How do you remove and install a driveshaft on Chevrolet Equinox,GMC Terrain and Pontiac Torrent?

To remove and install a driveshaft on a vehicle, start by raising the vehicle and supporting it securely on jackstands. Place the shift selector lever in Neutral. Use chalk or a scribe to mark the relationship of the driveshaft to the differential pinion yoke and the flange at the transfer case. Disconnect the rear U-joint of the driveshaft from the rear differential assembly. Then, remove the front constant velocity joint bolts from the transfer case and the mounting bolts from the center support bearing. Finally, remove the driveshaft from the vehicle. To install the driveshaft, reverse the removal steps and make sure the marks made previously are aligned. Tighten the fasteners to the proper torque specifications.

Genuine Chevrolet Equinox Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Drive Shafts found

View related parts
Chevrolet Equinox Propeller Shaft Assembly
Part Number: 84139112
$417.15 MSRP: $679.89
You Save: $262.74 (39%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft
- Replaced by: 85068914
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Chevrolet Equinox | 4 DOOR BASE (GMNA), 4 DOOR LT (GMNA), 4 DOOR LTZ (GMNA) | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
Chevrolet Equinox Propeller Shaft Assembly
Part Number: 84214206
$1291.08 MSRP: $1740.00
You Save: $448.92 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Drive Shaft Assembly
- Replaces: 20824105, 20992595, 23481375
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | LS SUV, LT SUV, LTZ SUV | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chevrolet Equinox Propeller Shaft Assembly
Part Number: 84214207
$1227.74 MSRP: $1740.00
You Save: $512.26 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Drive Shaft Assembly
- Replaces: 20824104, 20992596, 23481373
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | LT SUV, LTZ SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
Chevrolet Equinox Propeller Shaft Assembly
Part Number: 19355361
$1005.91 MSRP: $1300.47
You Save: $294.56 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Asm,Propeller; Drive Shaft
- Replaces: 25918054, 20811303, 25793000, 19328628
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chevrolet Equinox | SUV AWD | 6 Cyl 3.4L
View related parts
Chevrolet Equinox Propeller Shaft Assembly
Part Number: 19355360
Product Specifications
- Other Name: Shaft Asm,Propeller; Drive Shaft
- Replaces: 19328627, 25793002, 20811302
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | SUV AWD | 6 Cyl 3.6L
View related parts
Chevrolet Equinox Front & Rear Propeller Shaft Kit
Part Number: 19259831
Product Specifications
- Other Name: Shaft Kit,Front & Rear Propeller; Drive Shaft
- Position: Front and Rear
- Replaces: 19152721
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Equinox | SUV AWD | 6 Cyl 3.4L

Chevrolet Equinox Drive Shaft Parts Questions & Experts Answers

Propeller Shaft Assembly
19355361
Q: How do you remove and install a driveshaft on Chevrolet Equinox,GMC Terrain and Pontiac Torrent?
A: To remove and install a driveshaft on a vehicle, start by raising the vehicle and supporting it securely on jackstands. Place the shift selector lever in Neutral. Use chalk or a scribe to mark the relationship of the driveshaft to the Differential pinion yoke and the flange at the transfer case. Disconnect the rear U-joint of the driveshaft from the rear differential assembly. Then, remove the front constant velocity joint bolts from the transfer case and the mounting bolts from the center support bearing. Finally, remove the driveshaft from the vehicle. To install the driveshaft, reverse the removal steps and make sure the marks made previously are aligned. Tighten the fasteners to the proper torque specifications.