My Garage
My Account
Cart
Genuine Chevrolet Avalanche 4WD Actuator
Four-Wheel Drive Actuator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 4WD Actuator found
Chevrolet Avalanche Actuator,Front Drive Axle
Part Number: 26060073$138.82 MSRP: $241.60You Save: $102.78 (43%)Ships in 1-2 Business Days
Chevrolet Avalanche 4WD Actuator
It is designed to lock the differential and therefore activate the 4WD mode in Chevrolet Avalanche category of vehicles. This functionality is usually activated by a switch or a button; thus, the drivers can have a quick access to the extra control in different situations. Although the described information does not indicate various types or versions of 4WD Actuator in Avalanche models, the main equipment still does not differ much from one car to another; it is mostly based on the locking of the differential. This design guarantees that the vehicle will be in a position to change from 2WD to 4WD or the other way round depending on the nature of the terrain or driving conditions. In general, the 4WD Actuator plays a critical role in achieving dynamic results and control in Chevrolet Avalanche cars.
Each OEM Chevrolet Avalanche 4WD Actuator we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Avalanche 4WD Actuator Parts Questions & Experts Answers
- Q: How do you replace the shift motor from the axle tube on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?A: To remove the 4WD actuator from the axle tube, first raise the front of the vehicle and support it securely on jackstands. If equipped, remove the differential carrier splash shield. Then, disconnect the electrical connector from the 4WD actuator and unscrew the actuator from the axle tube. Before installing the actuator, coat the threads with RTV sealant and tighten it securely.
- Q: How to remove and install an electric shift motor/actuator assembly from Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL's transfer case?A: To remove the electric shift motor/4WD actuator assembly from a vehicle's Transfer Case, first raise the vehicle and place it securely on jackstands. Then, remove the stone shields from below the transfer case and unplug the shift motor electrical connector. Unscrew the retaining bolts and remove the assembly. To install, inspect the seal for damage and replace if necessary. Position the gasket and 4WD actuator in place on the transfer case and install the bolts, tightening them to the specified torque. Finally, reverse the removal steps.
