My Garage
My Account
Cart
Genuine Chevrolet Caprice Sway Bar Kit
Stabilizer Sway Bar Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Sway Bar Kits found
Chevrolet Caprice Sway Bar Kit
The Sway Bar Kit in Chevrolet Caprice cars comes with the additional duty of improving the handling ability of the car through reducing on body roll on a cornering or when driving over irregular surfaces. This anti-roll bar links opposite wheels with the help of a torsion spring and hence will increase the roll stiffness without having any impact on the vertical stiffness of spring. That means that by making the wheels remain close to the same height, the Chevrolet Caprice Sway Bar Kit actually lessens sideways tilt and thus increases the vehicle's traction on the road. An examined style of the Sway Bar Kit has been installed on the Chevrolet Caprice points from the year 1987 to nearly the early part of the 2000s and came in different forms, the adjustable and active Sway Bar Kit. Such piston designs make it possible to achieve varying levels of stiffness, which controls handing traits and structural stability. While in the past Sway Bar Kits could transmit pulses from one wheel to the other causing the vehicle to waddle on rough surfaces, new implementations may increase ride quality in the Chevrolet Caprice, as well as ride responsiveness.
Each OEM Chevrolet Caprice Sway Bar Kit we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Caprice Sway Bar Kit Parts Questions & Experts Answers
- Q: How do you replace the front and rear stabilizer bars on Chevrolet Caprice?A: Thus to get to the front Sway Bar Kit, one has to jack up the front part of the vehicle and disconnect it from the lower Control Arm. Further, unbolt the Sway Bar Kit brackets from the frame and elevate the Sway Bar Kit out of the way. Remove the link bolts, spacers and rubber grommets from the lower control arms or the Sway Bar Kit and check the general condition of every fastener as well as deterioration; replace any strained or worn accessory. If new frame bushings are required, then should be placed with the slit towards the front of the car. When fitting, slide the brackets over the bushings and secure them on the frame without tightness to allow the Sway Bar Kit to be correctly positioned in the midline; thereafter, tighten the bolts to the appropriate torque. Together with the adjustment, lower the vehicle to the ground to the following settings: At the rear Sway Bar Kit, lift the rear end of the vehicle and rear axle to support; you have to remove the balcony to spring retainer bar and the Sway Bar Kit to the body bolt to disassembly. Insert the bushings on the Sway Bar Kit and align it in place; tighten the remaining upper retaining bolts as well as the Sway Bar Kit to spring connection. Make sure the rear axle carries the weight of the vehicle only and then tighten the bolts to the recommended torque and then lowered the vehicle.
