How do you remove the MAP sensor on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

First, to remove the MAP sensor on V6 models, disconnect the electrical connector and pull the sensor from the intake manifold. Next, replace the sealing grommet if necessary, and use oil on the grommet during installation. For a V8 model, remove the intake manifold cover, disconnect the electrical connector, and remove the sensor.

Genuine Chevrolet Avalanche MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
Chevrolet Avalanche Sensor Assembly, Map
Part Number: 12711681
$42.36 MSRP: $87.96
You Save: $45.60 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 12594942, 12701247, 12644228, 12694725
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Chevrolet Avalanche | 1/2 TON | 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L
View related parts
Chevrolet Avalanche Sensor Assembly, Map
Part Number: 12614973
$70.48 MSRP: $139.84
You Save: $69.36 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Computer Control Sensors; Map Sensor
- Replaced by: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2008 Chevrolet Avalanche | 1/2 TON, 3/4 TON | 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 8.1L

Chevrolet Avalanche MAP Sensor Parts Questions & Experts Answers

Sensor Assembly, Map
12614973
Q: How do you remove the MAP sensor on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: First, to remove the MAP sensor on V6 models, disconnect the electrical connector and pull the sensor from the intake manifold. Next, replace the sealing grommet if necessary, and use oil on the grommet during installation. For a V8 model, remove the intake manifold cover, disconnect the electrical connector, and remove the sensor.