How to remove and install Door Handle, Door Latch Assembly,Door Lock Cylinder on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

Question

Accepted Answer

To remove and install various components of a vehicle's door, such as the latch, lock cylinder, outside handle, inside release handle, and latch strikers, certain steps must be followed. For standard doors, the latch rods must be detached from the lock cylinder, inside lock, and outside handle before removing the three Torx-head mounting screws and the latch from the door. Access doors use two latches, one at the top and one at the bottom, and require the removal of the trim around the latch to access it for removal or adjustment. The lock cylinder can be removed by prying off the retaining clip and withdrawing it from the door handle, while the outside handle requires the removal of the hole plug and bolts before detaching the rods for the lock cylinder and handle itself. The inside release handle must have its cable released and mounting fasteners removed, and latch strikers can be adjusted by loosening the bolts and moving the striker slightly before retightening and checking for proper latch operation.

Genuine Chevrolet Avalanche Door Lock Cylinder

3 Door Lock Cylinders found

Chevrolet Avalanche Cylinder Kit,Front Side Door Lock(Uncoded)

Chevrolet Avalanche Cylinder Asm,Front Side Door Lock

Chevrolet Avalanche Cylinder Kit, End Gate Lock (Uncoded)

Chevrolet Avalanche Door Lock Cylinder Parts Questions & Experts Answers

Related Chevrolet Avalanche Parts

Browse by Year