Other Name: CLUTCH, Engine Air Cooling Fan; Clutch, Fan Clutch
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1994 Chevrolet Blazer | 1/2 TON | 8 Cyl 6.5L Diesel
Chevrolet Blazer Fan Clutch
The Fan Clutch on Chevrolet Blazer cars is an important part that controls the speed of the cooling fan to control the heat in the engine department. This thermostatic device enables the fan to run freely in lower temperatures; thus, minimizing the engine load for a faster warm-up. When the engine is warm the clutch begins to come into operation, allowing the fan to draw air past the radiator in order to cool the engine. While using the fan clutch, there are categories which include the viscous coupling type and the electronically controlled type, which are only controlled by the engine and environmental standards. In conclusion, the Fan Clutch has a very important function of improving the efficiency of cooling of the engine and other parts of Chevrolet Blazer model vehicles thereby boosting their efficiency.
Each OEM Chevrolet Blazer Fan Clutch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Blazer Fan Clutch Parts Questions & Experts Answers
Q: How do you remove the fan and clutch assembly on Chevrolet Blazer,S10,GMC Jimmy and Sonoma?
A: Disconnect the battery cable from the negative battery terminal. Then, take off the upper air intake duct, remove the upper fan shroud screws and take off the upper fan shroud. Next, remove the nuts holding the radiator fan/clutch assembly to the studs on the water pump. Hold the water pump pulley stationary and loosen the large nut retaining the radiator fan/clutch assembly to the water pump hub. Remove the fan and clutch. Off the vehicle, separate the fan from the clutch. Installation is the reverse of removal.