How to install a crankshaft balancer in V6 engine on Chevrolet Camaro?

This procedure needs a new harmonic balancer bolt and a balancer installation tool that is accessible justified by specialized tool makers. First of all, you should pull the cable with the negative connection end off the battery. Lift up the front part of the vehicle until the weight is being borne on jackstands securely. Take out the belts and the splash shield. Third, take off the starter motor, turning the ring gear teeth on the flywheel/driveplate with a prybar coming through the rear of the engine block while loosening the center bolt of the harmonic balancer pulley. It is recommended that the balancer be pulled off the crankshaft with a three-jaw puller; it is important that the jaws do not grip the outer ring of the balancer but rather the hub of it. So as to avoid damaging the threads of the crankshaft, extend an Allen-head bolt into the crankshaft nose in which the taper of the puller will bear. Clean the oil seal end of the crankshaft with clean engine oil and then place the crankshaft pulley/harmonic balancer on the crankshaft making sure that the groove in the hub fits to the Woodruff key. Take the crankshaft and make sure that it is held firmly and try using the previous harmonic balancer bolt to fix the balancer on the crankshaft. Replace a harmonic balancer bolt and tighten to the next specified torque and angle in a two-step sequence with the torque angle gauge. The continuation of the installation is done in the reverse of the removal processes followed above.

Genuine Chevrolet Camaro Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

25 Harmonic Balancers found

View related parts
Chevrolet Camaro Balancer Assembly, Cr/Shf
Part Number: 12697768
$57.42 MSRP: $99.97
You Save: $42.55 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 12626355, 12674685, 12603181
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2024 Chevrolet Camaro | 2 DOOR CONVERTIBLE HI PERFORMANCE, 2 DOOR CONVERTIBLE HIGH PERFORMANCE, 2 DOOR COUPE HI PERFORMANCE, 2 DOOR COUPE HIGH PERFORMANCE | 8 Cyl 6.2L
View related parts
Chevrolet Camaro Balancer Assembly, Crankshaft
Part Number: 12675620
$237.61 MSRP: $378.98
You Save: $141.37 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BALANCER, Engine Crankshaft And Camshaft Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE | 8 Cyl 6.2L
View related parts
Chevrolet Camaro Balancer Assembly, Crankshaft
Part Number: 12675716
$443.41 MSRP: $771.74
You Save: $328.33 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Balancer, Crank Pulley, Vibration Damper
- Replaces: 12599862
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Camaro | SS 2 DOOR COUPE | 8 Cyl 7.0L
View related parts
Chevrolet Camaro Balancer Assembly, Crankshaft
Part Number: 12687728
$166.15 MSRP: $289.11
You Save: $122.96 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crank Pulley, Vibration Damper
- Replaces: 12668109
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1SS, 2 DOOR CONVERTIBLE 2SS, 2 DOOR COUPE 1SS, 2 DOOR COUPE 2SS | 8 Cyl 6.2L
View related parts
Chevrolet Camaro Balancer Assembly, Crankshaft
Part Number: 12674581
$560.81 MSRP: $976.06
You Save: $415.25 (43%)
ADD TO CART
Product Specifications
- Other Name: BALANCER, Engine Crankshaft And Camshaft Balancer; Crank Pulley, Vibration Damper
- Replaces: 12603916
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2015 Chevrolet Camaro | SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE | 8 Cyl 6.2L
View related parts
Chevrolet Camaro Balancer Assembly, Cr/Shf
Part Number: 25202078
$58.86 MSRP: $102.43
You Save: $43.57 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Balancer, Vibration Damper
- Replaces: 12657638, 12626962
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2023 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1LS/1LT, 2 DOOR CONVERTIBLE 1LT, 2 DOOR CONVERTIBLE 2LT, 2 DOOR COUPE 1LS/1LT, 2 DOOR COUPE 1LT, 2 DOOR COUPE 2LT | 4 Cyl 2.0L
View related parts
Chevrolet Camaro Balancer Assembly, Crankshaft
Part Number: 12551537
$79.51 MSRP: $197.65
You Save: $118.14 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BALANCER, Engine Crankshaft And Camshaft Balancer; Vibration Damper
- Replaces: 06272221, 6272221
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1992 Chevrolet Camaro | 2 DOOR, RS 2 DOOR, RS CONVERTIBLE | 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Camaro Balancer Assembly, Crankshaft
Part Number: 12713718
$388.12 MSRP: $613.43
You Save: $225.31 (37%)
ADD TO CART
Product Specifications
- Other Name: Balancer, Crank Pulley, Vibration Damper
- Replaces: 12687725, 12671006
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chevrolet Camaro | 2 DOOR CONVERTIBLE HI PERFORMANCE, 2 DOOR CONVERTIBLE HIGH PERFORMANCE, 2 DOOR COUPE HI PERFORMANCE, 2 DOOR COUPE HIGH PERFORMANCE | 8 Cyl 6.2L
View related parts
Chevrolet Camaro Balancer,Crankshaft
Part Number: 12615141
$66.58 MSRP: $115.89
You Save: $49.31 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BALANCER, Engine Crankshaft And Camshaft Balancer; Balancer, Crank Pulley, Vibration Damper
- Replaces: 12702117
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | 2 DOOR CONVERTIBLE, 2 DOOR COUPE, LS 2 DOOR COUPE, LT 2 DOOR CONVERTIBLE, LT 2 DOOR COUPE | 6 Cyl 3.6L
View related parts
Chevrolet Camaro PULLEY ASM,CR/SHF
Part Number: 19418897
$222.67 MSRP: $387.53
You Save: $164.86 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Pulley, Pulley
- Replaces: 10055879, 19367391
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1992 Chevrolet Camaro | 2 DOOR, RS 2 DOOR, RS CONVERTIBLE | 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Camaro Balancer Assembly, Cr/Shf
Part Number: 12700427
$69.43 MSRP: $109.22
You Save: $39.79 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 12648346, 12674649
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1LS/1LT, 2 DOOR CONVERTIBLE 1LT, 2 DOOR CONVERTIBLE 2LT, 2 DOOR COUPE 1LS/1LT, 2 DOOR COUPE 1LT, 2 DOOR COUPE 2LT | 6 Cyl 3.6L
View related parts
Chevrolet Camaro Pulley,Crankshaft
Part Number: 14023148
Product Specifications
- Other Name: PULLEY, Engine Crankshaft And Camshaft Balancer; Pulley
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1991 Chevrolet Camaro | 2 DOOR, 4 DOOR, RS 2 DOOR, RS CONVERTIBLE | 8 Cyl 5.0L
View related parts
Chevrolet Camaro Pulley Assembly, Crankshaft
Part Number: 14100594
Product Specifications
- Other Name: PULLEY, Engine Crankshaft And Camshaft Balancer; Pulley
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1995 Chevrolet Camaro | 2 DOOR, CONVERTIBLE, RS 2 DOOR, RS CONVERTIBLE | 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 3.4L
View related parts
Chevrolet Camaro Balancer Assembly, Crankshaft
Part Number: 12553118
Product Specifications
- Other Name: BALANCER, Engine Crankshaft And Camshaft Balancer; Balancer, Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Camaro Pulley Assembly, Crankshaft
Part Number: 14023145
Product Specifications
- Other Name: PULLEY, Engine Crankshaft And Camshaft Balancer; Pulley
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1986 Chevrolet Camaro | 2 DOOR, 4 DOOR | 8 Cyl 5.0L
View related parts
Chevrolet Camaro Pulley Assembly, Crankshaft
Part Number: 14088682
Product Specifications
- Other Name: PULLEY, Engine Crankshaft And Camshaft Balancer; Pulley
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1991 Chevrolet Camaro | 2 DOOR, RS 2 DOOR, RS CONVERTIBLE | 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Camaro Pulley Assembly, Crankshaft
Part Number: 10069912
Product Specifications
- Other Name: PULLEY, Engine Crankshaft And Camshaft Balancer; Pulley
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1986 Chevrolet Camaro | 2 DOOR, 4 DOOR | 8 Cyl 5.0L
View related parts
Chevrolet Camaro Pulley,Crankshaft
Part Number: 14033107
Product Specifications
- Other Name: PULLEY, Engine Crankshaft And Camshaft Balancer; Pulley
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1984 Chevrolet Camaro | 2 DOOR, 4 DOOR | 6 Cyl 2.8L
View related parts
Chevrolet Camaro Pulley Assembly, Crankshaft
Part Number: 14088683
Product Specifications
- Other Name: PULLEY, Engine Crankshaft And Camshaft Balancer; Pulley
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1991 Chevrolet Camaro | 2 DOOR, RS 2 DOOR, RS CONVERTIBLE | 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet Camaro Dampener,Crankshaft Torsion
Part Number: 14085401
Product Specifications
- Other Name: DAMPENER, Engine Crankshaft And Camshaft Balancer; Vibration Damper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1984 Chevrolet Camaro | 2 DOOR, 4 DOOR | 6 Cyl 2.8L

| Page 1 of 2 |Next >

1-20 of 25 Results

Chevrolet Camaro Harmonic Balancer

The Harmonic Balancer in Chevrolet Camaro vehicles helps in balancing the engine and in all also acting as a vibration dampener due to combustion. This component is also known as the vibration damper, which comprise of a metal hub fixed on the crankshaft with a thick metal inertia ring outside it and a rubber ring which provides flexibility to efficiently counteract with the twisting motion. I really wish I could find a copy of that photo again because that guy's crank was toast if that balancer broke due to heat and fluids over time acting on the rubber components. Chevrolet Camaro vehicles have inturn applied diverse forms of harmonic balancers, standard OE types and performance types. Whereas, OE harmonic balancers are standardized for the specific factory-mapped engine performance, performance harmonic balancers are set for upgraded performance engines and hence afford added defense against the increased vibrations in high RPMs. These performance options include the time-proven conventional, viscous, and adjustable multi-part configurations demonstrated for safety and reliability at high revolutions with other features such as the 360-degree timing marks to enable accurate engine setting.

Each OEM Chevrolet Camaro Harmonic Balancer we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Camaro Harmonic Balancer Parts Questions & Experts Answers

Balancer Assembly, Crankshaft
12674581
Q: How to install a crankshaft balancer in V6 engine on Chevrolet Camaro?
A: This procedure needs a new harmonic balancer bolt and a balancer installation tool that is accessible justified by specialized tool makers. First of all, you should pull the cable with the negative connection end off the battery. Lift up the front part of the vehicle until the weight is being borne on jackstands securely. Take out the belts and the splash shield. Third, take off the starter motor, turning the ring gear teeth on the Flywheel/driveplate with a prybar coming through the rear of the engine block while loosening the center bolt of the harmonic balancer pulley. It is recommended that the balancer be pulled off the crankshaft with a three-jaw puller; it is important that the jaws do not grip the outer ring of the balancer but rather the hub of it. So as to avoid damaging the threads of the crankshaft, extend an Allen-head bolt into the crankshaft nose in which the taper of the puller will bear. Clean the oil seal end of the crankshaft with clean engine oil and then place the crankshaft pulley/harmonic balancer on the crankshaft making sure that the groove in the hub fits to the Woodruff key. Take the crankshaft and make sure that it is held firmly and try using the previous harmonic balancer bolt to fix the balancer on the crankshaft. Replace a harmonic balancer bolt and tighten to the next specified torque and angle in a two-step sequence with the torque angle gauge. The continuation of the installation is done in the reverse of the removal processes followed above.

Related Chevrolet Camaro Parts

Browse by Year