My Garage
My Account
Cart
Genuine Chevrolet Blazer Leaf Spring
Leaf Helper Spring- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Leaf Springs found
Chevrolet Blazer Leaf Spring
Chevrolet Blazer automobiles are provided with suspension related components named as Leaf Springs, which support the weight of the automobile and also allows them to reduce the shock and vibrations resulting from the uneven roads. All these historical components are made of arc shaped steel layers and the main leaf for the rolling of the ends for the direct chassis connection. The opposition between layers provides damping; nonetheless, certain producers use mono-leaf vane for increased control. It has facilities of direct frame mounting or mounting through a shackle in case of greater loads. Contemporary forms of vehicles like the Chevrolet Corvette use high-tech composite leaf springs for compact, light weight suspensions. Although these are among the simplest and most durable of all the established models, it is expedient to note that the implementation of leaf springs mathematically makes the car's ride rather rigid.
Each OEM Chevrolet Blazer Leaf Spring we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Blazer Leaf Spring Parts Questions & Experts Answers
- Q: How do you remove and replace the leaf springs and Leaf Spring Shackle on Chevrolet Blazer?A: To remove and replace the leaf springs on a vehicle, start by raising the rear of the vehicle and supporting it securely on jack stands. Block the front wheels to prevent the vehicle from rolling off the stands. Use a floor jack to support the axle and raise it slightly to relieve tension on the leaf springs. Remove the four U-bolt nuts and washers, followed by the anchor plate and U-bolts with a spacer. Raise the axle slightly off the springs with the floor jack. If the spring will be removed for an extended period, support the axle with jack stands. To reinstall, reverse the removal steps, gradually tightening the U-bolt nuts in a crisscross pattern and then tightening all fasteners to the specified torque. If the bushings at the ends of the spring are worn or deteriorated, they can be pressed out and replaced with new ones.
