The Door Latch Assembly in Chevrolet Colorado vehicles incorporates the role of locking the doors to avoid compromise of access to interior sections of the car. It can have the following type of locking system- This may be automatic locking system or may be manual locking system where the assembly of the doors can be locked and opened through individual locking or through central locking system of the car. Chevrolet Colorado has over the years incorporated different style of Door Latch Assembly, it is strong and easily operated. However, it may be necessary to replace them because of various problems that include problematic outer door handles, sticking mechanisms or door lock button problem.
Each OEM Chevrolet Colorado Door Latch Assembly we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Colorado Door Latch Assembly Parts Questions & Experts Answers
Q: How do you replace the latch,Door Handle and lock cylinder on a door on Chevrolet Colorado?
A: To replace the latch, first raise the window completely and remove the door trim panel along with the rear section of the watershield. Detach the latch rods from the lock cylinder, outside handle, and inside handle, working through the opening in the door. Remove the three Torx-head mounting screws, which may require an impact-type driver to loosen, and then take the latch out of the door. If possible, disconnect the rods while the latch is still in place; otherwise, pull the latch out with the rods attached, then disconnect the rods and electrical connectors. For installation, reverse the removal procedure and ensure the door latches and unlatches properly. To remove the lock cylinder, first take off the outside door handle and disconnect the link. The lock cylinder is secured with either two bolts or a retainer; if it has a retainer, use a screwdriver to push it off. After removing the lock from the door handle, installation follows the reverse of removal. For the outside handle, disconnect the links from the handle and the lock cylinder rod, remove the mounting bolts, and detach the handle from the door. Reposition the handle, attach the link, and install the nut(s), tightening them securely. To remove the inside handle, first take off the door trim panel, then slide the handle rearward to detach it from the holes and remove it from the door, allowing for the disconnection of the two cables. For minor door adjustments regarding latch alignment, loosen the bolts on the latch striker mounted opposite the latch, move the striker slightly as needed, and then retighten the bolts while checking for proper latch operation; the striker can be adjusted up-and-down or left-and-right.