A: To remove the Shock absorber, raise the rear of the vehicle and support it securely on jack stands. Block the front wheels so the vehicle doesn't roll off the stands. Remove the nuts and bolts from the frame bracket and remove the shock absorber. The installation is the reverse of removal.
A: To remove the upper shock mounting nut, use a wrench on the stem and take off the retainer and grommet. Lift the vehicle onto jackstands. From below, detach the two bolts from the shock absorber's lower end to the Control Arm. Pull the shock out and remove the lower grommet and retainer. To reinstall, reverse these steps, ensuring the mounting nut and bolts are tight. For 4WD models, raise the vehicle, remove the lower and upper shock mounting components, noting bolt directions. To install, follow the reverse order, ensuring bolts face the original direction and all fasteners are secure.