Other Name: VALVE, Fuel Tank Evaporator/Purge Control; Pressure Valve, Purge Solenoid, Valve, Vapor Valve
Replaces: 17087178
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1990 Chevrolet Caprice | 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
Chevrolet Caprice Canister Purge Valves
Each OEM Chevrolet Caprice Canister Purge Valves we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Caprice Canister Purge Valves Parts Questions & Experts Answers
Q: What is the purpose of the Canister Purge Valves and Vapor Canister and how can it be checked for issues on Chevrolet Caprice?
A: The evaporation control system is a basic and trouble-free part of the emissions network that reduces hydrocarbon emissions. It is a closed fuel system that redirects wasted fuel back to the gas tank and stores fuel vapors instead of releasing them into the atmosphere. The system requires little maintenance, but if there are issues, it should be inspected. To check the system, disconnect the fuel tank line at the charcoal canister, located behind the left headlight in the engine compartment. Check for liquid fuel in the line, which indicates a problem with the vent controls or gas cap. Apply 15 psi pressure to the fuel vapor line and look for excessive pressure loss. Check for fuel vapor smell in the engine compartment and around the gas tank. Remove the fuel filler cap and check for pressure in the gas tank. If there is a large pressure loss or fuel odor, inspect all lines for leaks or deterioration. To check the purge valve in the canister, start the engine, disconnect the vacuum signal line, and raise the engine speed to 1500 rpm to check for vacuum. If there is no vacuum, check the EGR operation. The purge line to the canister functions with the PCV vacuum source, so if there is no vacuum when the hose is disconnected, check the PCV valve vacuum. The charcoal canister and filter should be replaced at recommended intervals.