Other Name: HANDLE, Door Lock Remote Control Inside; Inside Handle
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2000 Chevrolet Express | 1 TON CARGO EXPRESS, 1 TON COMMERCIAL/RECREATIONAL VEHICLE EXPRESS, 1 TON PASSENGER, 1/2 TON CARGO EXPRESS, 1/2 TON PASSENGER EXPRESS, 3/4 TON CARGO EXPRESS, 3/4 TON PASSENGER EXPRESS | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.5L Diesel, 8 Cyl 7.4L
| Page 1 of 3 |Next >
1-20 of 46 Results
Chevrolet Express Door Handle
Each OEM Chevrolet Express Door Handle we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Express Door Handle Parts Questions & Experts Answers
Q: How do you remove the Door Handle,Door Latch Assembly and Door Lock Cylinder?
A: To remove the door latch, remove the door trim panel and water shield, if it's the front door, remove the rear glass run channel, or if it's a sliding door, remove the door control assembly. Then, remove the screws securing the latch to the door and adjust the latch to disconnect the electrical connector (if equipped) and detach the rods, and latch assembly from the door. For installation, simply follow the reverse of the removal procedure. To remove the inside door handle, remove the door trim panel, and the water shield, drill out the rivet securing the inside door, detach the rods from the inside door handle, and remove the handle. Installation is the reverse of the removal procedure. To remove the upper door latch striker from the rear side door, remove the striker mounting bolts and the striker. Installation is the reverse of removal.