How do you remove the release cylinder on Chevrolet Cobalt?

To remove the clutch slave cylinder, start by disconnecting the quick-connect hydraulic line fitting. Then, remove the transaxle and the fasteners securing the clutch slave cylinder to the transaxle. Slide the clutch slave cylinder assembly off the transaxle input shaft. For installation, lubricate the inside diameter of the bearing with high-temperature grease. Apply a thread-locking compound to the clutch slave cylinder mounting fasteners and tighten them to the specified torque. Install the transaxle and connect the hydraulic fitting. Check the fluid level in the brake fluid reservoir and add brake fluid conforming to DOT 3 specifications if needed. Finally, bleed the system.

Genuine Chevrolet Cobalt Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Clutch Slave Cylinders found

View related parts
Chevrolet Cobalt Cylinder Asm,Clutch Actuator
Part Number: 24242805
$108.38 MSRP: $170.53
You Save: $62.15 (37%)
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Clutch Hydraulic Release Slave/Actuator; Slave Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 4 DOOR | 4 Cyl 2.0L
View related parts
Chevrolet Cobalt Cylinder Assembly, Clutch Actuator
Part Number: 12582666
$103.25 MSRP: $162.44
You Save: $59.19 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Clutch Hydraulic Release Slave/Actuator; Slave Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | 2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 4 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L
View related parts
Chevrolet Cobalt Cylinder Assembly, Clutch Actuator
Part Number: 12583857
$113.06 MSRP: $178.72
You Save: $65.66 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Clutch Hydraulic Release Slave/Actuator; Actuator, Slave Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Cobalt | LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR | 4 Cyl 2.0L

Chevrolet Cobalt Clutch Slave Cylinder

The Clutch Slave Cylinder of Chevrolet Cobalt cars is section that is related to the movement of the Clutch Master Cylinder in unlocking the clutch when the pedal is depressed to facilitate gear change. This hydraulic element gets pressure from the master cylinder, which, through a piston, comes out to extend a rod that disengages the clutch system. Any problem associated with the clutch slave cylinder affects the gear shifting making the replacement vital for the car to be manageable and safe to drive. The Cobalt's clutch system master cylinder applies force to set hydraulic pressure and operates the slave cylinder to control the proper functioning of the clutch and gear shift. It is especially important to take an vehicle for service and repair as often as possible to avoid major issues and risks to safety and performance.

Each OEM Chevrolet Cobalt Clutch Slave Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Cobalt Clutch Slave Cylinder Parts Questions & Experts Answers

Cylinder Assembly, Clutch Actuator
12582666
Q: How do you remove the release cylinder on Chevrolet Cobalt?
A: To remove the clutch slave cylinder, start by disconnecting the quick-connect hydraulic line fitting. Then, remove the transaxle and the fasteners securing the clutch slave cylinder to the transaxle. Slide the clutch slave cylinder assembly off the transaxle input shaft. For installation, lubricate the inside diameter of the bearing with high-temperature grease. Apply a thread-locking compound to the clutch slave cylinder mounting fasteners and tighten them to the specified torque. Install the transaxle and connect the hydraulic fitting. Check the fluid level in the brake fluid reservoir and add brake fluid conforming to DOT 3 specifications if needed. Finally, bleed the system.