How should hydraulic brake lines be periodically examined and maintained on Chevrolet Caprice?

Periodically examine all hydraulic brake lines, both rigid and flexible, for rusting, chafing, and general deterioration, while also checking the security of the connections. If hoses or lines must be disconnected, extensive loss of fluid can be avoided by taping over the vent holes in the master cylinder fluid reservoir cap first. For drum brakes, use a back-up wrench on the hose fitting to unscrew the connector, remove the U-shaped retainer, withdraw the hose fitting from the support bracket, turn it out of the wheel cylinder, and remove the copper gasket. When installing, use a new copper gasket, moisten the screw threads with brake fluid, and torque-tighten to the wheel cylinder. With the weight on the suspension and the wheels straight ahead, insert the female end of the hose through the support bracket, allow it to seek its own position without kinking, then install the U-shaped retainer and secure the hose in the bracket. Turn the wheels from lock-to-lock to ensure that the hose does not contact other parts, repositioning the female end if necessary. Place the tubular steel connector in the hose fitting and torque tighten using a back-up wrench. After removing the tape from the master cylinder reservoir, top up with new brake fluid and bleed the system. For disc brakes, to disconnect a rigid line from a flexible hose, unscrew the connector from the hose end fitting located at the support brackets, holding the flexible hose and fitting still with an open-ended wrench. To remove the flexible hose, extract the retainer and pull the hose from the support bracket, then remove the hose to caliper bolt, the center connector, and the hose. Installation is a reversal of removal, always using new copper gaskets with the flexible hose end fittings and allowing the flexible hose to assume its natural curvature without securing it in a twisted or kinked position. Rigid lines that need replacement can be purchased at many auto parts stores; take the old line for a pattern, ensuring they are fitted with the correct connectors and that the ends are double-flared.

Genuine Chevrolet Caprice Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Brake Lines found

View related parts
Chevrolet Caprice Pipe,Brake (Bulk Tubing 5/16" 8Mm)
Part Number: 12541500
$40.53 MSRP: $63.76
You Save: $23.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Standard Parts; Cooler Line, Line, Oil Cooler Tube
- Replaces: 01324714, 1324714
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1996 Chevrolet Caprice | 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Hose Asm,Front Brake
Part Number: 19173093
$12.84 MSRP: $23.03
You Save: $10.19 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: HOSE, Hydraulic Brake; Brake Hose, Flex Hose, Hose
- Position: Front
- Replaces: 17999356, 18031819, 22113483
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1990 Chevrolet Caprice | 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Hose Asm,Rear Brake
Part Number: 19173041
$13.59 MSRP: $24.38
You Save: $10.79 (45%)
ADD TO CART
Product Specifications
- Other Name: HOSE, Hydraulic Brake; Brake Hose, Hose
- Position: Rear
- Replaces: 09757655, 18031766, 9757655
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1990 Chevrolet Caprice | 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Pipe Assembly, Front Brake Combination Valve
Part Number: 25509449
$28.70
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1990 Chevrolet Caprice | 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet Caprice Pipe Assembly, Rear Brake Combination Valve
Part Number: 25511005
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1990 Chevrolet Caprice | 4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet Caprice Pipe Assembly, Rear Brake Combination Valve
Part Number: 3523167
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet Caprice | 4 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Pipe Assembly, Front Brake Combination Valve
Part Number: 3523168
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet Caprice | 4 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Hose Assembly, Rear Brake
Part Number: 17999643
Product Specifications
- Other Name: HOSE, Hydraulic Brake; Flex Hose
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Caprice | CLASSIC 4 DOOR, LS 4 DOOR | 8 Cyl 4.3L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Hose Assembly, Rear Brake
Part Number: 17999642
Product Specifications
- Other Name: HOSE, Hydraulic Brake; Flex Hose
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Caprice | CLASSIC 4 DOOR, LS 4 DOOR | 8 Cyl 4.3L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Hose,Rear Brake
Part Number: 22111977
Product Specifications
- Other Name: HOSE, Hydraulic Brake; Brake Hose, Flex Hose
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet Caprice | 4 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Caprice Hose,Front Brake
Part Number: 22111976
Product Specifications
- Other Name: HOSE, Hydraulic Brake; Brake Hose, Flex Hose, Hose
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet Caprice | 4 DOOR, CLASSIC 4 DOOR, CLASSIC LS 4 DOOR, CLASSIC STATION WAGON, LS 4 DOOR, STATION WAGON | 6 Cyl 4.3L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L

Chevrolet Caprice Brake Line

The Brake Line in Chevrolet Caprice cars plays the key role of supplying brake fluid from the master cylinder to the brake caliper pistons so that the hydraulic brakes work properly. This system is very important for making the vehicle to stop of slow down when the brake pedal is pressed. There has been the use of metal brake line and the rubber brake hose in Chevrolet Caprice models of the past years. Metal lines tend to corrode quickly especially if they are exposed to freezing conditions during the winter and rubber hoses on the other hand may crack due to wear and tear, bad installation among other things. For better braking, stainless steel Braided Brake Lines are other upgrades that are recommended to improve on the feel of the brake pedal and the sensitivity especially in spirited driving. Prebent brake line kits and direct replacement hoses are offered to make installation and maintenance less complicated.

Each OEM Chevrolet Caprice Brake Line we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Caprice Brake Line Parts Questions & Experts Answers

Pipe,Brake (Bulk Tubing 5/16" 8Mm)
12541500
Q: How should hydraulic brake lines be periodically examined and maintained on Chevrolet Caprice?
A: Periodically examine all hydraulic brake lines, both rigid and flexible, for rusting, chafing, and general deterioration, while also checking the security of the connections. If hoses or lines must be disconnected, extensive loss of fluid can be avoided by taping over the vent holes in the master cylinder fluid reservoir cap first. For drum brakes, use a back-up wrench on the hose fitting to unscrew the connector, remove the U-shaped retainer, withdraw the hose fitting from the support bracket, turn it out of the Wheel Cylinder, and remove the copper gasket. When installing, use a new copper gasket, moisten the screw threads with brake fluid, and torque-tighten to the wheel cylinder. With the weight on the suspension and the wheels straight ahead, insert the female end of the hose through the support bracket, allow it to seek its own position without kinking, then install the U-shaped retainer and secure the hose in the bracket. Turn the wheels from lock-to-lock to ensure that the hose does not contact other parts, repositioning the female end if necessary. Place the tubular steel connector in the hose fitting and torque tighten using a back-up wrench. After removing the tape from the master cylinder reservoir, top up with new brake fluid and bleed the system. For disc brakes, to disconnect a rigid line from a flexible hose, unscrew the connector from the hose end fitting located at the support brackets, holding the flexible hose and fitting still with an open-ended wrench. To remove the flexible hose, extract the retainer and pull the hose from the support bracket, then remove the hose to caliper bolt, the center connector, and the hose. Installation is a reversal of removal, always using new copper gaskets with the flexible hose end fittings and allowing the flexible hose to assume its natural curvature without securing it in a twisted or kinked position. Rigid lines that need replacement can be purchased at many auto parts stores; take the old line for a pattern, ensuring they are fitted with the correct connectors and that the ends are double-flared.