How to remove, install, and prime a power steering pump on Chevrolet Caprice?

Remove the hydraulic hoses either from the pump or the steering gear and suspend them in the raised position to avoid loss of fluid prior to plugging. To do this loosen the two black nuts on the sides and the green nut of pump mounts; this should push the pump towards the engine releasing the belt. Remove the screws and nuts of the pump mounting and the braces, and then withdraw the pump. In order to replace the pump pulley, a special extractor will probably be required and the exact type of extractor will depend upon the actual pulley; check with your dealer if necessary. This involves the reverse process of that of removal, and care has to be taken to tighten the hose unions to the recommended torque, before charging the fluid reservoir. To apply prime, rotate the pulley in the opposite direction to normal for as long of time until no more bubbles will rise from the fluid, after this look through the reservoir filler cap. Last, there is the drive belt which should be properly fitted and then the belt should be tensioned before the system is bled.

Genuine Chevrolet Caprice Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Power Steering Pumps found

View related parts
Chevrolet Caprice Pump Assembly, P/S
Part Number: 7839787
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1990 Chevrolet Caprice | 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet Caprice PUMP, Power Steering
Part Number: 7843087
Product Specifications
- Other Name: Power Steering Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1990 Chevrolet Caprice | 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet Caprice Pump Assembly, P/S
Part Number: 26016588
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Chevrolet Caprice | 4 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Pump Assembly, P/S
Part Number: 26004122
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1990 Chevrolet Caprice | 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet Caprice Pump Assembly, P/S
Part Number: 26016582
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Caprice | 4 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Pump Assembly, P/S
Part Number: 26055706
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Caprice | CLASSIC 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR | 8 Cyl 4.3L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Pump Assembly, P/S
Part Number: 7840244
Product Specifications
- Other Name: PUMP, Power Steering; Power Steering Pump, Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1990 Chevrolet Caprice | 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel

Chevrolet Caprice Power Steering Pump

I have discovered that Power Steering Pump in Chevrolet Caprice is vital in transforming energy of the engine to hydraulic energy that helps in its ease of steering. This pump works in such a way as to produce fluid pressure that helps the driver to control the movement of the vehicle especially when in slow motion or even stalled. There is usually a v-belt or serpentine belt that turns the pump which usually lies underneath the engine with a variety of reservoirs that can be incorporated into the system or distinct. Chevrolet Caprice over the years has used different types of pumps on their steering system with most of them using hydraulic types as they act as a link between the steering wheel and the wheels. However, there can be strand hydraulic power system in certain models with electric power assist that varies assist that depends on the vehicle speed. Some problems associated with Chevrolet Caprice Power Steering Pump include: leakages, noise and fluctuating power steering assistance hence needs frequent checking and replacement in the event that it hampers with the normal functioning.

Each OEM Chevrolet Caprice Power Steering Pump we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Caprice Power Steering Pump Parts Questions & Experts Answers

Pump Assembly, P/S
7839787
Q: How to remove, install, and prime a power steering pump on Chevrolet Caprice?
A: Remove the hydraulic hoses either from the pump or the steering gear and suspend them in the raised position to avoid loss of fluid prior to plugging. To do this loosen the two black nuts on the sides and the green nut of pump mounts; this should push the pump towards the engine releasing the belt. Remove the screws and nuts of the pump mounting and the braces, and then withdraw the pump. In order to replace the pump pulley, a special extractor will probably be required and the exact type of extractor will depend upon the actual pulley; check with your dealer if necessary. This involves the reverse process of that of removal, and care has to be taken to tighten the hose unions to the recommended torque, before charging the fluid reservoir. To apply prime, rotate the pulley in the opposite direction to normal for as long of time until no more bubbles will rise from the fluid, after this look through the reservoir filler cap. Last, there is the drive belt which should be properly fitted and then the belt should be tensioned before the system is bled.