Where is the brake light switch located and how do you replace it on Chevrolet Cobalt,HHR and Saturn ION?

The brake light switch is at the top of the brake pedal bracket. To remove the switch, remove the insulator panel from below the knee bolster if equipped. Then, disconnect the electrical connector at the switch and rotate the switch counterclockwise while pulling to remove it. To install the new switch, rotate it clockwise while inserting it into the mounting bracket and connect the electrical connector. Finally, apply the brake pedal, release it, and verify that the brake lights turn off when the pedal is released.

How do you remove the Brake Light Switch for Chevrolet Cobalt,HHR and Saturn ION?

To remove the brake light switch, remove the insulation panel and the knee bolster and disconnect the electrical connector at the switch. Remove the switch mounting fastener and remove the switch from the bracket. Install the switch to the bracket and tighten the switch mounting fastener securely.

Genuine Chevrolet HHR Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Light Switches found

View related parts
Chevrolet HHR Switch,Stop Lamp & Automatic Transmission Shift Lock & Cruise Control Release
Part Number: 12450036
$15.29 MSRP: $24.02
You Save: $8.73 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet HHR | 5 DOOR HIGH ROOF HATCHBACK, 5 DOOR HIGH ROOF PANEL, 5 DOOR UPLEVEL HIGH ROOF HATCHBACK, 5 DOOR UPLEVEL HIGH ROOF PANEL | 4 Cyl 2.2L, 4 Cyl 2.4L
View related parts
Chevrolet HHR Sensor Assembly, Brake Pedal Position
Part Number: 13597428
$8.77 MSRP: $16.54
You Save: $7.77 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Brake; Clutch Switch, Stoplamp Switch
- Replaced by: 13549051
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2011 Chevrolet HHR | 5 DOOR HIGH ROOF HATCHBACK, 5 DOOR HIGH ROOF HATCHBACK SS, 5 DOOR HIGH ROOF PANEL, 5 DOOR HIGH ROOF PANEL SS, 5 DOOR UPLEVEL HIGH ROOF HATCHBACK, 5 DOOR UPLEVEL HIGH ROOF PANEL | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 4 Cyl 2.4L

Chevrolet HHR Brake Light Switch

Chevrolet HHR brake light switch is another part that is responsible for the activation of the brake lights every time the brakes are applied to give a signal to other motorists on the road that the car is slowing down or coming to a standstill. This mechanism is of great importance in assuring road safety for it informs those behind the movements of the vehicle. This means that there are differences in respect of the type or the model of the Brake Light Switch used in Chevrolet HHR models throughout the years It should however be noted that the main purpose of the Brake Light Switch of any car model, including Chevrolet HHR, still remain fixed.

Each OEM Chevrolet HHR Brake Light Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet HHR Brake Light Switch Parts Questions & Experts Answers

Switch,Stop Lamp & Automatic Transmission Shift Lock & Cruise Control Release
12450036
Q: Where is the brake light switch located and how do you replace it on Chevrolet Cobalt,HHR and Saturn ION?
A: The brake light switch is at the top of the brake pedal bracket. To remove the switch, remove the insulator panel from below the knee bolster if equipped. Then, disconnect the electrical connector at the switch and rotate the switch counterclockwise while pulling to remove it. To install the new switch, rotate it clockwise while inserting it into the mounting bracket and connect the electrical connector. Finally, apply the brake pedal, release it, and verify that the brake lights turn off when the pedal is released.
Sensor Assembly, Brake Pedal Position
13597428
Q: How do you remove the Brake Light Switch for Chevrolet Cobalt,HHR and Saturn ION?
A: To remove the brake light switch, remove the insulation panel and the knee bolster and disconnect the electrical connector at the switch. Remove the switch mounting fastener and remove the switch from the bracket. Install the switch to the bracket and tighten the switch mounting fastener securely.