My Garage
My Account
Cart
Genuine Chevrolet Camaro Intercooler
Front Intercooler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Intercoolers found
Chevrolet Camaro Cooler Assembly, Charging Air
Part Number: 12622238$649.89 MSRP: $1031.83You Save: $381.94 (38%)
Chevrolet Camaro Intercooler
The Intercooler in Chevrolet Camaro vehicles is crucial in adding perfection to the engine power output especially in cases of Car models that incorporate turbo chargers or super chargers as part of their hardware. This is mainly used as a cooler where the compressed air is cooled before it enters the combustion chamber so as to avoid pre-ignition and also because a denser air is admitted into the cylinder. This process on one hand allows the engine to inject more fuel thus enhancing the power to be produced. Intercoolers can be air to air or air to liquid and Chevrolet Camaro may include both intercoolers' systems. Air-to-air intercoolers are lighter and cools the air directly by expelling it to the atmosphere whereas, air-to-liquid intercoolers uses a kind of fluid for cooling hence could be heavier due to the additional parts. While selecting the intercooler types, some may add to the net weight of the vehicle while others may enhance the cooling capacity thus making it a performance factor. In balance, the Intercooler is instrumental in the conditioning of forced induction systems of the Chevrolet Camaro.
Each OEM Chevrolet Camaro Intercooler we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Camaro Intercooler Parts Questions & Experts Answers
- Q: How do you disconnect and remove the charge air cooler in V8 engine on Chevrolet Camaro?A: Disconnect the cable from the negative battery terminal, then remove the cross brace. Lift each side of the engine cover up and off the ball studs, and remove it from the vehicle. Raise the vehicle and support it securely on jackstands, then remove the splash shield, bumper cover, and radiator inlet duct. Place a drain pan under the intercooler and loosen the intercooler radiator drain plug located at the lower left corner of the intercooler radiator. Locate the quick-connect fittings for the intercooler hoses, remove the retaining clips, and separate the hoses from the fittings. Disconnect the PCV fresh air tube and dirty air tube, as well as the electrical connectors from the supercharger air inlet and outlet pressure sensors, the intake Air Temperature sensor, and the barometric pressure sensor. Remove the intercooler cover bolts, using a 1/4 inch-drive extension and flex-socket for the rear bolts if necessary, then remove the cover and gasket, taking care to cover the opening to prevent dirt from contaminating the rotors. Do not reuse the intercooler cover gaskets. Remove the intercooler outlet fasteners and slide the outlet out from the cover and cooler. Turn the intercooler cover upside down, remove the intercooler mounting bolts, and take the cooler off the cover. Replace the outlet-to-cooler O-rings with new ones. Ensure the mating surfaces of the intercooler cover and supercharger are perfectly clean before installing the intercooler cover, using brake system cleaner for this purpose. Install the intercooler with new O-rings to the cover and tighten the bolts to the specified torque. Attach the intercooler outlet to the intercooler fittings, ensuring the O-rings are not damaged, and tighten the outlet-to-cover bolts to the specified torque. Remove any rag or tape used to cover the supercharger opening and install the gasket, followed by a new intercooler cover gasket to the cover. Install the intercooler cover and bolts, tightening them in sequence to the specified torque, then install and tighten the intercooler radiator drain plug. Refill and bleed the intercooler system, and complete the installation in reverse order of removal, ensuring to clean any spilled coolant, start the engine to check for proper operation and coolant leaks, and install the engine covers.
