How do you properly remove and replace a stabilizer bar,Link and bushings on Chevrolet Corvette?

Loosen the front or rear wheel lug nuts, then raise the vehicle and support it securely on jackstands while applying the parking brake and blocking the opposite wheels to prevent rolling. Remove the wheels, then detach the Sway Bar Link from the bar and lower control arm, ensuring to hold the ballstud with a wrench if it turns with the nut. Unbolt the Sway Bar Bushing brackets and take the Sway Bar Kit out of the vehicle. While the bar is off, slide off the retainer bushings and inspect them for cracks, wear, or deterioration, replacing them if necessary. Clean the bushing area of the Sway Bar Kit with a stiff wire brush to remove rust or dirt. Lubricate the inside and outside of the new bushing with vegetable oil to facilitate reassembly, avoiding petroleum or mineral-based lubricants or brake fluid to prevent deterioration. Finally, reassemble by reversing the removal steps and tightening the fasteners to the specified torque values.

Genuine Chevrolet Corvette Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Sway Bar Links found

View related parts
Chevrolet Corvette Link Assembly, Front Stabilizer Shaft
Part Number: 22945601
$34.16 MSRP: $64.46
You Save: $30.30 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: LINK, Stabilizer Shaft; Link, Stabilizer Link
- Position: Front
- Replaces: 84369505
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2024 Chevrolet Corvette | 2 DOOR, 2 DOOR CONVERTIBLE, LT2 AWD CONVERTIBLE, LT2 AWD COUPE, LT6 CONVERTIBLE, LT6 COUPE, Stingray Convertible, STINGRAY CONVERTIBLE, Stingray Coupe, STINGRAY COUPE, Z06 2 DOOR CONVERTIBLE, Z06 2 DOOR PLAINBACK | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette Link Assembly, Front Stabilizer Shaft
Part Number: 20822934
$33.93 MSRP: $64.01
You Save: $30.08 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: LINK, Stabilizer Shaft; Link, Stabilizer Link
- Position: Front
- Replaces: 10254908, 10351954, 10424745, 10423035, 10435298, 15288535, 15907003, 25932329
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2013 Chevrolet Corvette | 2 DOOR, 2 DOOR SPECIAL, CONVERTIBLE, NOTCHBACK | 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Corvette Link Assembly, Rear Stabilizer Shaft
Part Number: 10052272
Product Specifications
- Other Name: LINK, Stabilizer Shaft; Link, Stabilizer Link
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Link, Front Stabilizer Shaft
Part Number: 10098150
Product Specifications
- Other Name: LINK, Stabilizer Shaft; Link, Stabilizer Link
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Link,Front Stabilizer Shaft
Part Number: 14087645
Product Specifications
- Other Name: LINK, Stabilizer Shaft; Link, Stabilizer Link
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L

Chevrolet Corvette Sway Bar Link

The Sway Bar Link assist in controlling the body roll of Chevrolet Corvette when cornering The Sway Bar Link is an important component for body roll control when cornering in Chevrolet Corvette. Its function is to link the sway bar to the control arm so as to transfer motion from one to the other. It lets the sway bar to create resistance to the inside tire while at the same time compressing the other end and therefore ensures that weight is distributed evenly throughout the vehicle and hence the enhancement of handling ability. In the models of Chevrolet Corvette, many styles of Sway Bar Link have been employed and they were created with performance thought in mind. The primary function remains consistent: for reducing the vertical movement of the car body and, thus, providing better ride comfort. There could be differences in construction, but, as a matter of fact, the Sway Bar Link in Chevrolet Corvette cars' design is aimed at preserving stability and handling during active use.

Each OEM Chevrolet Corvette Sway Bar Link we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Corvette Sway Bar Link Parts Questions & Experts Answers

Link Assembly, Front Stabilizer Shaft
20822934
Q: How do you properly remove and replace a stabilizer bar,Link and bushings on Chevrolet Corvette?
A: Loosen the front or rear wheel lug nuts, then raise the vehicle and support it securely on jackstands while applying the parking brake and blocking the opposite wheels to prevent rolling. Remove the wheels, then detach the Sway Bar Link from the bar and lower Control Arm, ensuring to hold the ballstud with a wrench if it turns with the nut. Unbolt the Sway Bar Bushing brackets and take the Sway Bar Kit out of the vehicle. While the bar is off, slide off the retainer bushings and inspect them for cracks, wear, or deterioration, replacing them if necessary. Clean the bushing area of the Sway Bar Kit with a stiff wire brush to remove rust or dirt. Lubricate the inside and outside of the new bushing with vegetable oil to facilitate reassembly, avoiding petroleum or mineral-based lubricants or brake fluid to prevent deterioration. Finally, reassemble by reversing the removal steps and tightening the fasteners to the specified torque values.