces: 25028613
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1998 Chevrolet K1500 | K1500 EXTENDED CAB LONG BOX, K1500 EXTENDED CAB STANDARD BOX, K1500 REGULAR CAB LONG BOX, K1500 REGULAR CAB STANDARD BOX | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 6.5L Diesel
View related parts
Chevrolet K1500 Fuel Tank Meter/Pump SENDER KIT
Part Number: 19111396
Product Specifications
- Other Name: Sender Kit,Fuel; Sending Unit
- Replaces: 25028611, 25028499
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1995 Chevrolet K1500 | K1500 EXTENDED CAB LONG BOX, K1500 EXTENDED CAB STANDARD BOX, K1500 REGULAR CAB LONG BOX, K1500 REGULAR CAB STANDARD BOX | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel
View related parts
Chevrolet K1500 Fuel Tank Meter/Pump Meter
Part Number: 25028501
Product Specifications
- Other Name: Sender,Fuel ; Sender, Fuel Tank Meter/Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 Chevrolet K1500 | K1500 EXTENDED CAB LONG BOX, K1500 EXTENDED CAB STANDARD BOX, K1500 REGULAR CAB LONG BOX, K1500 REGULAR CAB STANDARD BOX | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel
View related parts
Chevrolet K1500 Fuel Sender Assembly
Part Number: 19180462
Product Specifications
- Other Name: Sender Asm,Fuel ; Sender, Fuel Tank Meter/Pump; Sending Unit
- Replaces: 25027416
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1999 Chevrolet K1500 | K1500 EXTENDED CAB LONG BOX, K1500 EXTENDED CAB STANDARD BOX, K1500 REGULAR CAB LONG BOX, K1500 REGULAR CAB STANDARD BOX | 8 Cyl 6.5L Diesel

Chevrolet K1500 Fuel Level Sensor

The Fuel Level Sensor in Chevrolet K1500 cars can keep the driver informed about the degree of fuel in the tank. These are electronic devices that have the capability of measuring the fuel level even when it is hot and in the process, give the driver the correct and fast information that he or she requires. The item is made up of float, an actuating rod and a resistor and its main function is to pass a signal to the fuel gauge. Any trouble with the fuel level sensor requires the car to be taken to an automotive professional to rectify the problem to allow for correct readings for individuals to know when to fill up the car.

Each OEM Chevrolet K1500 Fuel Level Sensor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet K1500 Fuel Level Sensor Parts Questions & Experts Answers

Fuel Tank Meter/Pump SENSOR KIT
25314215
Q: How to check the fuel level sending unit?
A: To check the fuel level sensor, start by removing the Fuel Tank and the fuel level sensor or Fuel Pump module. Connect the probes of an ohmmeter to the fuel level sensor terminals of the fuel pump electrical connector. Position the float in the down position and note the reading on the ohmmeter. Move the float up to the full position and observe the meter. If the fuel level sensor resistance does not change smoothly as the float travels from empty to full, it needs to be replaced. For 1988 through 1996 models, remove the fuel tank and the fuel pump/fuel level sensor. Disconnect the sensor harness connector and remove the sensor mounting screws. Separate the sensor from the frame of the fuel pump/sensor assembly. Installation is the reverse of removal. For 1997 through 2000 models, remove the fuel tank and the fuel pump module. Disconnect the fuel level sensor electrical connector from the module cover and remove the sensor retaining clip. Pinch the tabs together and slide the fuel level sensor off the module, noting the wiring routing for installation. Installation is the reverse of removal.