How to remove the air conditioning Evaporator?

To remove the air conditioning system, start by discharging the system and disconnecting the battery cable. Then, drain the cooling system and disconnect the air conditioning lines from the blower/evaporator housing. Remove the wiring connector at the blower motor resistor and the large wiring bundle clip. Take out the computer and coolant recovery tank, and move the relay mounting bracket. Remove the housing mounting nuts and bolts, and pull the housing forward to break the seal and remove it. Separate the upper and lower halves of the housing, and remove the condenser. Check the core for leaks and straighten any bent fins. If installing a new evaporator core, transfer the sealing gaskets. For installation, refill the cooling system and use new R-134a-compatible o-rings. Ensure the foam gasket is in place when reinstalling the housing. If a new evaporator is installed, add refrigerant oil and have the system evacuated, recharged, and leak tested.

Genuine Chevrolet Blazer Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Evaporators found

View related parts
Chevrolet Blazer Evaporator Kit, A/C
Part Number: 13435995
$101.07 MSRP: $212.34
You Save: $111.27 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: EVAPORATOR KIT, A/C Evaporator; Evaporator Core
- Replaces: 39095843
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2021 Chevrolet Blazer | HIGH COUNTRY/LTZ 4 DOOR SUV, L 4 DOOR SUV, LT 4 DOOR SUV, RS 4 DOOR SUV | 4 Cyl 2.0L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
Chevrolet Blazer Evaporator,A/C (W/Case)
Part Number: 3036687
Product Specifications
- Other Name: CORE, A/C Evaporator; Evaporator Core
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1991 Chevrolet Blazer | 1/2 TON | 6 Cyl 2.8L, 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel
View related parts
Chevrolet Blazer Evaporator Asm,A/C
Part Number: 88960668
Product Specifications
- Other Name: CORE, Evaporator; Evaporator Core
- Replaces: 3024972, 03024972
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1991 Chevrolet Blazer | 1/2 TON | 6 Cyl 2.8L, 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel
View related parts
Chevrolet Blazer Evaporator,A/C
Part Number: 52463741
Product Specifications
- Other Name: EVAPORATOR, A/C Evaporator; Evaporator Core
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Blazer | 2 DOOR, 4 DOOR | 6 Cyl 4.3L
View related parts
Chevrolet Blazer Evaporator,A/C
Part Number: 52478864
Product Specifications
- Other Name: EVAPORATOR, A/C Evaporator; Evaporator Core
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Blazer | 2 DOOR, 4 DOOR | 6 Cyl 4.3L
View related parts
Chevrolet Blazer Evaporator,A/C
Part Number: 52456123
Product Specifications
- Other Name: EVAPORATOR, A/C Evaporator; Evaporator, Evaporator Core
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Blazer | 1/2 TON | 6 Cyl 4.3L, 8 Cyl 5.7L

Chevrolet Blazer Evaporator Parts Questions & Experts Answers

Evaporator,A/C
52478864
Q: How to remove the air conditioning Evaporator?
A: To remove the air conditioning system, start by discharging the system and disconnecting the battery cable. Then, drain the cooling system and disconnect the air conditioning lines from the blower/evaporator housing. Remove the wiring connector at the blower motor resistor and the large wiring bundle clip. Take out the computer and coolant recovery tank, and move the relay mounting bracket. Remove the housing mounting nuts and bolts, and pull the housing forward to break the seal and remove it. Separate the upper and lower halves of the housing, and remove the condenser. Check the core for leaks and straighten any bent fins. If installing a new evaporator core, transfer the sealing gaskets. For installation, refill the cooling system and use new R-134a-compatible o-rings. Ensure the foam gasket is in place when reinstalling the housing. If a new evaporator is installed, add refrigerant oil and have the system evacuated, recharged, and leak tested.