How do you remove the shift knob and disconnect the shift cables on Chevrolet Cruze?

To remove the shift knob, use a small screwdriver or trim tool to disengage the shift boot retainers at the front edge, slide the boot forward to disengage the rear retainers, and lift the boot up. Depress the two tabs below the retaining ring on the shift lever while lifting the ring until it is freed. Once loose, depress and lift the reverse lock-out tab at the base of the shifter until disengaged, then remove the shift knob, reverse lockout unit, and boot as an assembly from the shift lever. Separate the shift knob from the reverse lock-out unit by lifting the retaining tab. For the shift cables, disconnect the negative battery cable, remove the floor center console side trim panels and shifter bezel, and lift the shifter boot. Disconnect the rear air outlet duct from the instrument panel, lift the cable-retaining clips at the rear of the shifter assembly, and release the cable ends. Remove the battery and battery tray, then the driver's side knee bolster. Mark each cable end for connection, pop the shift cable ends from the transaxle shift arm, and pull the cables through the firewall grommet. For cable adjustment, lift the cable retaining clips without disconnecting them, release the internal cable, and insert a 5 mm Allen wrench or drill bit through the hole in the shift lever to lock it in place. At the transaxle end, press the block in while pushing the select lever backwards, then secure each cable by snapping the locking tabs down at the rear of the shifter. Remove the Allen wrench or drill bit, push the select lever backwards slightly while pulling the block out, and check for proper shifting of the transaxle. The remaining installation follows the reverse of the removal process.

Genuine Chevrolet Cruze Shift Knob

Gear Shift Knobs

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Shift Knobs found

View related parts
Chevrolet Cruze Knob,Automatic Transmission Control Lever
Part Number: 95976137
$28.73 MSRP: $42.95
You Save: $14.22 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: KNOB, Transmission Control Lever; Shift Knob
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chevrolet Cruze | LS 4 DOOR NOTCHBACK, LT / LTZ 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK | 4 Cyl 1.4L, 4 Cyl 1.8L, 4 Cyl 2.0L Diesel
View related parts
Chevrolet Cruze Knob Assembly, Automatic Transmission Control Lever (W/ Automatic Transmission Conical*Dark Atmospherr
Part Number: 84056195
$75.60 MSRP: $113.00
You Save: $37.40 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: KNOB, Transmission Control Lever; Shift Knob
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Cruze | LS , LS 4 DOOR SEDAN, LT , LT 4 DOOR HATCHBACK, LT 4 DOOR SEDAN, LTZ , LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR SEDAN | 4 Cyl 1.4L, 4 Cyl 1.6L Diesel
View related parts
Chevrolet Cruze Knob Assembly, M/Trns Cont Lvr (W/ Boot & W/ *Jet Black
Part Number: 55506358
$21.50 MSRP: $32.13
You Save: $10.63 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shift Knob
- Replaces: 55492331, 55504688, 55501599
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2019 Chevrolet Cruze | LS , LT , LT 4 DOOR HATCHBACK, LT 4 DOOR SEDAN | 4 Cyl 1.4L, 4 Cyl 1.6L Diesel
View related parts
Chevrolet Cruze Knob Assembly, Automatic Transmission Control Lever
Part Number: 95213029
$44.93 MSRP: $67.17
You Save: $22.24 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: KNOB, Transmission Control Lever; Shift Knob
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chevrolet Cruze | LS 4 DOOR NOTCHBACK, LT / LTZ 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK | 4 Cyl 1.4L, 4 Cyl 1.8L, 4 Cyl 2.0L Diesel
View related parts
Chevrolet Cruze Knob Pkg,Automatic Transmission Control Lever
Part Number: 95483652
$7.16 MSRP: $10.69
You Save: $3.53 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: KNOB PKG, Transmission Control Lever
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chevrolet Cruze | LS 4 DOOR NOTCHBACK, LT / LTZ 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK | 4 Cyl 1.4L, 4 Cyl 1.8L, 4 Cyl 2.0L Diesel
View related parts
Chevrolet Cruze Knob Assembly, Automatic Transmission Control Lever (W/ Automatic Transmission Conical*Black
Part Number: 23333049
$121.40 MSRP: $191.83
You Save: $70.43 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knob Assembly, A/Trns Cont Lvr (W/ A/Trns Cont*Jet Black
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 Chevrolet Cruze | LS 4 DOOR SEDAN, LT 4 DOOR SEDAN, LTZ 4 DOOR SEDAN | 4 Cyl 1.4L, 4 Cyl 1.6L Diesel
View related parts
Chevrolet Cruze Knob Assembly, Automatic Transmission Control Lever (W/ Automatic Transmission Conical*Black
Part Number: 84056194
$149.44 MSRP: $224.38
You Save: $74.94 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: KNOB, Transmission Gear Shift Control; Shift Knob
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2019 Chevrolet Cruze | LS , LS 4 DOOR HATCHBACK, LS 4 DOOR SEDAN, LT , LT 4 DOOR HATCHBACK, LT 4 DOOR SEDAN, LTZ , LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR SEDAN | 4 Cyl 1.4L, 4 Cyl 1.6L Diesel
View related parts
Chevrolet Cruze Knob Assembly, Automatic Transmission Control Lever
Part Number: 95976138
$81.15 MSRP: $121.30
You Save: $40.15 (34%)
Product Specifications
- Other Name: KNOB, Transmission Control Lever; Shift Knob
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chevrolet Cruze | LS 4 DOOR NOTCHBACK, LT / LTZ 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK | 4 Cyl 1.4L, 4 Cyl 1.8L, 4 Cyl 2.0L Diesel

Chevrolet Cruze Shift Knob

Shift Knob in models of Chevrolet Cruze cars enables the driver to move the gear stick conveniently and switch from one gear to another easily. This component is usually illustrated by a shift pattern diagram that can help in the gear shift process and may have more buttons to operate other modes of driving, especially in the automatic transmission. In its production, Chevrolet Cruze has used different types of Shift Knobs, and there are those that are weighted, making it easier to shift gears improving the car's momentum. These weighted Shift Knobs are usually more expensive than basic ones but they prove to be more effective. Chevrolet Cruze Shift Knobs vary from plastics to other advanced metals that can be used as part of luxury cars to serve the needed usefulness and beauty.

Each OEM Chevrolet Cruze Shift Knob we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Cruze Shift Knob Parts Questions & Experts Answers

Knob Assembly, Automatic Transmission Control Lever
95213029
Q: How do you remove the shift knob and disconnect the shift cables on Chevrolet Cruze?
A: To remove the shift knob, use a small screwdriver or trim tool to disengage the shift boot retainers at the front edge, slide the boot forward to disengage the rear retainers, and lift the boot up. Depress the two tabs below the retaining ring on the shift lever while lifting the ring until it is freed. Once loose, depress and lift the reverse lock-out tab at the base of the shifter until disengaged, then remove the shift knob, reverse lockout unit, and boot as an assembly from the shift lever. Separate the shift knob from the reverse lock-out unit by lifting the retaining tab. For the shift cables, disconnect the negative battery cable, remove the floor center console side trim panels and shifter bezel, and lift the shifter boot. Disconnect the rear air outlet duct from the instrument panel, lift the cable-retaining clips at the rear of the shifter assembly, and release the cable ends. Remove the battery and battery tray, then the driver's side knee bolster. Mark each cable end for connection, pop the shift cable ends from the transaxle shift arm, and pull the cables through the firewall grommet. For cable adjustment, lift the cable retaining clips without disconnecting them, release the internal cable, and insert a 5 mm Allen wrench or drill bit through the hole in the shift lever to lock it in place. At the transaxle end, press the block in while pushing the select lever backwards, then secure each cable by snapping the locking tabs down at the rear of the shifter. Remove the Allen wrench or drill bit, push the select lever backwards slightly while pulling the block out, and check for proper shifting of the transaxle. The remaining installation follows the reverse of the removal process.

Browse by Year

2019 Shift Knob 2018 Shift Knob 2017 Shift Knob 2016 Shift Knob 2015 Shift Knob 2014 Shift Knob 2013 Shift Knob 2012 Shift Knob 2011 Shift Knob