My Garage
My Account
Cart
Genuine Chevrolet K1500 Fuel Injector
Gas Injector- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
23 Fuel Injectors found
Chevrolet K1500 Indirect Fuel Injector Kit
Part Number: 12458121$41.81 MSRP: $121.40You Save: $79.59 (66%)Ships in 1-2 Business Days
Chevrolet K1500 Fuel Injector
Part Number: 19210687$546.80 MSRP: $1135.38You Save: $588.58 (52%)Ships in 1-3 Business Days
Chevrolet K1500 Throttle Body Fuel Injector Assembly
Part Number: 19110537$158.33 MSRP: $285.28You Save: $126.95 (45%)Ships in 1-3 Business Days
Chevrolet K1500 Throttle Body Injector Kit
Part Number: 17112521$142.86 MSRP: $257.40You Save: $114.54 (45%)Ships in 1-3 Business Days
Chevrolet K1500 Throttle Body Fuel Injector
Part Number: 19110532$142.86 MSRP: $257.40You Save: $114.54 (45%)Ships in 1-3 Business DaysChevrolet K1500 Throttle Body Injector Kit
Part Number: 17112560$130.92 MSRP: $235.90You Save: $104.98 (45%)Ships in 1-3 Business Days
Chevrolet K1500 Throttle Body Fuel Injector Assembly
Part Number: 19110538$213.00 MSRP: $383.78You Save: $170.78 (45%)
Chevrolet K1500 Throttle Body Fuel Injector Assembly
Part Number: 19110533$130.92 MSRP: $235.90You Save: $104.98 (45%)
Chevrolet K1500 Injector Asm,Central Sequential Multiport Fuel
Part Number: 19210688$423.08 MSRP: $762.31You Save: $339.23 (45%)
| Page 1 of 2 |Next >
1-20 of 23 Results
Chevrolet K1500 Fuel Injector
Fuel Injector is one of the used automotive products in Chevrolet K1500 vehicles; it is the device that directly injects fuel into the engine cylinders with the help of Engine Control Module to provide an ideal proportion of air and fuel. This system is "returnless" which minimizes the number of fuel lines and eliminates failures that may result in low performance and fuel consumption of the engine. Over the years, there have also been changes in the type of injector used in K1500 and they include direct and indirect injector where in each type the process of fuel delivery is carried out and the synchronization process differs. In conclusion, the Fuel Injector can be said to be very instrumental in the improvement of engines performance and efficiency as compared to the use of a carburetor object.
Each OEM Chevrolet K1500 Fuel Injector we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet K1500 Fuel Injector Parts Questions & Experts Answers
- Q: How to replace components of the fuel rail and injector assembly on Chevrolet K1500?A: All open fittings, lines and holes must be capped or plugged to prevent dirt from entering the system when any components are removed. When replacing components of the fuel rail and injector assembly, fuel injectors are calibrated with different flow rates and must not be interchanged with injectors from a different application. To replace the Throttle Body, remove the air inlet duct and disconnect the wiring connectors from the Idle Air Control (IAC) valve and Throttle Position Sensor (TPS). Detach the accelerator cable and cruise control cable (if equipped) from the throttle body, remove the accelerator cable bracket, and then remove the throttle body bolts and the throttle body. Clean the gasket surfaces and install a new gasket before reinstallation. To replace the fuel rail assembly, remove the distributor and upper intake manifold. Disconnect the fuel supply and return lines from the fuel rail, remove the fuel line bracket bolt, and detach the fuel line from the bracket. Disconnect the fuel injector wiring harness from each injector and set the harness aside. Remove all five fuel rail retaining bolts, disconnect the vacuum line at the fuel pressure regulator, and carefully lift the fuel rail up to detach the injectors from the intake manifold ports. Remove the injectors from the fuel rail by removing the injector retaining clip and pulling the injector out. Discard the injector retaining clips and O-rings, and install new ones on reassembly. Lubricate each new O-ring with clean engine oil and install them onto the injectors. Install the injectors onto the fuel rail and retain them with a new retaining clip. Install the complete fuel rail assembly onto the manifold, making sure the injector electrical connectors face outward. To replace the fuel pressure regulator, remove the ignition coil and upper intake manifold. Detach the vacuum line from the fuel pressure regulator and remove the snap-ring retaining the regulator to the fuel rail. Place a rag under the regulator to collect fuel spillage, then twist and pull it out of the fuel rail. Remove the O-rings from the regulator and install new ones in the correct order. Insert the regulator into the fuel rail and install the snap ring, ensuring it is fully engaged in the groove. Verify the installation by pulling on the regulator. The remainder of the installation is the reverse of removal. Turn the ignition On and check for fuel leaks.
