How to remove the A/C Condenser?

To remove the air conditioning system, start by discharging the system. Then, remove the air filter housing and the radiator. Disconnect the two refrigerant lines for the condenser, making sure to plug all open lines and fittings to prevent contamination. Carefully guide the condenser out of the engine compartment and remove the sealing washers from the fittings and tubes. For installation, if a new condenser is being installed, pour one ounce of refrigerant oil into it before installation. Use new sealing washers when reconnecting the refrigerant lines and tighten the condenser line fitting nut to the specified torque. Finally, reverse the removal steps and have the system evacuated, recharged, and leak tested.

Genuine Chevrolet Impala A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 A/C Condensers found

View related parts
Chevrolet Impala Condenser Assembly, A/C
Part Number: 23305638
$206.74 MSRP: $310.42
You Save: $103.68 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CONDENSER, A/C Condenser; Condenser, Radiator
- Replaces: 13267649, 22869501
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
Chevrolet Impala Condenser Asm,A/C
Part Number: 89019322
$112.02 MSRP: $222.28
You Save: $110.26 (50%)
ADD TO CART
Product Specifications
- Other Name: CONDENSER, A/C Condenser; Condenser, Condenser Assembly
- Replaces: 89018841, 89018670
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet Impala | LS, LS POLICE CAR, LT, LT 3.5, LTZ, SS | 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.9L, 6 Cyl 3.9L Flex
View related parts
Chevrolet Impala Condenser,A/C
Part Number: 52485722
Product Specifications
- Other Name: CONDENSER, A/C Condenser; Condenser
- Replaces: 03050450, 03037438, 03037439, 3037438, 3037439, 3050450
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1985 Chevrolet Impala | 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet Impala Condenser Assembly, A/C
Part Number: 84333231
$189.27 MSRP: $284.18
You Save: $94.91 (34%)
Product Specifications
- Other Name: Condenser, Condenser Assembly
- Replaces: 19260303, 23287351, 22845454, 89018842, 89018660
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2016 Chevrolet Impala | LS, LS POLICE CAR, LT, LT 3.5, LTZ, SS | 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.9L, 6 Cyl 3.9L Flex, 8 Cyl 5.3L
View related parts
Chevrolet Impala Condenser Assembly, A/C
Part Number: 52481282
Product Specifications
- Other Name: CONDENSER, A/C Condenser; Condenser
- Replaces: 52471382
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2001 Chevrolet Impala | IMPALA, LS, LUMINA, SS
View related parts
Chevrolet Impala Condenser Asm,A/C
Part Number: 19130292
Product Specifications
- Other Name: CONDENSER, A/C Condenser; Condenser, Condenser Assembly
- Replaces: 89018484, 88957444
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Impala | IMPALA, LS, LT, POLICE CAR, SS | 6 Cyl 3.4L, 6 Cyl 3.8L
View related parts
Chevrolet Impala Condenser Assembly, A/C
Part Number: 52479857
Product Specifications
- Other Name: CONDENSER, A/C Condenser; Condenser, Condenser Assembly
- Replaces: 52479998, 52477671
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Impala | IMPALA, LS, SS | 6 Cyl 3.4L, 6 Cyl 3.8L

Chevrolet Impala A/C Condenser

Of all Chevrolet Impala vehicles, the A/C Condenser has the role of a heat exchanger that converts this refrigerant gas back into liquid refrigerant. It is located before the radiator to help expel air outside after the condensation procedure to eliminate the heat collected in the system. This particular one plays a crucial role in the functioning of the A/C system that works by evaporation, condensation, compression as well as expansion to enforce cool-air distribution inside a car's vents. Variation in the A/C Condenser between the Impala models of different years might exist; however, the basic pattern has been maintained. The primary problem associated with these condensers is leakage which is probably an easier matter to diagnose than some other problems. In case of a leakage, replacement is commonly called-for as frequently, repairs may not be feasible for continuing functionality. In conclusion the A/C condenser is a very important component in keeping the passengers comfortable by keeping the interior of the vehicle cool.

Each OEM Chevrolet Impala A/C Condenser we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Impala A/C Condenser Parts Questions & Experts Answers

Condenser Asm,A/C
89019322
Q: How to remove the A/C Condenser?
A: To remove the air conditioning system, start by discharging the system. Then, remove the air filter housing and the Radiator. Disconnect the two refrigerant lines for the condenser, making sure to plug all open lines and fittings to prevent contamination. Carefully guide the condenser out of the engine compartment and remove the sealing washers from the fittings and tubes. For installation, if a new condenser is being installed, pour one ounce of refrigerant oil into it before installation. Use new sealing washers when reconnecting the refrigerant lines and tighten the condenser line fitting nut to the specified torque. Finally, reverse the removal steps and have the system evacuated, recharged, and leak tested.