How do you inspect and replace control arm balljoints on Chevrolet Colorado?

Inspect the control arm balljoints for looseness whenever either is separated by attempting to turn the ballstud in its socket with your fingers; if loose, replace the balljoint. To check the lower balljoints with the suspension assembled, first loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands under the frame rails before removing the wheels. Clean the balljoints and inspect the seals for cuts and tears; if a seal is damaged, replace the balljoint. Assess the balljoints for wear by moving each control arm up and down in relation to the steering knuckle with a prybar to ensure there is no play; replace any balljoint that exhibits significant play. For replacement, remove both upper and lower balljoints by following the procedure for control arm removal without taking out the control arm mounting bolts. Separate the balljoint from the steering knuckle and remove the bolts securing the balljoint to the control arm. Install the new balljoint, tightening the bolts to the specified torque, and ensure to use new bolts and nuts. Complete the installation by reversing the removal procedure and have the front end alignment checked and adjusted if necessary.

Genuine Chevrolet Colorado Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ball Joints found

View related parts
Chevrolet Colorado Joint Kit,Front Upper Control Arm Ball
Part Number: 89040241
$89.02 MSRP: $147.34
You Save: $58.32 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: JOINT KIT, Steering Knuckle Upper Control Arm; Upper Ball Joint
- Position: Front Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Colorado | CREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP | 4 Cyl 2.8L, 4 Cyl 2.9L, 5 Cyl 3.5L, 5 Cyl 3.7L, 8 Cyl 5.3L
View related parts
Chevrolet Colorado Joint Kit,Front Upper Control Arm Ball
Part Number: 89040242
$175.00 MSRP: $245.61
You Save: $70.61 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: JOINT KIT, Steering Knuckle Upper Control Arm; Upper Ball Joint
- Position: Front Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Colorado | CREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP | 4 Cyl 2.8L, 4 Cyl 2.9L, 5 Cyl 3.5L, 5 Cyl 3.7L, 8 Cyl 5.3L
View related parts
Chevrolet Colorado Joint Kit,Front Lower Control Arm Ball
Part Number: 89040240
Product Specifications
- Other Name: JOINT KIT, Steering Knuckle Lower Control Arm Pivot; Lower Ball Joint
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Colorado | CREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP | 4 Cyl 2.8L, 4 Cyl 2.9L, 5 Cyl 3.5L, 5 Cyl 3.7L, 8 Cyl 5.3L

Chevrolet Colorado Ball Joint

The Ball Joint is used in Chevrolet Colorado automobiles where it links the control arms to the steering knuckles thus forming part of the suspension system. This connection enables the pivoting movement so as to give the car a good ride and as well as the control over the car. Popular Chevrolet Colorado models may come with using upper and lower ball joints, and depending on the suspension type that could be SLC or short long arm or even double wishbone. Manufactured from steel and encapsulate in a rubber-like boot, the Chevrolet Colorado Ball Joint minimizes the amount of dirt that can enter the joint whilst also enhancing the lubrication process. Today's ball joints are most often made as 'sealed-for-life,' meaning they will require less maintenance than earlier models which used greasing. Although they normally serve between 80, 000 to 100,000 miles, the wear indicative of signs such as weird sounds and unbalanced tire usage make it essential to check for healthy usage for safety while driving.

Each OEM Chevrolet Colorado Ball Joint we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Colorado Ball Joint Parts Questions & Experts Answers

Joint Kit,Front Upper Control Arm Ball
89040241
Q: How do you inspect and replace control arm balljoints on Chevrolet Colorado?
A: Inspect the Control Arm balljoints for looseness whenever either is separated by attempting to turn the ballstud in its socket with your fingers; if loose, replace the balljoint. To check the lower balljoints with the suspension assembled, first loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands under the frame rails before removing the wheels. Clean the balljoints and inspect the seals for cuts and tears; if a seal is damaged, replace the balljoint. Assess the balljoints for wear by moving each control arm up and down in relation to the Steering Knuckle with a prybar to ensure there is no play; replace any balljoint that exhibits significant play. For replacement, remove both upper and lower balljoints by following the procedure for control arm removal without taking out the control arm mounting bolts. Separate the balljoint from the steering knuckle and remove the bolts securing the balljoint to the control arm. Install the new balljoint, tightening the bolts to the specified torque, and ensure to use new bolts and nuts. Complete the installation by reversing the removal procedure and have the front end alignment checked and adjusted if necessary.