How to remove and install a shift cable?

To remove the shift cable, start by disconnecting the cable from the negative terminal of the battery. Apply the parking brake and block the wheels to prevent the vehicle from rolling. Raise the vehicle and secure it on jackstands. Under the vehicle, pry the cable end from the transmission control lever stud and remove the cable from the clip on the transmission oil pan. Remove the cable clips securing the cable to the body and the metal U-clip from the shift cable housing. Compress the locking tabs and pull the cable out of the bracket. Push the cable grommet out of the floorpan. Inside the vehicle, remove the driver's side knee bolster and lower steering column cover. Pry the cable end from the shift lever at the steering column and remove the metal U-clip from the cable housing at the bracket on the steering column. Working under the vehicle, remove the shift cable. To install the shift cable, follow the reverse steps of removal and perform the shift cable adjustment before securing the cable. To adjust the shift cable, apply the parking brake and block the wheels. Raise the vehicle and secure it on jackstands. Under the vehicle, pry the cable end from the transmission control lever stud and remove any retaining clips securing the cable. Place the transmission in Neutral and ensure the gear selector on the steering column is also in Neutral. While pulling the cable tight, pry the white colored body-core adjuster locking tab out from its locked position. Ensure the body-core adjuster moves freely by pulling on the cable. Make sure the gear selector and shift lever are still in Neutral and install the cable end onto the transmission manual control lever. Push the white colored locking tab into the body core until it snaps. Route the cable and install the cable retaining clips. Check the adjustment by ensuring all gears can be selected and the engine can only start in Park or Neutral. If necessary, readjust the shift cable or the Park/Neutral switch. Finally, place the gear selector in Park and lower the vehicle. Test drive to check for proper operation.

Genuine Chevrolet Astro Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Shift Cables found

View related parts
Chevrolet Astro Automatic Transmission Shifter Cable Assembly *Marked Print
Part Number: 15754075
$69.87 MSRP: $121.59
You Save: $51.72 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Automatic Transmission Range Selector Lever *Marked Print ; Cable, Transmission Shift Control Cable
- Replaces: 15033320
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2002 Chevrolet Astro | VAN ASTRO | 6 Cyl 4.3L
View related parts
Chevrolet Astro Automatic Transmission Throttle Valve Cable
Part Number: 14105719
$14.12 MSRP: $21.10
You Save: $6.98 (34%)
Product Specifications
- Other Name: Cable,Automatic Transmission Throttle Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1990 Chevrolet Astro | VAN ASTRO | 4 Cyl 2.5L, 6 Cyl 4.3L
View related parts
Chevrolet Astro Automatic Transmission Shifter Cable Assembly
Part Number: 10111682
Product Specifications
- Other Name: Cable Assembly, Automatic Transmission Television ; Cable, Transmission Throttle Valve Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1992 Chevrolet Astro | VAN ASTRO | 6 Cyl 4.3L
View related parts
Chevrolet Astro Automatic Transmission Shifter Cable Assembly
Part Number: 25517312
Product Specifications
- Other Name: Cable Asm,Automatic Transmission Throttle Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1989 Chevrolet Astro | VAN ASTRO | 4 Cyl 2.5L, 6 Cyl 4.3L
View related parts
Chevrolet Astro Automatic Transmission Throttle Valve Cable Assembly
Part Number: 25521268
Product Specifications
- Other Name: Cable Assembly, Automatic Transmission Throttle Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1990 Chevrolet Astro | VAN ASTRO | 4 Cyl 2.5L, 6 Cyl 4.3L
View related parts
Chevrolet Astro Automatic Transmission Shifter Cable
Part Number: 16142696
Product Specifications
- Other Name: Cable,Shift Indicator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1988 Chevrolet Astro | VAN ASTRO | 4 Cyl 2.5L, 6 Cyl 4.3L
View related parts
Chevrolet Astro Automatic Transmission Shifter Cable Assembly
Part Number: 14102001
Product Specifications
- Other Name: Cable Asm,Automatic Transmission Throttle Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1989 Chevrolet Astro | VAN ASTRO | 4 Cyl 2.5L, 6 Cyl 4.3L
View related parts
Chevrolet Astro Automatic Transmission Throttle Valve Cable Assembly
Part Number: 10142019
Product Specifications
- Other Name: Cable Assembly, Automatic Transmission Throttle Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 Chevrolet Astro | VAN ASTRO | 6 Cyl 4.3L
View related parts
Chevrolet Astro Automatic Transmission Range Select Lever Kit
Part Number: 26037449
Product Specifications
- Other Name: Cable Kit,Steering Column Brake Trns Shift Interlock; Interlock Solenoid Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chevrolet Astro | VAN ASTRO | 6 Cyl 4.3L
View related parts
Chevrolet Astro Automatic Transmission Range Selector Lever Cable Assembly
Part Number: 15245760
Product Specifications
- Other Name: Cable Assembly, Automatic Transmission Range Selector Lever ; Cable, Transmission Shift Control Cable
- Replaces: 15189019
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chevrolet Astro | VAN ASTRO | 6 Cyl 4.3L
View related parts
Chevrolet Astro Automatic Transmission Range Selector Lever Cable Assembly
Part Number: 15733420
Product Specifications
- Other Name: Cable Assembly, Automatic Transmission Range Selector Lever ; Cable, Transmission Shift Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Astro | VAN ASTRO | 6 Cyl 4.3L

Chevrolet Astro Shift Cable

Each OEM Chevrolet Astro Shift Cable we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Astro Shift Cable Parts Questions & Experts Answers

Automatic Transmission Throttle Valve Cable
14105719
Q: How to remove and install a shift cable?
A: To remove the shift cable, start by disconnecting the cable from the negative terminal of the battery. Apply the parking brake and block the wheels to prevent the vehicle from rolling. Raise the vehicle and secure it on jackstands. Under the vehicle, pry the cable end from the transmission control lever stud and remove the cable from the clip on the transmission oil pan. Remove the cable clips securing the cable to the body and the metal U-clip from the shift cable housing. Compress the locking tabs and pull the cable out of the bracket. Push the cable grommet out of the floorpan. Inside the vehicle, remove the driver's side knee bolster and lower steering column cover. Pry the cable end from the shift lever at the steering column and remove the metal U-clip from the cable housing at the bracket on the steering column. Working under the vehicle, remove the shift cable. To install the shift cable, follow the reverse steps of removal and perform the shift cable adjustment before securing the cable. To adjust the shift cable, apply the parking brake and block the wheels. Raise the vehicle and secure it on jackstands. Under the vehicle, pry the cable end from the transmission control lever stud and remove any retaining clips securing the cable. Place the transmission in Neutral and ensure the gear selector on the steering column is also in Neutral. While pulling the cable tight, pry the white colored body-core adjuster locking tab out from its locked position. Ensure the body-core adjuster moves freely by pulling on the cable. Make sure the gear selector and shift lever are still in Neutral and install the cable end onto the transmission manual control lever. Push the white colored locking tab into the body core until it snaps. Route the cable and install the cable retaining clips. Check the adjustment by ensuring all gears can be selected and the engine can only start in Park or Neutral. If necessary, readjust the shift cable or the Park/Neutral switch. Finally, place the gear selector in Park and lower the vehicle. Test drive to check for proper operation.