My Garage
My Account
Cart
Genuine Chevrolet Cobalt Headlight
Headlamp- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Headlights found
Chevrolet Cobalt Capsule/Headlamp/Fog Lamp Headlamp
Part Number: 20964009$234.99 MSRP: $334.82You Save: $99.83 (30%)Ships in 1-3 Business Days
Chevrolet Cobalt Capsule/Headlamp/Fog Lamp Headlamp
Part Number: 22740620$192.47 MSRP: $289.06You Save: $96.59 (34%)Ships in 1-3 Business Days
Chevrolet Cobalt Capsule/Headlamp/Fog Lamp Headlamp
Part Number: 22740621$192.47 MSRP: $289.06You Save: $96.59 (34%)Ships in 1-3 Business Days
Chevrolet Cobalt Capsule/Headlamp/Fog Lamp Headlamp
Part Number: 20964008$271.15 MSRP: $386.33You Save: $115.18 (30%)Ships in 1-3 Business Days
Chevrolet Cobalt Headlight Parts Questions & Experts Answers
- Q: How do you adjustment the headlight on a Chevrolet Cobalt,HHR and Saturn ION?A: The adjustment procedure for headlights on Cobalt/GS and ION models involves locating the vertical adjustment screws behind each headlight housing, while on HHR models, the vertical adjustment screw is found under the inner fender flange. There are no horizontal adjustment screws. To adjust the headlights, one method involves using masking tape, a blank wall, and a level floor. The tape is positioned vertically on the wall in reference to the vehicle centerline and the centerlines of both headlights, and a horizontal tape line is positioned in reference to the centerline of all the headlights. The vehicle should be parked 25 feet from the wall, sitting level, with the gas tank half-full and no heavy load in the vehicle. Starting with the low beam adjustment, the high intensity zone should be positioned two inches below the horizontal line, and adjustment is made by turning the adjusting screw. With the high beams on, the high intensity zone should be vertically centered with the exact center just below the horizontal line. It is important to note that it may not be possible to position the headlight aim exactly for both high and low beams, and if a compromise must be made, prioritizing the proper aim of the low beams is recommended for safety. It is advised to have the headlights adjusted by a dealer service department or service station as soon as possible.
- Q: How do you remove the left headlight housing on Chevrolet Cobalt,HHR and Saturn ION?A: To take out the headlight housing on a Cobalt, first pull out the bumper cover pushpin located near the headlight's inner part. Next, get rid of two bolts holding the headlight housing. Pull forward the headlight housing and then unplug all electrical connectors. On ION models, remove two pins retaining the headlight housing and then disconnect electrical connectors. For HHR models, take off front bumper cover as well as other bolts that keep the headlight housing in place. Continue to lower down until its locking tabs at back are free of those resistance points. Next pull it forward until all locking pins come out and you can detach bulb wires from their connectors. In all cases, installing is opposite of removal. Last of all do remember to adjust your headlights when finished with them.
