How do you remove the Brake Pad?

To take apart the brake assembly, first remove the cap from the brake fluid reservoir and drain off about two-thirds of the fluid. Next, loosen the front wheel lug nuts, lift up the front part of your car and secure it with jack stands. Inspect wheels and examine brake disc. Take away disc if lathing is needed. Proceed to disassemble inner and outer brake pads plus upper and lower pad retainers from caliper mounting bracket. Replace any cracked or distorted retainers. Apply anti-squeal compound at the back of both pads for setting before installing new brake assembly unit. Mount upper and lower pad retainers followed by inner and outer brake pads. Inspect caliper mounting bolt; use heat resistant breaking grease when lubricating it while replacing its sealing washers at inlet fitting of its braking hose. For reinstallation, tighten caliper mounting bolts as well as wheel lug nuts using specified torque values. Once done, depress the brake pedal several times until the linings contact with disc surface are made known through feel on stop pedal travel distance. Check that there is enough material in reservoir-Top up level if necessary. Finally try out brakes cautiously prior to putting vehicle back into operation mode again.

Genuine Chevrolet Colorado Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Pads found

View related parts
Chevrolet Colorado Pad Kit, Rear Disc Brk
Part Number: 84217719
$124.14 MSRP: $240.30
You Save: $116.16 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Pads, Rear Pads
- Position: Rear
- Replaces: 23387164, 94778650
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Chevrolet Colorado | CREW CAB - 5'2" BOX, CREW CAB - 6'2" BOX, CREW CAB LS - 6'2" BOX, CREW CAB LT - 6'2" BOX, EXTENDED CAB - 6'2" BOX, LS CREW CAB - 5'2" BOX, LS EXTENDED CAB - 6'2" BOX, LT CREW CAB - 5'2" BOX, LT EXTENDED CAB - 6'2" BOX | 4 Cyl 2.5L, 4 Cyl 2.8L Diesel, 6 Cyl 3.6L
View related parts
Chevrolet Colorado Pad Kit, Front Disc Brk
Part Number: 84217715
$106.06 MSRP: $210.44
You Save: $104.38 (50%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Pads, Front Pads
- Position: Front
- Replaces: 23292538, 94775726
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Chevrolet Colorado | CREW CAB - 5'2" BOX, CREW CAB - 6'2" BOX, CREW CAB LS - 6'2" BOX, CREW CAB LT - 6'2" BOX, EXTENDED CAB - 6'2" BOX, LS CREW CAB - 5'2" BOX, LS EXTENDED CAB - 6'2" BOX, LT CREW CAB - 5'2" BOX, LT EXTENDED CAB - 6'2" BOX | 4 Cyl 2.5L, 4 Cyl 2.8L Diesel, 6 Cyl 3.6L
View related parts
Chevrolet Colorado Pad Kit,Front Disc Brake
Part Number: 19178358
$112.83 MSRP: $223.86
You Save: $111.03 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PAD KIT, Brake; Brake Pads, Front Pads
- Position: Front
- Replaces: 88965681
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | CREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP | 4 Cyl 2.9L, 5 Cyl 3.7L, 8 Cyl 5.3L
View related parts
Chevrolet Colorado Pad Kit, Front Disc Brk
Part Number: 84873425
$86.40 MSRP: $171.42
You Save: $85.02 (50%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Pads, Front Pads
- Position: Front
- Replaced by: 86822980
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Chevrolet Colorado | CREW CAB - 5'2" BOX, CREW CAB - 6'2" BOX, CREW CAB LS - 6'2" BOX, CREW CAB LT - 6'2" BOX, EXTENDED CAB - 6'2" BOX, LS CREW CAB - 5'2" BOX, LS EXTENDED CAB - 6'2" BOX, LT CREW CAB - 5'2" BOX, LT EXTENDED CAB - 6'2" BOX | 4 Cyl 2.5L, 4 Cyl 2.8L Diesel, 6 Cyl 3.6L
View related parts
Chevrolet Colorado Pad Kit, Rear Disc Brk
Part Number: 84873431
$50.02 MSRP: $141.80
You Save: $91.78 (65%)
ADD TO CART
Product Specifications
- Other Name: Brake Pads, Rear Pads
- Position: Rear
- Replaced by: 86803800
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Chevrolet Colorado | CREW CAB - 5'2" BOX, CREW CAB - 6'2" BOX, CREW CAB LS - 6'2" BOX, CREW CAB LT - 6'2" BOX, EXTENDED CAB - 6'2" BOX, LS CREW CAB - 5'2" BOX, LS EXTENDED CAB - 6'2" BOX, LT CREW CAB - 5'2" BOX, LT EXTENDED CAB - 6'2" BOX | 4 Cyl 2.5L, 4 Cyl 2.8L Diesel, 6 Cyl 3.6L
View related parts
Chevrolet Colorado PAD KIT,FRT DISC BRK
Part Number: 19332216
$118.84 MSRP: $224.22
You Save: $105.38 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | CREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP | 4 Cyl 2.9L, 5 Cyl 3.7L, 8 Cyl 5.3L
View related parts
Chevrolet Colorado Pad Kit,Front Disc Brake
Part Number: 89040317
Product Specifications
- Other Name: PAD KIT, Brake; Brake Pads, Front Pads
- Position: Front
- Replaces: 89040316
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Colorado | CREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP | 4 Cyl 2.8L, 4 Cyl 2.9L, 5 Cyl 3.5L, 5 Cyl 3.7L

Chevrolet Colorado Brake Pad Parts Questions & Experts Answers

Pad Kit,Front Disc Brake
19178358
Q: How do you remove the Brake Pad?
A: To take apart the brake assembly, first remove the cap from the brake fluid reservoir and drain off about two-thirds of the fluid. Next, loosen the front wheel lug nuts, lift up the front part of your car and secure it with jack stands. Inspect wheels and examine Brake Disc. Take away disc if lathing is needed. Proceed to disassemble inner and outer brake pads plus upper and lower pad retainers from caliper mounting bracket. Replace any cracked or distorted retainers. Apply anti-squeal compound at the back of both pads for setting before installing new brake assembly unit. Mount upper and lower pad retainers followed by inner and outer brake pads. Inspect caliper mounting bolt; use heat resistant breaking grease when lubricating it while replacing its sealing washers at inlet fitting of its braking hose. For reinstallation, tighten caliper mounting bolts as well as wheel lug nuts using specified torque values. Once done, depress the brake pedal several times until the linings contact with disc surface are made known through feel on stop pedal travel distance. Check that there is enough material in reservoir-Top up level if necessary. Finally try out brakes cautiously prior to putting vehicle back into operation mode again.