How do you remove and install the hazard flasher switch and Dimmer Switch on Chevrolet Corvette?

For the hazard flasher switch, on 2000 and earlier models, it is part of the multi-function switch, which requires removal of that switch. For 2001 to 2004 models, first remove the upper instrument panel trim, then take out the air duct and center duct section from the instrument panel trim area, depress the plastic clips inward to remove the hazard switch from the upper instrument panel, and disconnect the electrical connector, with installation being the reverse of removal. For 2005 and later models, remove the center console trim panel, press the side tabs of the hazard switch toward the center, and push the switch through, with installation being the reverse of removal. Regarding the fog lamp switch, if it is separate, use a small flat lip screwdriver to pry between the lower edge of the switch and the dash to release the clip, pull the switch toward the driver's seal, disconnect the electrical connector, and reinstall in reverse order. The HUD/instrument panel dimmer switch is part of the instrument panel dimmer switch, requiring removal of the instrument cluster, followed by disconnecting the HUD switch electrical connector and the driver's information center electrical connector, removing the instrument cluster from the instrument panel, taking off the instrument panel bezel, and removing the instrument panel dimmer/HUD switch, with installation being the reverse of removal. For the driver's information switch, first remove the instrument cluster, then take off the instrument cluster bezel, remove the retaining screws for the driver's information switch, take the switch from the back of the bezel, and reinstall in reverse order.

Genuine Chevrolet Corvette Hazard Warning Switch

Hazard Warning Emergency Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Hazard Warning Switches found

View related parts
Chevrolet Corvette Switch Assembly, Hazard Wrng *Black
Part Number: 23392579
$23.82 MSRP: $42.72
You Save: $18.90 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hazard Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2023 Chevrolet Corvette | LT6 CONVERTIBLE, LT6 COUPE, Stingray Convertible, STINGRAY CONVERTIBLE, Stingray Coupe, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette Switch Assembly, Hazard Wrng *Jet Black
Part Number: 84724766
$22.57 MSRP: $35.52
You Save: $12.95 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hazard Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | LT2 AWD CONVERTIBLE, LT2 AWD COUPE, LT6 CONVERTIBLE, LT6 COUPE, Stingray Convertible, STINGRAY CONVERTIBLE, Stingray Coupe, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette SWITCH ASM-HAZARD WRNG *JET BLACK
Part Number: 85536855
$23.37 MSRP: $36.78
You Save: $13.41 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hazard Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024 Chevrolet Corvette | LT2 AWD CONVERTIBLE, LT2 AWD COUPE, LT6 CONVERTIBLE, LT6 COUPE, STINGRAY CONVERTIBLE, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette Button,Hazard Warning Switch
Part Number: 12337876
$1.97 MSRP: $2.95
You Save: $0.98 (34%)
Product Specifications
- Other Name: PUSHBUTTON, Chassis/Body Marker/Hazard; Button, Knob Button
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Knob,Hazard Warning Switch
Part Number: 12337964
Product Specifications
- Other Name: KNOB
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
- 1984-1989 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Switch Assembly, Hazard Warning
Part Number: 10359036
Product Specifications
- Other Name: SWITCH, Chassis/Body Marker/Hazard; Hazard Switch, Switch
- Replaces: 10406626
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Corvette | 2 DOOR, CONVERTIBLE, NOTCHBACK | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Switch Assembly, Fuel Tank Filler Door Lock Release *Black
Part Number: 10276017
Product Specifications
- Other Name: SWITCH, Rear Compartment Lid Release or Ajar; Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Corvette | 2 DOOR, CONVERTIBLE, NOTCHBACK | 8 Cyl 5.7L
View related parts
Chevrolet Corvette SWITCH
Part Number: 10359037
Product Specifications
- Other Name: SWITCH, Chassis/Body Marker/Hazard
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Corvette | 2 DOOR, CONVERTIBLE, NOTCHBACK | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Knob, Hazard Warning Switch *Black
Part Number: 3542859
Product Specifications
- Other Name: KNOB, Chassis/Body Marker/Hazard; Knob
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Pushbutton, Hazard Warning Switch
Part Number: 10325348
Product Specifications
- Other Name: PUSHBUTTON, Chassis/Body Marker/Hazard
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Corvette | 2 DOOR, CONVERTIBLE, NOTCHBACK | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Button, Hazard Warning Switch
Part Number: 3529383
Product Specifications
- Other Name: PUSHBUTTON, Chassis/Body Marker/Hazard; Knob Button
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Switch Assembly, Hazard Warning *Ebony
Part Number: 15142960
Product Specifications
- Other Name: SWITCH, Chassis/Body Marker/Hazard; Hazard Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 2 DOOR, 2 DOOR SPECIAL, CONVERTIBLE | 8 Cyl 6.0L, 8 Cyl 6.2L, 8 Cyl 7.0L

Chevrolet Corvette Hazard Warning Switch

Each OEM Chevrolet Corvette Hazard Warning Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Corvette Hazard Warning Switch Parts Questions & Experts Answers

SWITCH
10359037
Q: How do you remove and install the hazard flasher switch and Dimmer Switch on Chevrolet Corvette?
A: For the hazard flasher switch, on 2000 and earlier models, it is part of the multi-function switch, which requires removal of that switch. For 2001 to 2004 models, first remove the upper instrument panel trim, then take out the air duct and center duct section from the instrument panel trim area, depress the plastic clips inward to remove the hazard switch from the upper instrument panel, and disconnect the electrical connector, with installation being the reverse of removal. For 2005 and later models, remove the center console trim panel, press the side tabs of the hazard switch toward the center, and push the switch through, with installation being the reverse of removal. Regarding the fog lamp switch, if it is separate, use a small flat lip screwdriver to pry between the lower edge of the switch and the dash to release the clip, pull the switch toward the driver's seal, disconnect the electrical connector, and reinstall in reverse order. The HUD/instrument panel dimmer switch is part of the instrument panel dimmer switch, requiring removal of the Instrument Cluster, followed by disconnecting the HUD switch electrical connector and the driver's information center electrical connector, removing the instrument cluster from the instrument panel, taking off the instrument panel bezel, and removing the instrument panel dimmer/HUD switch, with installation being the reverse of removal. For the driver's information switch, first remove the instrument cluster, then take off the instrument cluster bezel, remove the retaining screws for the driver's information switch, take the switch from the back of the bezel, and reinstall in reverse order.

Related Chevrolet Corvette Parts

Browse by Year