How do you remove the CKP sensor?

To remove the CKP sensor, start by turning the ignition key to OFF. Then, raise the vehicle and secure it on jackstands. Next, remove the starter motor and disconnect the electrical connector from the CKP sensor. Unscrew the CKP sensor mounting bolt and remove the sensor. If you plan to reuse the old CKP sensor, make sure to remove the old O-ring and discard it. When installing the CKP sensor, always use a new O-ring and tighten the mounting bolt securely.

Genuine Chevrolet Cobalt Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
Chevrolet Cobalt Sensor,Crankshaft Position
Part Number: 12567712
$41.61 MSRP: $86.40
You Save: $44.79 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Replaces: 1103703, 10456295, 24576398
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Cobalt | 2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR | 4 Cyl 2.2L
View related parts
Chevrolet Cobalt Sensor Assembly, Crankshaft Position
Part Number: 12674703
$32.31 MSRP: $60.96
You Save: $28.65 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Cr/Shf Posn
- Replaces: 12588992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chevrolet Cobalt | 2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 4 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L
View related parts
Chevrolet Cobalt Sensor
Part Number: 12789959
$28.63 MSRP: $54.03
You Save: $25.40 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Cobalt | LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR | 4 Cyl 2.0L

Chevrolet Cobalt Crankshaft Position Sensor

The Crankshaft Position Sensor in Chevrolet Cobalt automobiles is used as one of the important electronic devices that is responsible for the indication of an engine phase and dispatches impulses to the management system of the engine. This sensor has the major function of managing the fuelling pattern, ignition sequence, and other characteristics of the engine. Usually installed on the major crank Idler pulley, flywheel, camshaft, or crankshaft, the flywheel speed sensor can be of the following types: Inductive, Hall Effect, magnetoresistive, or optical. Crankshaft Position Sensor is an important component of the car that helps in its starting as well as proper functioning of the engine; thus, its failure can lead to several problems.

Each OEM Chevrolet Cobalt Crankshaft Position Sensor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Cobalt Crankshaft Position Sensor Parts Questions & Experts Answers

Sensor,Crankshaft Position
12567712
Q: How do you remove the CKP sensor?
A: To remove the CKP sensor, start by turning the ignition key to OFF. Then, raise the vehicle and secure it on jackstands. Next, remove the starter motor and disconnect the electrical connector from the CKP sensor. Unscrew the CKP sensor mounting bolt and remove the sensor. If you plan to reuse the old CKP sensor, make sure to remove the old O-ring and discard it. When installing the CKP sensor, always use a new O-ring and tighten the mounting bolt securely.