How do you remove the power steering pump on Chevrolet Equinox?

To remove the power steering pump, start by removing the drivebelt and draining as much fluid as possible from the reservoir. Place a drain pan under the pump and disconnect the feed hose and pressure line, plugging or capping all openings to prevent contamination. Then, remove the pump mounting fasteners and carefully guide the pump out through the right fender well, being cautious not to spill any fluid on painted surfaces. To install the new pump, position it and secure it with the mounting fasteners, tightening them to the specified torque. Connect the pressure line and feed hose, ensuring all connections are secure. Install the drivebelt and fill the power steering reservoir with the recommended fluid. Finally, bleed the system to ensure proper operation.

Genuine Chevrolet Equinox Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Power Steering Pumps found

View related parts
Chevrolet Equinox Pump Assembly, P/S
Part Number: 13580490
$214.29 MSRP: $425.15
You Save: $210.86 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Chevrolet Equinox | LT SUV, LTZ SUV | 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
Chevrolet Equinox Pump Assembly, P/S
Part Number: 13577682
$210.15 MSRP: $416.93
You Save: $206.78 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Replaces: 13505835, 25950529, 13576573
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2011 Chevrolet Equinox | LT SUV, LTZ SUV | 6 Cyl 3.0L
View related parts
Chevrolet Equinox Pump Assembly, P/S
Part Number: 20902363
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Replaces: 25803117, 25964298
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | SS SUV AWD, SS SUV FWD, SUV AWD, SUV FWD, SUV LT AWD, SUV LT FWD | 6 Cyl 3.6L

Chevrolet Equinox Power Steering Pump

Power Steering Pump is one of the vital systems of Chevrolet Equinox automobiles that translates energy derived from the engine into hydraulic power to steer. Through supplying this hydraulic power to the steering mechanism, this pump relieves the amount of force required to turn the steering wheel during large vehicle operation. Equinox may incorporate hydraulic or electrical power boost to increase the steering input and rack, have linkage between the steering wheel and wheels for the manual control in the event of power steering failure. Given that there are alternatives in steering technologies such as hydraulic, electric, and electronic steering systems, the Power Steering Pump is significant in decreasing the force needed by the driver and thus improving the control of the automotive vehicle.

Each OEM Chevrolet Equinox Power Steering Pump we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Equinox Power Steering Pump Parts Questions & Experts Answers

Pump Assembly, P/S
13580490
Q: How do you remove the power steering pump on Chevrolet Equinox?
A: To remove the power steering pump, start by removing the drivebelt and draining as much fluid as possible from the reservoir. Place a drain pan under the pump and disconnect the feed hose and pressure line, plugging or capping all openings to prevent contamination. Then, remove the pump mounting fasteners and carefully guide the pump out through the right fender well, being cautious not to spill any fluid on painted surfaces. To install the new pump, position it and secure it with the mounting fasteners, tightening them to the specified torque. Connect the pressure line and feed hose, ensuring all connections are secure. Install the drivebelt and fill the power steering reservoir with the recommended fluid. Finally, bleed the system to ensure proper operation.