How to remove and reinstall the throttle body on Chevrolet Cruze?

Disengage the cable from the negative battery terminal. In 2016 and later versions, completely remove engine cover fasteners and take off the oil filler cap. Pick up the valve cover insulator along with engine cover and thereafter reinstall an individual oil filler cap. It might be necessary to remove both cover and insulator separately. On 1.8 L models, remove the throttle body air inlet duct. On 1.4 L models, eliminate charge air cooler outlet pipe from a throttle body. By disconnecting it, unplug throttle actuator motor electrical connector and detach charge air cooler pipe from it. To disconnect electrical connector push up lock then unlock by depressing release tab Remove throttle body mounting bolts that hold it in place before removing throttle body itself Remove and inspect throttle body O-ring If it is not soiled or torn or damaged, you can reuse it If damaged or worn replace Installation is opposite of removal Tighten down throttle body mounting bolts Begin vehicle's engine running to check for proper operation of throttle body as well as absence of any air leaks Once battery has been disconnected; prior knowledge about drivability and performance features needs to be regained by PCM.

Genuine Chevrolet Cruze Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Throttle Bodies found

View related parts
Chevrolet Cruze Throttle Body Assembly
Part Number: 55565489
$146.52 MSRP: $304.23
You Save: $157.71 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body Assembly, Throttle ; Body, Fuel Injection Air Meter; Throttle Body
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chevrolet Cruze | LT / LTZ 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK | 4 Cyl 1.4L
View related parts
Chevrolet Cruze Fuel Injection Air Meter Body
Part Number: 55561495
$175.25 MSRP: $315.76
You Save: $140.51 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Body,Throttle ; Body, Fuel Injection Air Meter; Throttle Body
- Replaces: 55577375
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chevrolet Cruze | LS 4 DOOR NOTCHBACK, LT / LTZ 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK | 4 Cyl 1.8L
View related parts
Chevrolet Cruze Throttle Body Assembly (W/ Sensor)
Part Number: 12671379
$101.83 MSRP: $211.44
You Save: $109.61 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body Assembly, Throttle (W/ Sensor); Throttle Body
- Replaces: 12659491
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2019 Chevrolet Cruze | LS 4 DOOR HATCHBACK, LS 4 DOOR SEDAN, LT 4 DOOR HATCHBACK, LT 4 DOOR SEDAN, LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR SEDAN | 4 Cyl 1.4L
View related parts
Chevrolet Cruze Throttle Body Assembly (W/ Sensor)
Part Number: 12675730
$90.78 MSRP: $188.48
You Save: $97.70 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body Assembly, Throttle (W/ Sensor); Throttle Body
- Replaces: 12669336, 12644239
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 Chevrolet Cruze | LS , LT , LTZ | 4 Cyl 1.4L
View related parts
Chevrolet Cruze Throttle Body Assembly (W/ Throttle Actuator)
Part Number: 12645663
$167.51 MSRP: $304.56
You Save: $137.05 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body Assembly, Throttle (W/ Throttle Actuator)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Cruze | LT / LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L Diesel
View related parts
Chevrolet Cruze Throttle Body Assembly (W/ Sensor)
Part Number: 55496779
$87.13 MSRP: $156.28
You Save: $69.15 (45%)
Product Specifications
- Other Name: Body Assembly, Throttle (W/ Sensor) ; Body Assembly, Throt (W/ Sen); Throttle Body
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2019 Chevrolet Cruze | LT 4 DOOR HATCHBACK, LT 4 DOOR SEDAN | 4 Cyl 1.6L Diesel

Chevrolet Cruze Throttle Body

The Throttle Body is an integrated part in Chevrolet Cruze vehicles that regulates the amount of air get into the engine in proportion to the rate that the driver puts the accelerator pedal. The throttle body is located between the air filter box and the intake manifold with a butterfly valve that regulates the amount of air to be admitted into the system. In the contemporary fuel injected engines, the throttle body is managed by electronics, thus giving precise fuel value to the injectors in response to feedback information. Also, the throttle body might contain the Idle Air Control Valve to control the air flowing rate during Idle circumstances. Although there are cars that have more than one throttle body for better performance, the main throttle body in Chevrole Cruze car is extremely significant in the engine responsiveness and reliability.

Each OEM Chevrolet Cruze Throttle Body we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Cruze Throttle Body Parts Questions & Experts Answers

Throttle Body Assembly
55565489
Q: How to remove and reinstall the throttle body on Chevrolet Cruze?
A: Disengage the cable from the negative battery terminal. In 2016 and later versions, completely remove engine cover fasteners and take off the oil filler cap. Pick up the valve cover insulator along with engine cover and thereafter reinstall an individual oil filler cap. It might be necessary to remove both cover and insulator separately. On 1.8 L models, remove the throttle body air inlet duct. On 1.4 L models, eliminate charge air cooler outlet pipe from a throttle body. By disconnecting it, unplug throttle actuator motor electrical connector and detach charge air cooler pipe from it. To disconnect electrical connector push up lock then unlock by depressing release tab Remove throttle body mounting bolts that hold it in place before removing throttle body itself Remove and inspect throttle body O-ring If it is not soiled or torn or damaged, you can reuse it If damaged or worn replace Installation is opposite of removal Tighten down throttle body mounting bolts Begin vehicle's engine running to check for proper operation of throttle body as well as absence of any air leaks Once battery has been disconnected; prior knowledge about drivability and performance features needs to be regained by PCM.